Message ID | 20190820144052.18269-1-narmstrong@baylibre.com (mailing list archive) |
---|---|
Headers | show |
Series | arm64: Add support for Amlogic SM1 SoC Family | expand |
Neil Armstrong <narmstrong@baylibre.com> writes: > The new Amlogic SM1 SoC Family is a derivative of the Amlogic G12A > SoC Family, with the following changes : > - Cortex-A55 cores instead of A53 > - more power domains, including USB & PCIe > - a neural network co-processor (NNA) > - a CSI input and image processor > - some changes in the audio complex, thus not yet enabled > - new clocks, for NNA, CSI and a clock tree for each CPU Core > > This serie does not add support for NNA, CSI, Audio, USB, Display > or DVFS, it only aligns with the current G12A Support. > > With this serie, the SEI610 Board has supported : > - Default-boot CPU frequency > - Ethernet > - LEDs > - IR > - GPIO Buttons > - eMMC > - SDCard > - SDIO WiFi > - UART Bluetooth > > Audio (HDMI, Embedded HP, MIcs), USB, HDMI, IR Output, & RGB Led > would be supported in following patchsets. > > Dependencies: > - g12-common.dtsi from the DVFS patchset at [1] > > Changes from rfc at [2]: > - Removed Power domain patches & display/USB support, will resend separately > - Removed applied AO-CEC patches > - Fixed clk-measure IDs > - Collected reviewed-by tags > > [1] https://patchwork.kernel.org/cover/11025309/ > [2] https://patchwork.kernel.org/cover/11025511/ Series queued for v5.4... > Neil Armstrong (6): > soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs > dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible > soc: amlogic: clk-measure: Add support for SM1 ... these 3 in v5.4/drivers ... > dt-bindings: arm: amlogic: add SM1 bindings > dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings > arm64: dts: add support for SM1 based SEI Robotics SEI610 ... and these 3 in v5.4/dt64 with Rob's tag. Thanks, Kevin
Kevin Hilman <khilman@baylibre.com> writes: > Neil Armstrong <narmstrong@baylibre.com> writes: > >> The new Amlogic SM1 SoC Family is a derivative of the Amlogic G12A >> SoC Family, with the following changes : >> - Cortex-A55 cores instead of A53 >> - more power domains, including USB & PCIe >> - a neural network co-processor (NNA) >> - a CSI input and image processor >> - some changes in the audio complex, thus not yet enabled >> - new clocks, for NNA, CSI and a clock tree for each CPU Core >> >> This serie does not add support for NNA, CSI, Audio, USB, Display >> or DVFS, it only aligns with the current G12A Support. >> >> With this serie, the SEI610 Board has supported : >> - Default-boot CPU frequency >> - Ethernet >> - LEDs >> - IR >> - GPIO Buttons >> - eMMC >> - SDCard >> - SDIO WiFi >> - UART Bluetooth >> >> Audio (HDMI, Embedded HP, MIcs), USB, HDMI, IR Output, & RGB Led >> would be supported in following patchsets. >> >> Dependencies: >> - g12-common.dtsi from the DVFS patchset at [1] >> >> Changes from rfc at [2]: >> - Removed Power domain patches & display/USB support, will resend separately >> - Removed applied AO-CEC patches >> - Fixed clk-measure IDs >> - Collected reviewed-by tags >> >> [1] https://patchwork.kernel.org/cover/11025309/ >> [2] https://patchwork.kernel.org/cover/11025511/ > > Series queued for v5.4... >> Neil Armstrong (6): >> soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs >> dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible >> soc: amlogic: clk-measure: Add support for SM1 > > ... these 3 in v5.4/drivers ... > >> dt-bindings: arm: amlogic: add SM1 bindings >> dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings >> arm64: dts: add support for SM1 based SEI Robotics SEI610 > > ... and these 3 in v5.4/dt64 with Rob's tag. And I forgot to add that I boot-tested this on an SEI610 as well. Tested-by: Kevin Hilman <khilman@baylibre.com>