[v4,01/14] drm/mxsfb: Update mxsfb to support a bridge

Message ID	1567078215-31601-2-git-send-email-robert.chiras@nxp.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <SRS0=/quW=W2=lists.freedesktop.org=dri-devel-bounces@kernel.org> DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 58BE321874 From: Robert Chiras <robert.chiras@nxp.com> To: =?utf-8?q?Guido_G=C3=BCnther?= <agx@sigxcpu.org>, Marek Vasut <marex@denx.de>, Stefan Agner <stefan@agner.ch>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Fabio Estevam <festevam@gmail.com> Subject: [PATCH v4 01/14] drm/mxsfb: Update mxsfb to support a bridge Date: Thu, 29 Aug 2019 14:30:02 +0300 Message-Id: <1567078215-31601-2-git-send-email-robert.chiras@nxp.com> In-Reply-To: <1567078215-31601-1-git-send-email-robert.chiras@nxp.com> References: <1567078215-31601-1-git-send-email-robert.chiras@nxp.com> MIME-Version: 1.0 Precedence: list Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, linux-arm-kernel@lists.infradead.org Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" <dri-devel-bounces@lists.freedesktop.org>
Series	Improvements and fixes for mxsfb DRM driver \| expand [v4,00/14] Improvements and fixes for mxsfb DRM driver [v4,01/14] drm/mxsfb: Update mxsfb to support a bridge [v4,02/14] drm/mxsfb: Read bus flags from bridge if present [v4,03/14] drm/mxsfb: Add defines for the rest of registers [v4,04/14] drm/mxsfb: Reset vital registers for a proper initialization [v4,05/14] drm/mxsfb: Update register definitions using bit manipulation defines [v4,06/14] drm/mxsfb: Update mxsfb with additional pixel formats [v4,07/14] drm/mxsfb: Signal mode changed when bpp changed [v4,08/14] drm/mxsfb: Add max-memory-bandwidth property for MXSFB [v4,09/14] dt-bindings: display: Add max-memory-bandwidth property for mxsfb [v4,10/14] drm/mxsfb: Update mxsfb to support LCD reset [v4,11/14] drm/mxsfb: Improve the axi clock usage [v4,12/14] drm/mxsfb: Clear OUTSTANDING_REQS bits [v4,13/14] drm/mxsfb: Add support for horizontal stride [v4,14/14] drm/mxsfb: Add support for live pixel format change

Message ID

1567078215-31601-2-git-send-email-robert.chiras@nxp.com (mailing list archive)

State

New, archived

Headers

DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 58BE321874
From: Robert Chiras <robert.chiras@nxp.com>
To: =?utf-8?q?Guido_G=C3=BCnther?= <agx@sigxcpu.org>,
 Marek Vasut <marex@denx.de>, Stefan Agner <stefan@agner.ch>,
 David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
 Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
 Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>,
 Fabio Estevam <festevam@gmail.com>
Subject: [PATCH v4 01/14] drm/mxsfb: Update mxsfb to support a bridge
Date: Thu, 29 Aug 2019 14:30:02 +0300
Message-Id: <1567078215-31601-2-git-send-email-robert.chiras@nxp.com>
In-Reply-To: <1567078215-31601-1-git-send-email-robert.chiras@nxp.com>
References: <1567078215-31601-1-git-send-email-robert.chiras@nxp.com>
MIME-Version: 1.0
Precedence: list
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
 dri-devel@lists.freedesktop.org, NXP Linux Team <linux-imx@nxp.com>,
 Pengutronix Kernel Team <kernel@pengutronix.de>,
 linux-arm-kernel@lists.infradead.org
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: base64
Errors-To: dri-devel-bounces@lists.freedesktop.org
Sender: "dri-devel" <dri-devel-bounces@lists.freedesktop.org>

Series

Improvements and fixes for mxsfb DRM driver | expand

Commit Message

Robert Chiras Aug. 29, 2019, 11:30 a.m. UTC

Currently, the MXSFB DRM driver only supports a panel. But, its output
display signal can also be redirected to another encoder, like a DSI
controller. In this case, that DSI controller may act like a drm_bridge.
In order support this use-case too, this patch adds support for drm_bridge
in mxsfb.

Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Tested-by: Guido Günther <agx@sigxcpu.org>
---
 drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 17 +++++++++++---
 drivers/gpu/drm/mxsfb/mxsfb_drv.c  | 46 +++++++++++++++++++++++++++++++++-----
 drivers/gpu/drm/mxsfb/mxsfb_drv.h  |  4 +++-
 drivers/gpu/drm/mxsfb/mxsfb_out.c  | 26 +++++++++++----------
 4 files changed, 72 insertions(+), 21 deletions(-)

Comments

Stefan Agner Oct. 14, 2019, 8:23 p.m. UTC | #1

On 2019-08-29 13:30, Robert Chiras wrote:
> Currently, the MXSFB DRM driver only supports a panel. But, its output
> display signal can also be redirected to another encoder, like a DSI
> controller. In this case, that DSI controller may act like a drm_bridge.
> In order support this use-case too, this patch adds support for drm_bridge
> in mxsfb.
> 
> Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
> Tested-by: Guido Günther <agx@sigxcpu.org>

Applied to the drm-misc-next branch.

--
Stefan

> ---
>  drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 17 +++++++++++---
>  drivers/gpu/drm/mxsfb/mxsfb_drv.c  | 46 +++++++++++++++++++++++++++++++++-----
>  drivers/gpu/drm/mxsfb/mxsfb_drv.h  |  4 +++-
>  drivers/gpu/drm/mxsfb/mxsfb_out.c  | 26 +++++++++++----------
>  4 files changed, 72 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> index 1242156..de09b93 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> @@ -95,8 +95,11 @@ static void mxsfb_set_bus_fmt(struct
> mxsfb_drm_private *mxsfb)
>  
>  	reg = readl(mxsfb->base + LCDC_CTRL);
>  
> -	if (mxsfb->connector.display_info.num_bus_formats)
> -		bus_format = mxsfb->connector.display_info.bus_formats[0];
> +	if (mxsfb->connector->display_info.num_bus_formats)
> +		bus_format = mxsfb->connector->display_info.bus_formats[0];
> +
> +	DRM_DEV_DEBUG_DRIVER(drm->dev, "Using bus_format: 0x%08X\n",
> +			     bus_format);
>  
>  	reg &= ~CTRL_BUS_WIDTH_MASK;
>  	switch (bus_format) {
> @@ -204,8 +207,9 @@ static dma_addr_t mxsfb_get_fb_paddr(struct
> mxsfb_drm_private *mxsfb)
>  
>  static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
>  {
> +	struct drm_device *drm = mxsfb->pipe.crtc.dev;
>  	struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
> -	const u32 bus_flags = mxsfb->connector.display_info.bus_flags;
> +	const u32 bus_flags = mxsfb->connector->display_info.bus_flags;
>  	u32 vdctrl0, vsync_pulse_len, hsync_pulse_len;
>  	int err;
>  
> @@ -229,6 +233,13 @@ static void mxsfb_crtc_mode_set_nofb(struct
> mxsfb_drm_private *mxsfb)
>  
>  	clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
>  
> +	DRM_DEV_DEBUG_DRIVER(drm->dev, "Pixel clock: %dkHz (actual: %dkHz)\n",
> +			     m->crtc_clock,
> +			     (int)(clk_get_rate(mxsfb->clk) / 1000));
> +	DRM_DEV_DEBUG_DRIVER(drm->dev, "Connector bus_flags: 0x%08X\n",
> +			     bus_flags);
> +	DRM_DEV_DEBUG_DRIVER(drm->dev, "Mode flags: 0x%08X\n", m->flags);
> +
>  	writel(TRANSFER_COUNT_SET_VCOUNT(m->crtc_vdisplay) |
>  	       TRANSFER_COUNT_SET_HCOUNT(m->crtc_hdisplay),
>  	       mxsfb->base + mxsfb->devdata->transfer_count);
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> index e850633..497cf44 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> @@ -101,9 +101,25 @@ static void mxsfb_pipe_enable(struct
> drm_simple_display_pipe *pipe,
>  			      struct drm_crtc_state *crtc_state,
>  			      struct drm_plane_state *plane_state)
>  {
> +	struct drm_connector *connector;
>  	struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
>  	struct drm_device *drm = pipe->plane.dev;
>  
> +	if (!mxsfb->connector) {
> +		list_for_each_entry(connector,
> +				    &drm->mode_config.connector_list,
> +				    head)
> +			if (connector->encoder == &mxsfb->pipe.encoder) {
> +				mxsfb->connector = connector;
> +				break;
> +			}
> +	}
> +
> +	if (!mxsfb->connector) {
> +		dev_warn(drm->dev, "No connector attached, using default\n");
> +		mxsfb->connector = &mxsfb->panel_connector;
> +	}
> +
>  	pm_runtime_get_sync(drm->dev);
>  	drm_panel_prepare(mxsfb->panel);
