diff mbox series

[3/4] dt-bindings: soc: qcom: Add RSC power domain specifier

Message ID 20190813082442.25796-4-mkshah@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Add RSC power domain support | expand

Commit Message

Maulik Shah Aug. 13, 2019, 8:24 a.m. UTC
In addition to transmitting resource state requests to the remote
processor, the RSC is responsible for powering off/lowering the
requirements from CPUs subsystem for the associated hardware like
buses, clocks, and regulators when all CPUs and cluster is powered down.

The power domain is configured to a low power state and when all the
CPUs are powered down, the RSC can lower resource state requirements
and power down the rails that power the CPUs.

Add PM domain specifier property for RSC controller.

Cc: devicetree@vger.kernel.org
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Stephen Boyd Aug. 14, 2019, 6:02 p.m. UTC | #1
Quoting Maulik Shah (2019-08-13 01:24:41)
> In addition to transmitting resource state requests to the remote
> processor, the RSC is responsible for powering off/lowering the
> requirements from CPUs subsystem for the associated hardware like
> buses, clocks, and regulators when all CPUs and cluster is powered down.
> 
> The power domain is configured to a low power state and when all the
> CPUs are powered down, the RSC can lower resource state requirements
> and power down the rails that power the CPUs.
> 
> Add PM domain specifier property for RSC controller.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt b/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
index 9b86d1eff219..d0ab6e9b6745 100644
--- a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
@@ -83,6 +83,13 @@  Properties:
 	Value type: <string>
 	Definition: Name for the RSC. The name would be used in trace logs.
 
+- #power-domain-cells:
+	Usage: optional
+	Value type: <u32>
+	Definition: Number of cells in power domain specifier. Optional for
+		    controllers that may be in 'solver' state where they can
+		    be in autonomous mode executing low power modes.
+
 Drivers that want to use the RSC to communicate with RPMH must specify their
 bindings as child nodes of the RSC controllers they wish to communicate with.
 
@@ -112,6 +119,7 @@  TCS-OFFSET: 0xD00
 				  <SLEEP_TCS   3>,
 				  <WAKE_TCS    3>,
 				  <CONTROL_TCS 1>;
+		#power-domain-cells = <0>;
 	};
 
 Example 2: