diff mbox series

ARM: dts: imx6: Extend support for Phytec phycore i.MX6ULL SoM

Message ID 20190912202928.946200-1-pn@denx.de (mailing list archive)
State New, archived
Headers show
Series ARM: dts: imx6: Extend support for Phytec phycore i.MX6ULL SoM | expand

Commit Message

Parthiban Nallathambi Sept. 12, 2019, 8:29 p.m. UTC 
Extend Phycore i.MX6UL SoM for i.MX6ULL with on board eMMC. Phycore
i.MX6ULL is deployed with same carrier board Segin as the pins are
compatible with UL version.

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
---
 arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi   | 26 +++++++++++++++++--
 .../dts/imx6ul-phytec-phyboard-segin-full.dts |  5 ++++
 arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi  | 24 +++++++++++++++++
 3 files changed, 53 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi

Comments

Shawn Guo Oct. 6, 2019, 8:23 a.m. UTC | #1 
On Thu, Sep 12, 2019 at 10:29:28PM +0200, Parthiban Nallathambi wrote:
> Extend Phycore i.MX6UL SoM for i.MX6ULL with on board eMMC. Phycore
> i.MX6ULL is deployed with same carrier board Segin as the pins are
> compatible with UL version.
> 
> Signed-off-by: Parthiban Nallathambi <pn@denx.de>

What is the base that the patch was generated from?  It doesn't apply to
my tree.

Shawn

> ---
>  arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi   | 26 +++++++++++++++++--
>  .../dts/imx6ul-phytec-phyboard-segin-full.dts |  5 ++++
>  arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi  | 24 +++++++++++++++++
>  3 files changed, 53 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
> 
> diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
> index fc2997449b49..822a178ce438 100644
> --- a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
> +++ b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
> @@ -7,7 +7,6 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/pwm/pwm.h>
> -#include "imx6ul.dtsi"
>  
>  / {
>  	model = "Phytec phyCORE i.MX6 UltraLite";
> @@ -65,7 +64,7 @@
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_gpmi_nand>;
>  	nand-on-flash-bbt;
> -	status = "okay";
> +	status = "disabled";
>  };
>  
>  &i2c1 {
> @@ -90,6 +89,15 @@
>  	status = "okay";
>  };
>  
> +&usdhc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc2>;
> +	bus-width = <8>;
> +	no-1-8-v;
> +	non-removable;
> +	status = "disabled";
> +};
> +
>  &iomuxc {
>  	pinctrl_enet1: enet1grp {
>  		fsl,pins = <
> @@ -145,4 +153,18 @@
>  		>;
>  	};
>  
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
> +			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
> +			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
> +			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
> +			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
> +			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
> +			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
> +			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
> +			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
> +			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
> +		>;
> +	};
>  };
> diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
> index b6a1407a9d44..76f2447f2657 100644
> --- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
> +++ b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
> @@ -5,6 +5,7 @@
>   */
>  
>  /dts-v1/;
> +#include "imx6ul.dtsi"
>  #include "imx6ul-phytec-pcl063.dtsi"
>  #include "imx6ul-phytec-phyboard-segin.dtsi"
>  #include "imx6ul-phytec-peb-eval-01.dtsi"
> @@ -37,6 +38,10 @@
>  	status = "okay";
>  };
>  
> +&gpmi {
> +	status = "okay";
> +};
> +
>  &i2c_rtc {
>  	status = "okay";
>  };
> diff --git a/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
> new file mode 100644
> index 000000000000..3f749d9f09a5
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
> @@ -0,0 +1,24 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2018 PHYTEC Messtechnik GmbH
> + * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
> + */
> +
> +#include "imx6ul-phytec-pcl063.dtsi"
> +
> +/ {
> +	model = "PHYTEC phyCORE-i.MX 6ULL";
> +	compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
> +};
> +
> +&iomuxc {
> +	/delete-node/ gpioledssomgrp;
> +};
> +
> +&iomuxc_snvs {
> +	pinctrl_gpioleds_som: gpioledssomgrp {
> +		fsl,pins = <
> +			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
> +		>;
> +	};
> +};
> -- 
> 2.21.0
>
Parthiban Nallathambi Oct. 7, 2019, 10:42 a.m. UTC | #2 
On 10/6/19 10:23 AM, Shawn Guo wrote:
> On Thu, Sep 12, 2019 at 10:29:28PM +0200, Parthiban Nallathambi wrote:
>> Extend Phycore i.MX6UL SoM for i.MX6ULL with on board eMMC. Phycore
>> i.MX6ULL is deployed with same carrier board Segin as the pins are
>> compatible with UL version.
>>
>> Signed-off-by: Parthiban Nallathambi <pn@denx.de>
> 
> What is the base that the patch was generated from?  It doesn't apply to
> my tree.

It was based on prior to 5.4 merge window. But there are series of patch
which renamed the filename and the changes are already part of mainline
from Phytec.