>  	mxsfb_crtc_enable(mxsfb);
> @@ -129,6 +145,9 @@ static void mxsfb_pipe_disable(struct
> drm_simple_display_pipe *pipe)
>  		drm_crtc_send_vblank_event(crtc, event);
>  	}
>  	spin_unlock_irq(&drm->event_lock);
> +
> +	if (mxsfb->connector != &mxsfb->panel_connector)
> +		mxsfb->connector = NULL;
>  }
>  
>  static void mxsfb_pipe_update(struct drm_simple_display_pipe *pipe,
> @@ -226,16 +245,33 @@ static int mxsfb_load(struct drm_device *drm,
> unsigned long flags)
>  
>  	ret = drm_simple_display_pipe_init(drm, &mxsfb->pipe, &mxsfb_funcs,
>  			mxsfb_formats, ARRAY_SIZE(mxsfb_formats), NULL,
> -			&mxsfb->connector);
> +			mxsfb->connector);
>  	if (ret < 0) {
>  		dev_err(drm->dev, "Cannot setup simple display pipe\n");
>  		goto err_vblank;
>  	}
>  
> -	ret = drm_panel_attach(mxsfb->panel, &mxsfb->connector);
> -	if (ret) {
> -		dev_err(drm->dev, "Cannot connect panel\n");
> -		goto err_vblank;
> +	/*
> +	 * Attach panel only if there is one.
> +	 * If there is no panel attach, it must be a bridge. In this case, we
> +	 * need a reference to its connector for a proper initialization.
> +	 * We will do this check in pipe->enable(), since the connector won't
> +	 * be attached to an encoder until then.
> +	 */
> +
> +	if (mxsfb->panel) {
> +		ret = drm_panel_attach(mxsfb->panel, mxsfb->connector);
> +		if (ret) {
> +			dev_err(drm->dev, "Cannot connect panel: %d\n", ret);
> +			goto err_vblank;
> +		}
> +	} else if (mxsfb->bridge) {
> +		ret = drm_simple_display_pipe_attach_bridge(&mxsfb->pipe,
> +							    mxsfb->bridge);
> +		if (ret) {
> +			dev_err(drm->dev, "Cannot connect bridge: %d\n", ret);
> +			goto err_vblank;
> +		}
>  	}
>  
>  	drm->mode_config.min_width	= MXSFB_MIN_XRES;
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> index d975300..0b65b51 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> @@ -27,8 +27,10 @@ struct mxsfb_drm_private {
>  	struct clk			*clk_disp_axi;
>  
>  	struct drm_simple_display_pipe	pipe;
> -	struct drm_connector		connector;
> +	struct drm_connector		panel_connector;
> +	struct drm_connector		*connector;
>  	struct drm_panel		*panel;
> +	struct drm_bridge		*bridge;
>  };
>  
>  int mxsfb_setup_crtc(struct drm_device *dev);
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_out.c
> b/drivers/gpu/drm/mxsfb/mxsfb_out.c
> index be36f4d..4eb9474 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_out.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_out.c
> @@ -21,7 +21,8 @@
>  static struct mxsfb_drm_private *
>  drm_connector_to_mxsfb_drm_private(struct drm_connector *connector)
>  {
> -	return container_of(connector, struct mxsfb_drm_private, connector);
> +	return container_of(connector, struct mxsfb_drm_private,
> +			    panel_connector);
>  }
>  
>  static int mxsfb_panel_get_modes(struct drm_connector *connector)
> @@ -76,22 +77,23 @@ static const struct drm_connector_funcs
> mxsfb_panel_connector_funcs = {
>  int mxsfb_create_output(struct drm_device *drm)
>  {
>  	struct mxsfb_drm_private *mxsfb = drm->dev_private;
> -	struct drm_panel *panel;
>  	int ret;
>  
> -	ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0, &panel, NULL);
> +	ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0,
> +					  &mxsfb->panel, &mxsfb->bridge);
>  	if (ret)
>  		return ret;
>  
> -	mxsfb->connector.dpms = DRM_MODE_DPMS_OFF;
> -	mxsfb->connector.polled = 0;
> -	drm_connector_helper_add(&mxsfb->connector,
> -			&mxsfb_panel_connector_helper_funcs);
> -	ret = drm_connector_init(drm, &mxsfb->connector,
> -				 &mxsfb_panel_connector_funcs,
> -				 DRM_MODE_CONNECTOR_Unknown);
> -	if (!ret)
> -		mxsfb->panel = panel;
> +	if (mxsfb->panel) {
> +		mxsfb->connector = &mxsfb->panel_connector;
> +		mxsfb->connector->dpms = DRM_MODE_DPMS_OFF;
> +		mxsfb->connector->polled = 0;
> +		drm_connector_helper_add(mxsfb->connector,
> +					 &mxsfb_panel_connector_helper_funcs);
> +		ret = drm_connector_init(drm, mxsfb->connector,
> +					 &mxsfb_panel_connector_funcs,
> +					 DRM_MODE_CONNECTOR_Unknown);
> +	}
>  
>  	return ret;
>  }

