diff mbox series

[v3,3/7] usb: mtu3: support ip-sleep wakeup for MT8183

Message ID 1567150854-30033-4-git-send-email-chunfeng.yun@mediatek.com (mailing list archive)
State New, archived
Headers show
Series add support USB for MT8183 | expand

Commit Message

Chunfeng Yun (云春峰) Aug. 30, 2019, 7:40 a.m. UTC 
Support USB wakeup by ip-sleep mode for MT8183, it's similar to
MT8173

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v3: changes micros define

v2: no changes
---
 drivers/usb/mtu3/mtu3_host.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

Comments

Guenter Roeck Sept. 11, 2019, 6:44 p.m. UTC | #1 
On Fri, Aug 30, 2019 at 03:40:50PM +0800, Chunfeng Yun wrote:
> Support USB wakeup by ip-sleep mode for MT8183, it's similar to
> MT8173
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v3: changes micros define
> 
> v2: no changes
> ---
>  drivers/usb/mtu3/mtu3_host.c | 14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
> index c871b94f3e6f..4f8208885ebd 100644
> --- a/drivers/usb/mtu3/mtu3_host.c
> +++ b/drivers/usb/mtu3/mtu3_host.c
> @@ -18,6 +18,12 @@
>  #include "mtu3.h"
>  #include "mtu3_dr.h"
>  
> +/* mt8183 etc */
> +#define PERI_WK_CTRL0	0x20
> +#define WC0_IS_C(x)	(((x) & 0xf) << 28)  /* cycle debounce */
> +#define WC0_IS_P	BIT(12)	/* polarity */
> +#define WC0_IS_EN	BIT(6)
> +

For 64-bit builds, this results in:

drivers/usb/mtu3/mtu3_host.c: In function ‘ssusb_wakeup_ip_sleep_set’:
./include/linux/bits.h:6:19: warning:
	conversion from ‘long unsigned int’ to ‘u32’ {aka ‘unsigned int’}
	changes value from ‘18446744073441120320’ to ‘4026536000’ [-Woverflow]

since WC0_IS_C() is sign extended to 64 bit and then truncated.

Observed with gcc 7.4.0 and 8.3.0.

Guenter

>  /* mt8173 etc */
>  #define PERI_WK_CTRL1	0x4
>  #define WC1_IS_C(x)	(((x) & 0xf) << 26)  /* cycle debounce */
> @@ -30,7 +36,8 @@
>  #define SSC_SPM_INT_EN		BIT(1)
>  
>  enum ssusb_uwk_vers {
> -	SSUSB_UWK_V1 = 1,
> +	SSUSB_UWK_V0 = 0,
> +	SSUSB_UWK_V1,
>  	SSUSB_UWK_V2,
>  };
>  
> @@ -43,6 +50,11 @@ static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
>  	u32 reg, msk, val;
>  
>  	switch (ssusb->uwk_vers) {
> +	case SSUSB_UWK_V0:
> +		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0;
> +		msk = WC0_IS_EN | WC0_IS_C(0xf) | WC0_IS_P;
> +		val = enable ? (WC0_IS_EN | WC0_IS_C(0x8)) : 0;
> +		break;
>  	case SSUSB_UWK_V1:
>  		reg = ssusb->uwk_reg_base + PERI_WK_CTRL1;
>  		msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
Chunfeng Yun (云春峰) Sept. 16, 2019, 5:45 a.m. UTC | #2 
On Wed, 2019-09-11 at 11:44 -0700, Guenter Roeck wrote:
> On Fri, Aug 30, 2019 at 03:40:50PM +0800, Chunfeng Yun wrote:
> > Support USB wakeup by ip-sleep mode for MT8183, it's similar to
> > MT8173
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > v3: changes micros define
> > 
> > v2: no changes
> > ---
> >  drivers/usb/mtu3/mtu3_host.c | 14 +++++++++++++-
> >  1 file changed, 13 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
> > index c871b94f3e6f..4f8208885ebd 100644
> > --- a/drivers/usb/mtu3/mtu3_host.c
> > +++ b/drivers/usb/mtu3/mtu3_host.c
> > @@ -18,6 +18,12 @@
> >  #include "mtu3.h"
> >  #include "mtu3_dr.h"
> >  
> > +/* mt8183 etc */
> > +#define PERI_WK_CTRL0	0x20
> > +#define WC0_IS_C(x)	(((x) & 0xf) << 28)  /* cycle debounce */
> > +#define WC0_IS_P	BIT(12)	/* polarity */
> > +#define WC0_IS_EN	BIT(6)
> > +
> 
> For 64-bit builds, this results in:
> 
> drivers/usb/mtu3/mtu3_host.c: In function ‘ssusb_wakeup_ip_sleep_set’:
> ./include/linux/bits.h:6:19: warning:
> 	conversion from ‘long unsigned int’ to ‘u32’ {aka ‘unsigned int’}
> 	changes value from ‘18446744073441120320’ to ‘4026536000’ [-Woverflow]
> 
> since WC0_IS_C() is sign extended to 64 bit and then truncated.
Got it, thanks a lot

> 
> Observed with gcc 7.4.0 and 8.3.0.
> 
> Guenter
> 
> >  /* mt8173 etc */
> >  #define PERI_WK_CTRL1	0x4
> >  #define WC1_IS_C(x)	(((x) & 0xf) << 26)  /* cycle debounce */
> > @@ -30,7 +36,8 @@
> >  #define SSC_SPM_INT_EN		BIT(1)
> >  
> >  enum ssusb_uwk_vers {
> > -	SSUSB_UWK_V1 = 1,
> > +	SSUSB_UWK_V0 = 0,
> > +	SSUSB_UWK_V1,
> >  	SSUSB_UWK_V2,
> >  };
> >  
> > @@ -43,6 +50,11 @@ static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
> >  	u32 reg, msk, val;
> >  
> >  	switch (ssusb->uwk_vers) {
> > +	case SSUSB_UWK_V0:
> > +		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0;
> > +		msk = WC0_IS_EN | WC0_IS_C(0xf) | WC0_IS_P;
> > +		val = enable ? (WC0_IS_EN | WC0_IS_C(0x8)) : 0;
> > +		break;
> >  	case SSUSB_UWK_V1:
> >  		reg = ssusb->uwk_reg_base + PERI_WK_CTRL1;
> >  		msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
diff mbox series

Patch

diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
index c871b94f3e6f..4f8208885ebd 100644
--- a/drivers/usb/mtu3/mtu3_host.c
+++ b/drivers/usb/mtu3/mtu3_host.c
@@ -18,6 +18,12 @@ 
 #include "mtu3.h"
 #include "mtu3_dr.h"
 
+/* mt8183 etc */
+#define PERI_WK_CTRL0	0x20
+#define WC0_IS_C(x)	(((x) & 0xf) << 28)  /* cycle debounce */
+#define WC0_IS_P	BIT(12)	/* polarity */
+#define WC0_IS_EN	BIT(6)
+
 /* mt8173 etc */
 #define PERI_WK_CTRL1	0x4
 #define WC1_IS_C(x)	(((x) & 0xf) << 26)  /* cycle debounce */
@@ -30,7 +36,8 @@ 
 #define SSC_SPM_INT_EN		BIT(1)
 
 enum ssusb_uwk_vers {
-	SSUSB_UWK_V1 = 1,
+	SSUSB_UWK_V0 = 0,
+	SSUSB_UWK_V1,
 	SSUSB_UWK_V2,
 };
 
@@ -43,6 +50,11 @@  static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
 	u32 reg, msk, val;
 
 	switch (ssusb->uwk_vers) {
+	case SSUSB_UWK_V0:
+		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0;
+		msk = WC0_IS_EN | WC0_IS_C(0xf) | WC0_IS_P;
+		val = enable ? (WC0_IS_EN | WC0_IS_C(0x8)) : 0;
+		break;
 	case SSUSB_UWK_V1:
 		reg = ssusb->uwk_reg_base + PERI_WK_CTRL1;
 		msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;