Please ignore this patch.

Thanks,
Parthiban N

> 
> Shawn
> 
>> ---
>>   arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi   | 26 +++++++++++++++++--
>>   .../dts/imx6ul-phytec-phyboard-segin-full.dts |  5 ++++
>>   arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi  | 24 +++++++++++++++++
>>   3 files changed, 53 insertions(+), 2 deletions(-)
>>   create mode 100644 arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
>>
>> diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
>> index fc2997449b49..822a178ce438 100644
>> --- a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
>> +++ b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
>> @@ -7,7 +7,6 @@
>>   #include <dt-bindings/gpio/gpio.h>
>>   #include <dt-bindings/interrupt-controller/irq.h>
>>   #include <dt-bindings/pwm/pwm.h>
>> -#include "imx6ul.dtsi"
>>   
>>   / {
>>   	model = "Phytec phyCORE i.MX6 UltraLite";
>> @@ -65,7 +64,7 @@
>>   	pinctrl-names = "default";
>>   	pinctrl-0 = <&pinctrl_gpmi_nand>;
>>   	nand-on-flash-bbt;
>> -	status = "okay";
>> +	status = "disabled";
>>   };
>>   
>>   &i2c1 {
>> @@ -90,6 +89,15 @@
>>   	status = "okay";
>>   };
>>   
>> +&usdhc2 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_usdhc2>;
>> +	bus-width = <8>;
>> +	no-1-8-v;
>> +	non-removable;
>> +	status = "disabled";
>> +};
>> +
>>   &iomuxc {
>>   	pinctrl_enet1: enet1grp {
>>   		fsl,pins = <
>> @@ -145,4 +153,18 @@
>>   		>;
>>   	};
>>   
>> +	pinctrl_usdhc2: usdhc2grp {
>> +		fsl,pins = <
>> +			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
>> +			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
>> +			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
>> +			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
>> +			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
>> +			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
>> +			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
>> +			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
>> +			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
>> +			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
>> +		>;
>> +	};
>>   };
>> diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
>> index b6a1407a9d44..76f2447f2657 100644
>> --- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
>> +++ b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
>> @@ -5,6 +5,7 @@
>>    */
>>   
>>   /dts-v1/;
>> +#include "imx6ul.dtsi"
>>   #include "imx6ul-phytec-pcl063.dtsi"
>>   #include "imx6ul-phytec-phyboard-segin.dtsi"
>>   #include "imx6ul-phytec-peb-eval-01.dtsi"
>> @@ -37,6 +38,10 @@
>>   	status = "okay";
>>   };
>>   
>> +&gpmi {
>> +	status = "okay";
>> +};
>> +
>>   &i2c_rtc {
>>   	status = "okay";
>>   };
>> diff --git a/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
>> new file mode 100644
>> index 000000000000..3f749d9f09a5
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
>> @@ -0,0 +1,24 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (C) 2018 PHYTEC Messtechnik GmbH
>> + * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
>> + */
>> +
>> +#include "imx6ul-phytec-pcl063.dtsi"
>> +
>> +/ {
>> +	model = "PHYTEC phyCORE-i.MX 6ULL";
>> +	compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
>> +};
>> +
>> +&iomuxc {
>> +	/delete-node/ gpioledssomgrp;
>> +};
>> +
>> +&iomuxc_snvs {
>> +	pinctrl_gpioleds_som: gpioledssomgrp {
>> +		fsl,pins = <
>> +			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
>> +		>;
>> +	};
>> +};
>> -- 
>> 2.21.0
>>
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
index fc2997449b49..822a178ce438 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
@@ -7,7 +7,6 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
-#include "imx6ul.dtsi"
 
 / {
 	model = "Phytec phyCORE i.MX6 UltraLite";
@@ -65,7 +64,7 @@ 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
 	nand-on-flash-bbt;
-	status = "okay";
+	status = "disabled";
 };
 
 &i2c1 {
@@ -90,6 +89,15 @@ 
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled";
+};
+
 &iomuxc {
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
@@ -145,4 +153,18 @@ 
 		>;
 	};
 
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
index b6a1407a9d44..76f2447f2657 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
@@ -5,6 +5,7 @@ 
  */
 
 /dts-v1/;
+#include "imx6ul.dtsi"
 #include "imx6ul-phytec-pcl063.dtsi"
 #include "imx6ul-phytec-phyboard-segin.dtsi"
 #include "imx6ul-phytec-peb-eval-01.dtsi"
@@ -37,6 +38,10 @@ 
 	status = "okay";
 };
 
+&gpmi {
+	status = "okay";
+};
+
 &i2c_rtc {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
new file mode 100644
index 000000000000..3f749d9f09a5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
@@ -0,0 +1,24 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-pcl063.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX 6ULL";
+	compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&iomuxc {
+	/delete-node/ gpioledssomgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
+		>;
+	};
+};