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
index 1242156..de09b93 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
@@ -95,8 +95,11 @@  static void mxsfb_set_bus_fmt(struct mxsfb_drm_private *mxsfb)
 
 	reg = readl(mxsfb->base + LCDC_CTRL);
 
-	if (mxsfb->connector.display_info.num_bus_formats)
-		bus_format = mxsfb->connector.display_info.bus_formats[0];
+	if (mxsfb->connector->display_info.num_bus_formats)
+		bus_format = mxsfb->connector->display_info.bus_formats[0];
+
+	DRM_DEV_DEBUG_DRIVER(drm->dev, "Using bus_format: 0x%08X\n",
+			     bus_format);
 
 	reg &= ~CTRL_BUS_WIDTH_MASK;
 	switch (bus_format) {
@@ -204,8 +207,9 @@  static dma_addr_t mxsfb_get_fb_paddr(struct mxsfb_drm_private *mxsfb)
 
 static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
 {
+	struct drm_device *drm = mxsfb->pipe.crtc.dev;
 	struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
-	const u32 bus_flags = mxsfb->connector.display_info.bus_flags;
+	const u32 bus_flags = mxsfb->connector->display_info.bus_flags;
 	u32 vdctrl0, vsync_pulse_len, hsync_pulse_len;
 	int err;
 
@@ -229,6 +233,13 @@  static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
 
 	clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
 
+	DRM_DEV_DEBUG_DRIVER(drm->dev, "Pixel clock: %dkHz (actual: %dkHz)\n",
+			     m->crtc_clock,
+			     (int)(clk_get_rate(mxsfb->clk) / 1000));
+	DRM_DEV_DEBUG_DRIVER(drm->dev, "Connector bus_flags: 0x%08X\n",
+			     bus_flags);
+	DRM_DEV_DEBUG_DRIVER(drm->dev, "Mode flags: 0x%08X\n", m->flags);
+
 	writel(TRANSFER_COUNT_SET_VCOUNT(m->crtc_vdisplay) |
 	       TRANSFER_COUNT_SET_HCOUNT(m->crtc_hdisplay),
 	       mxsfb->base + mxsfb->devdata->transfer_count);
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
index e850633..497cf44 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
@@ -101,9 +101,25 @@  static void mxsfb_pipe_enable(struct drm_simple_display_pipe *pipe,
 			      struct drm_crtc_state *crtc_state,
 			      struct drm_plane_state *plane_state)
 {
+	struct drm_connector *connector;
 	struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
 	struct drm_device *drm = pipe->plane.dev;
 
+	if (!mxsfb->connector) {
+		list_for_each_entry(connector,
+				    &drm->mode_config.connector_list,
+				    head)
+			if (connector->encoder == &mxsfb->pipe.encoder) {
+				mxsfb->connector = connector;
+				break;
+			}
+	}
+
+	if (!mxsfb->connector) {
+		dev_warn(drm->dev, "No connector attached, using default\n");
+		mxsfb->connector = &mxsfb->panel_connector;
+	}
+
 	pm_runtime_get_sync(drm->dev);
 	drm_panel_prepare(mxsfb->panel);
 	mxsfb_crtc_enable(mxsfb);
@@ -129,6 +145,9 @@  static void mxsfb_pipe_disable(struct drm_simple_display_pipe *pipe)
 		drm_crtc_send_vblank_event(crtc, event);
 	}
 	spin_unlock_irq(&drm->event_lock);
+
+	if (mxsfb->connector != &mxsfb->panel_connector)
+		mxsfb->connector = NULL;
 }
 
 static void mxsfb_pipe_update(struct drm_simple_display_pipe *pipe,
@@ -226,16 +245,33 @@  static int mxsfb_load(struct drm_device *drm, unsigned long flags)
 
 	ret = drm_simple_display_pipe_init(drm, &mxsfb->pipe, &mxsfb_funcs,
 			mxsfb_formats, ARRAY_SIZE(mxsfb_formats), NULL,
-			&mxsfb->connector);
+			mxsfb->connector);
 	if (ret < 0) {
 		dev_err(drm->dev, "Cannot setup simple display pipe\n");
 		goto err_vblank;
 	}
 
