Show patches with: Submitter = Stefan Agner       |    State = Action Required       |    Archived = No       |   138 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,8/8] ARM: dts: imx6qdl-apalis: add GPIO I2C node for DDC drm/bridge: add bus flag support - - - 0 0 0 2018-09-12 Stefan Agner New
[v2,7/8] ARM: dts: imx6qdl-apalis: add VGA support drm/bridge: add bus flag support - - - 0 0 0 2018-09-12 Stefan Agner New
[v2,6/8] drm/imx: support handling bridge timings bus flags drm/bridge: add bus flag support - - - 0 0 0 2018-09-12 Stefan Agner New
[v2,5/8] dt-bindings: display: add data-enable polarity property drm/bridge: add bus flag support - - - 0 0 0 2018-09-12 Stefan Agner New
[v2,4/8] drm/bridge: allow to specify data-enable polarity drm/bridge: add bus flag support - - - 0 0 0 2018-09-12 Stefan Agner New
[v2,3/8] drm/bridge: simplify bridge timing info drm/bridge: add bus flag support - - - 0 0 0 2018-09-12 Stefan Agner New
[v2,2/8] drm/pl111: simplify bridge timing support drm/bridge: add bus flag support - - - 0 0 0 2018-09-12 Stefan Agner New
[v2,1/8] drm/bridge: use bus flags in bridge timings drm/bridge: add bus flag support - - - 0 0 0 2018-09-12 Stefan Agner New
[3/6] dt-bindings: display: add data-enable polarity property [1/6] drm/bridge: use bus flags in bridge timings - - - 0 0 0 2018-09-05 Stefan Agner New
[libdrm,2/2] modeprint: print encoder type Untitled series #15499 - - - 0 0 0 2018-09-05 Stefan Agner New
[2/6] drm/bridge: allow to specify data-enable polarity [1/6] drm/bridge: use bus flags in bridge timings - - - 0 0 0 2018-09-05 Stefan Agner New
[libdrm,1/2] modeprint: use libutil to lookup strings [libdrm,1/2] modeprint: use libutil to lookup strings - - - 0 0 0 2018-09-05 Stefan Agner New
[1/6] drm/bridge: use bus flags in bridge timings [1/6] drm/bridge: use bus flags in bridge timings - - - 0 0 0 2018-09-05 Stefan Agner New
[6/6] ARM: dts: imx6qdl-apalis: add GPIO I2C node for DDC [1/6] drm/bridge: use bus flags in bridge timings - - - 0 0 0 2018-09-05 Stefan Agner New
[5/6] ARM: dts: imx6qdl-apalis: add VGA support [1/6] drm/bridge: use bus flags in bridge timings - - - 0 0 0 2018-09-05 Stefan Agner New
[4/6] drm/imx: support handling bridge timings bus flags [1/6] drm/bridge: use bus flags in bridge timings - - - 0 0 0 2018-09-05 Stefan Agner New
[3/6] dt-bindings: display: add data-enable polarity property [1/6] drm/bridge: use bus flags in bridge timings - - - 0 0 0 2018-09-05 Stefan Agner New
[2/6] drm/bridge: allow to specify data-enable polarity [1/6] drm/bridge: use bus flags in bridge timings - - - 0 0 0 2018-09-05 Stefan Agner New
[1/6] drm/bridge: use bus flags in bridge timings [1/6] drm/bridge: use bus flags in bridge timings - - - 0 0 0 2018-09-05 Stefan Agner New
drm/doc: clarify how to acquire required vblank event reference drm/doc: clarify how to acquire required vblank event reference - - - 0 0 0 2018-08-07 Stefan Agner New
drm/tegra: return with probe defer if GPIO subsystem is not ready drm/tegra: return with probe defer if GPIO subsystem is not ready - - - 0 0 0 2018-07-26 Stefan Agner New
drm/exynos: ipp: use correct enum type - - - 0 0 0 2018-06-17 Stefan Agner New
drm/amd/display: don't initialize result - 1 - 0 0 0 2018-06-17 Stefan Agner New
drm/amdgpu: use first uvd instance to avoid clang build error - - - 0 0 0 2018-06-17 Stefan Agner New
[v2] drm/atmel-hlcdc: check stride values in the first plane - - - 0 0 0 2018-06-17 Stefan Agner New
drm/mxsfb: rename driver to mxsfb-drm - 1 - 0 0 0 2018-06-12 Stefan Agner New
drm/panel: simple: fix data type in KEO TX31D200VM0BAA timings - - - 0 0 0 2018-04-19 Stefan Agner New
drm/msm/dsi: use correct enum in dsi_get_cmd_fmt - 1 - 0 0 0 2018-03-19 Stefan Agner New
drm/tegra: dc: use correct format array for Tegra124. - - - 0 0 0 2018-03-19 Stefan Agner New
[v2,2/2] drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume() 1 - - 0 0 0 2017-11-14 Stefan Agner New
[v2,1/2] drm/fsl-dcu: avoid disabling pixel clock twice on suspend 1 - - 0 0 0 2017-11-14 Stefan Agner New
[v2] drm/fsl-dcu: Don't set connector DPMS property - - - 0 0 0 2017-11-10 Stefan Agner New
[2/2] drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume() 1 - - 0 0 0 2017-11-10 Stefan Agner New
[1/2] drm/fsl-dcu: avoid disabling pixel clock twice on suspend 1 - - 0 0 0 2017-11-10 Stefan Agner New
drm/fsl-dcu: set DPMS off before initializing connector - - - 0 0 0 2017-11-09 Stefan Agner New
drm/atmel-hlcdc: remove unnecessary if statement - - - 0 0 0 2017-08-07 Stefan Agner New
[2/2] drm/fsl-dcu: use new drm_atomic_helper_shutdown - - - 0 0 0 2017-06-02 Stefan Agner New
[1/2] drm/fsl-dcu: implement irq_preinstall/uninstall callbacks - - - 0 0 0 2017-06-02 Stefan Agner New
[v3] drm/mxsfb: use bus_format to determine LCD bus width 1 - - 0 0 0 2016-12-15 Stefan Agner New
[v2] drm/mxsfb: fix pixel clock polarity 1 - - 0 0 0 2016-12-14 Stefan Agner New
[v2] drm/mxsfb: use bus_format to determine LCD bus width - - - 0 0 0 2016-12-14 Stefan Agner New
drm/panel: simple: specify bus width and flags for EDT displays - - - 0 0 0 2016-12-08 Stefan Agner New
drm/mxsfb: use bus_format to determine LCD bus width - - 1 0 0 0 2016-12-08 Stefan Agner New
drm/mxsfb: fix pixel clock polarity - - - 0 0 0 2016-12-08 Stefan Agner New
[2/2] drm/fsl-dcu: introduce kernel parameter to specify fbdev depth - - - 0 0 0 2016-11-17 Stefan Agner New
[1/2] drm/fsl-dcu: remove separate compilation unit for fbdev emulation - - - 0 0 0 2016-11-17 Stefan Agner New
drm/atomic-helper: fix reference to drm_atomic_helper_commit_planes - - - 0 0 0 2016-10-31 Stefan Agner New
drm/fsl-dcu: disable planes before disabling CRTC - - - 0 0 0 2016-10-31 Stefan Agner New
[3/3] drm/fsl-dcu: disable outputs before unloading driver - - - 0 0 0 2016-10-20 Stefan Agner New
[2/3] drm/fsl-dcu: unload driver before disabling clocks - - - 0 0 0 2016-10-20 Stefan Agner New
[1/3] drm/fb_cma_helper: do not free fbdev if there is none - - - 0 0 0 2016-10-20 Stefan Agner New
[v3,5/5] drm/fsl-dcu: only init fbdev if required - - - 0 0 0 2016-10-18 Stefan Agner New
[v3,5/5] drm/fsl-dcu: only init fbdev if required - - - 0 0 0 2016-10-17 Stefan Agner New
[v3,4/5] drm/fsl-dcu: enable pixel clock when enabling CRTC - - - 0 0 0 2016-10-17 Stefan Agner New
[v3,3/5] drm/fsl-dcu: do not transfer registers in mode_set_nofb - - - 0 0 0 2016-10-17 Stefan Agner New
[v3,2/5] drm/fsl-dcu: do not transfer registers on plane init - - - 0 0 0 2016-10-17 Stefan Agner New
[v3,1/5] drm/fsl-dcu: enable TCON bypass mode by default - - 1 0 0 0 2016-10-17 Stefan Agner New
[RFC] drm/fb-helper: reject any changes to the fbdev - 1 - 0 0 0 2016-10-11 Stefan Agner New
[v2,5/5] drm/fsl-dcu: only init fbdev if required - - - 0 0 0 2016-10-05 Stefan Agner New
[v2,4/5] drm/fsl-dcu: enable pixel clock when enabling CRTC - - - 0 0 0 2016-10-05 Stefan Agner New
[v2,3/5] drm/fsl-dcu: do not transfer registers in mode_set_nofb - - - 0 0 0 2016-10-05 Stefan Agner New
[v2,3/5] drm/fsl-dcu: do not transfer register in mode_set_nofb - - - 0 0 0 2016-10-05 Stefan Agner New
[v2,2/5] drm/fsl-dcu: do not transfer registers on plane init - - - 0 0 0 2016-10-05 Stefan Agner New