-	ret = drm_panel_attach(mxsfb->panel, &mxsfb->connector);
-	if (ret) {
-		dev_err(drm->dev, "Cannot connect panel\n");
-		goto err_vblank;
+	/*
+	 * Attach panel only if there is one.
+	 * If there is no panel attach, it must be a bridge. In this case, we
+	 * need a reference to its connector for a proper initialization.
+	 * We will do this check in pipe->enable(), since the connector won't
+	 * be attached to an encoder until then.
+	 */
+
+	if (mxsfb->panel) {
+		ret = drm_panel_attach(mxsfb->panel, mxsfb->connector);
+		if (ret) {
+			dev_err(drm->dev, "Cannot connect panel: %d\n", ret);
+			goto err_vblank;
+		}
+	} else if (mxsfb->bridge) {
+		ret = drm_simple_display_pipe_attach_bridge(&mxsfb->pipe,
+							    mxsfb->bridge);
+		if (ret) {
+			dev_err(drm->dev, "Cannot connect bridge: %d\n", ret);
+			goto err_vblank;
+		}
 	}
 
 	drm->mode_config.min_width	= MXSFB_MIN_XRES;
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
index d975300..0b65b51 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
@@ -27,8 +27,10 @@  struct mxsfb_drm_private {
 	struct clk			*clk_disp_axi;
 
 	struct drm_simple_display_pipe	pipe;
-	struct drm_connector		connector;
+	struct drm_connector		panel_connector;
+	struct drm_connector		*connector;
 	struct drm_panel		*panel;
+	struct drm_bridge		*bridge;
 };
 
 int mxsfb_setup_crtc(struct drm_device *dev);
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_out.c b/drivers/gpu/drm/mxsfb/mxsfb_out.c
index be36f4d..4eb9474 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_out.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_out.c
@@ -21,7 +21,8 @@ 
 static struct mxsfb_drm_private *
 drm_connector_to_mxsfb_drm_private(struct drm_connector *connector)
 {
-	return container_of(connector, struct mxsfb_drm_private, connector);
+	return container_of(connector, struct mxsfb_drm_private,
+			    panel_connector);
 }
 
 static int mxsfb_panel_get_modes(struct drm_connector *connector)
@@ -76,22 +77,23 @@  static const struct drm_connector_funcs mxsfb_panel_connector_funcs = {
 int mxsfb_create_output(struct drm_device *drm)
 {
 	struct mxsfb_drm_private *mxsfb = drm->dev_private;
-	struct drm_panel *panel;
 	int ret;
 
-	ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0, &panel, NULL);
+	ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0,
+					  &mxsfb->panel, &mxsfb->bridge);
 	if (ret)
 		return ret;
 
-	mxsfb->connector.dpms = DRM_MODE_DPMS_OFF;
-	mxsfb->connector.polled = 0;
-	drm_connector_helper_add(&mxsfb->connector,
-			&mxsfb_panel_connector_helper_funcs);
-	ret = drm_connector_init(drm, &mxsfb->connector,
-				 &mxsfb_panel_connector_funcs,
-				 DRM_MODE_CONNECTOR_Unknown);
-	if (!ret)
-		mxsfb->panel = panel;
+	if (mxsfb->panel) {
+		mxsfb->connector = &mxsfb->panel_connector;
+		mxsfb->connector->dpms = DRM_MODE_DPMS_OFF;
+		mxsfb->connector->polled = 0;
+		drm_connector_helper_add(mxsfb->connector,
+					 &mxsfb_panel_connector_helper_funcs);
+		ret = drm_connector_init(drm, mxsfb->connector,
+					 &mxsfb_panel_connector_funcs,
+					 DRM_MODE_CONNECTOR_Unknown);
+	}
 
 	return ret;
 }

[v4,01/14] drm/mxsfb: Update mxsfb to support a bridge

Commit Message

Comments

Patch