[v2,2/5] drm/fsl-dcu: do not explicitly transfer registers on plane init - - - 0 0 0 2016-10-05 Stefan Agner New
[v2,1/5] drm/fsl-dcu: enable TCON bypass mode by default - - - 0 0 0 2016-10-05 Stefan Agner New
[3/3] drm/fsl-dcu: enable pixel clock when enabling CRTC - - - 0 0 0 2016-10-05 Stefan Agner New
[2/3] drm/fsl-dcu: do not explicitly transfer registers on plane init - - - 0 0 0 2016-10-05 Stefan Agner New
[1/3] drm/fsl-dcu: enable TCON bypass mode by default - - - 0 0 0 2016-10-05 Stefan Agner New
[v3] drm/fsl-dcu: Implement gamma_lut atomic crtc properties - - - 0 0 0 2016-09-07 Stefan Agner New
[4/4] drm/fsl-dcu: do not update when modifying irq registers - - - 0 0 0 2016-09-06 Stefan Agner New
[3/4] drm/fsl-dcu: update all registers on flush - - - 0 0 0 2016-09-06 Stefan Agner New
[2/4] drm/fsl-dcu: respect pos/size register sizes - - - 0 0 0 2016-09-06 Stefan Agner New
[1/4] drm/fsl-dcu: support overlay and cursor planes - - - 0 0 0 2016-09-06 Stefan Agner New
drm/fsl-dcu: fix endian issue when using clk_register_divider - - 1 0 0 0 2016-09-02 Stefan Agner New
drm/fsl-dcu: use drm_mode_config_cleanup on initialization errors - - - 0 0 0 2016-06-19 Stefan Agner New
[v2,6/6] drm/fsl-dcu: disable vblank events on CRTC disable - - - 0 0 0 2016-06-03 Stefan Agner New
[v2,5/6] drm/fsl-dcu: implement suspend/resume using atomic helpers - - - 0 0 0 2016-06-03 Stefan Agner New
[v2,4/6] drm/fsl-dcu: use clk helpers - - - 0 0 0 2016-06-03 Stefan Agner New
[v2,3/6] drm/fsl-dcu: move layer initialization to plane file - - - 0 0 0 2016-06-03 Stefan Agner New
[v2,2/6] drm/fsl-dcu: store layer registers in soc_data - - - 0 0 0 2016-06-03 Stefan Agner New
[v2,1/6] drm/fb_cma_helper: add suspend helper 1 - - 0 0 0 2016-06-03 Stefan Agner New
drm/fsl-dcu: use flat regmap cache - - - 0 0 0 2016-06-03 Stefan Agner New
[RESEND,v3,2/2] drm/fsl-dcu: use bus_flags for pixel clock polarity - - - 0 0 0 2016-05-05 Stefan Agner New
[RESEND,v3,1/2] drm: introduce bus_flags in drm_display_info - - - 0 0 0 2016-05-05 Stefan Agner New
[6/6] drm/fsl-dcu: disable vblank events on CRTC disable - - - 0 0 0 2016-04-19 Stefan Agner New
[5/6] drm/fsl-dcu: implement suspend/resume using atomic helpers - - - 0 0 0 2016-04-19 Stefan Agner New
[4/6] drm/fsl-dcu: use clk helpers - - - 0 0 0 2016-04-19 Stefan Agner New
[3/6] drm/fsl-dcu: move layer initialization to plane file - - - 0 0 0 2016-04-19 Stefan Agner New
[2/6] drm/fsl-dcu: store layer registers in soc_data - - - 0 0 0 2016-04-19 Stefan Agner New
[1/6] drm/fb_cma_helper: add suspend helper - - - 0 0 0 2016-04-19 Stefan Agner New
[v3,2/2] drm/fsl-dcu: use bus_flags for pixel clock polarity - - - 0 0 0 2016-04-18 Stefan Agner New
[v3,1/2] drm: introduce bus_flags in drm_display_info - - - 0 0 0 2016-04-18 Stefan Agner New
[6/6] drm/fsl-dcu: implement lastclose callback - - - 0 0 0 2016-04-17 Stefan Agner New
[5/6] drm/fsl-dcu: disable output polling on driver unload - - - 0 0 0 2016-04-17 Stefan Agner New
[4/6] drm/fsl-dcu: deallocate fbdev CMA on unload - - - 0 0 0 2016-04-17 Stefan Agner New
[3/6] drm/fsl-dcu: use variable name dev for struct drm_device - - - 0 0 0 2016-04-17 Stefan Agner New
[2/6] drm/fsl-dcu: handle missing panel gracefully - - - 0 0 0 2016-04-17 Stefan Agner New
[1/6] drm/fsl-dcu: detach panel on destroy - - - 0 0 0 2016-04-17 Stefan Agner New
[v3,9/9] ARM: dts: ls1021a: add pix clock to DCU dts node - - - 0 0 0 2016-04-05 Stefan Agner New
[v3,8/9] ARM: dts: vf610-colibri: enable display controller - - - 0 0 0 2016-04-05 Stefan Agner New
« 1 2 »