Message ID | 20191015104621.62514-4-jacopo+renesas@jmondi.org (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Kieran Bingham |
Headers | show |
Series | drm: rcar-du: Add Color Management Module (CMM) | expand |
Hi Jacopo, On 15/10/2019 11:46, Jacopo Mondi wrote: > Add a driver for the R-Car Display Unit Color Correction Module. > > In most of Gen3 SoCs, each DU output channel is provided with a CMM unit > to perform image enhancement and color correction. > > Add support for CMM through a driver that supports configuration of > the 1-dimensional LUT table. More advanced CMM features will be > implemented on top of this initial one. > This is looking good to me. I have patches which start to add CLU on top of this, which refactor things slightly - but I don't think that refactoring needs to be in this series, and this version is independent and looks good ... thus: Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > --- > drivers/gpu/drm/rcar-du/Kconfig | 7 + > drivers/gpu/drm/rcar-du/Makefile | 1 + > drivers/gpu/drm/rcar-du/rcar_cmm.c | 198 +++++++++++++++++++++++++++++ > drivers/gpu/drm/rcar-du/rcar_cmm.h | 60 +++++++++ > 4 files changed, 266 insertions(+) > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.c > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.h > > diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig > index 1529849e217e..539d232790d1 100644 > --- a/drivers/gpu/drm/rcar-du/Kconfig > +++ b/drivers/gpu/drm/rcar-du/Kconfig > @@ -13,6 +13,13 @@ config DRM_RCAR_DU > Choose this option if you have an R-Car chipset. > If M is selected the module will be called rcar-du-drm. > > +config DRM_RCAR_CMM > + bool "R-Car DU Color Management Module (CMM) Support" > + depends on DRM && OF > + depends on DRM_RCAR_DU DRM_RCAR_DU already depends on both DRM && OF, so I wonder if those are needed to be specified explicitly. Doesn't hurt of course, but I see DRM_RCAR_DW_HDMI does the same, and so does DRM_RCAR_LVDS, so I don't think you need to remove it. > + help > + Enable support for R-Car Color Management Module (CMM). > + > config DRM_RCAR_DW_HDMI > tristate "R-Car DU Gen3 HDMI Encoder Support" > depends on DRM && OF > diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile > index 6c2ed9c46467..4d1187ccc3e5 100644 > --- a/drivers/gpu/drm/rcar-du/Makefile > +++ b/drivers/gpu/drm/rcar-du/Makefile > @@ -15,6 +15,7 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS) += rcar_du_of.o \ > rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o > rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o > > +obj-$(CONFIG_DRM_RCAR_CMM) += rcar_cmm.o > obj-$(CONFIG_DRM_RCAR_DU) += rcar-du-drm.o > obj-$(CONFIG_DRM_RCAR_DW_HDMI) += rcar_dw_hdmi.o > obj-$(CONFIG_DRM_RCAR_LVDS) += rcar_lvds.o > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c b/drivers/gpu/drm/rcar-du/rcar_cmm.c > new file mode 100644 > index 000000000000..9675a8587dee > --- /dev/null > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.c > @@ -0,0 +1,198 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * rcar_cmm.c -- R-Car Display Unit Color Management Module > + * > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org> > + */ > + > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > + > +#include <drm/drm_color_mgmt.h> > + > +#include "rcar_cmm.h" > + > +#define CM2_LUT_CTRL 0x0000 > +#define CM2_LUT_CTRL_LUT_EN BIT(0) > +#define CM2_LUT_TBL_BASE 0x0600 > +#define CM2_LUT_TBL(__i) (CM2_LUT_TBL_BASE + (__i) * 4) > + > +struct rcar_cmm { > + void __iomem *base; > + > + /* > + * @lut: 1D-LUT status > + * @lut.enabled: 1D-LUT enabled flag > + */ > + struct { > + bool enabled; > + } lut; This used to be a more complex structure in an earlier version storing a cached version of the table. Now that the cached entry is removed, does this need to be such a complex structure rather than just say, a bool lut_enabled? (We will soon add an equivalent clu_enabled too, but I don't know what other per-table options we'll need.) In fact, we'll potentially have other options specific to the HGO, and CSC at some point in the future - so grouping by entity is indeed a good thing IMO. > +}; > + > +static inline int rcar_cmm_read(struct rcar_cmm *rcmm, u32 reg) > +{ > + return ioread32(rcmm->base + reg); > +} > + > +static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32 data) > +{ > + iowrite32(data, rcmm->base + reg); > +} > + > +/* > + * rcar_cmm_lut_write() - Scale the DRM LUT table entries to hardware precision > + * and write to the CMM registers. > + * @rcmm: Pointer to the CMM device > + * @drm_lut: Pointer to the DRM LUT table > + */ > +static void rcar_cmm_lut_write(struct rcar_cmm *rcmm, > + const struct drm_color_lut *drm_lut) > +{ > + unsigned int i; > + > + for (i = 0; i < CM2_LUT_SIZE; ++i) { > + u32 entry = drm_color_lut_extract(drm_lut[i].red, 8) << 16 > + | drm_color_lut_extract(drm_lut[i].green, 8) << 8 > + | drm_color_lut_extract(drm_lut[i].blue, 8); > + > + rcar_cmm_write(rcmm, CM2_LUT_TBL(i), entry); > + } > +} > + > +/* > + * rcar_cmm_setup() - Configure the CMM unit. > + * @pdev: The platform device associated with the CMM instance > + * @config: The CMM unit configuration > + * > + * Configure the CMM unit with the given configuration. Currently enabling, > + * disabling and programming of the 1-D LUT unit is supported. > + */ > +int rcar_cmm_setup(struct platform_device *pdev, > + const struct rcar_cmm_config *config) > +{ > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > + > + /* Disable LUT if requested. */ > + if (!config->lut.enable) { > + if (rcmm->lut.enabled) { > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); > + rcmm->lut.enabled = false; > + } > + > + return 0; > + } > + > + /* Enable LUT and program the new gamma table values. */ > + if (!rcmm->lut.enabled) { > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN); > + rcmm->lut.enabled = true; > + } > + > + rcar_cmm_lut_write(rcmm, config->lut.table); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(rcar_cmm_setup); > + > +/* > + * rcar_cmm_enable() - Enable the CMM unit. > + * @pdev: The platform device associated with the CMM instance > + * > + * Enable the CMM unit by enabling the parent clock. > + */ > +int rcar_cmm_enable(struct platform_device *pdev) > +{ > + int ret; > + > + ret = pm_runtime_get_sync(&pdev->dev); > + if (ret < 0) > + return ret; > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(rcar_cmm_enable); > + > +/* > + * rcar_cmm_disable() - Disable the CMM unit. > + * @pdev: The platform device associated with the CMM instance > + * > + * Disable the CMM unit by stopping the parent clock. > + */ > +void rcar_cmm_disable(struct platform_device *pdev) > +{ > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > + > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); > + rcmm->lut.enabled = false; > + > + pm_runtime_put(&pdev->dev); > +} > +EXPORT_SYMBOL_GPL(rcar_cmm_disable); > + > +/* > + * rcar_cmm_init() - Initialize the CMM > + * @pdev: The platform device associated with the CMM instance > + * > + * Return: 0 on success, -EPROBE_DEFER if the CMM is not available yet, > + * -ENODEV if the DRM_RCAR_CMM config option is disabled > + */ > +int rcar_cmm_init(struct platform_device *pdev) > +{ > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > + > + if (!rcmm) > + return -EPROBE_DEFER; > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(rcar_cmm_init); > + > +static int rcar_cmm_probe(struct platform_device *pdev) > +{ > + struct rcar_cmm *rcmm; > + > + rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL); > + if (!rcmm) > + return -ENOMEM; > + platform_set_drvdata(pdev, rcmm); > + > + rcmm->base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(rcmm->base)) > + return PTR_ERR(rcmm->base); > + > + pm_runtime_enable(&pdev->dev); > + > + return 0; > +} > + > +static int rcar_cmm_remove(struct platform_device *pdev) > +{ > + pm_runtime_disable(&pdev->dev); > + > + return 0; > +} > + > +static const struct of_device_id rcar_cmm_of_table[] = { > + { .compatible = "renesas,rcar-gen3-cmm", }, > + { .compatible = "renesas,rcar-gen2-cmm", }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, rcar_cmm_of_table); > + > +static struct platform_driver rcar_cmm_platform_driver = { > + .probe = rcar_cmm_probe, > + .remove = rcar_cmm_remove, > + .driver = { > + .name = "rcar-cmm", > + .of_match_table = rcar_cmm_of_table, > + }, > +}; > + > +module_platform_driver(rcar_cmm_platform_driver); > + > +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org>"); > +MODULE_DESCRIPTION("Renesas R-Car CMM Driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h b/drivers/gpu/drm/rcar-du/rcar_cmm.h > new file mode 100644 > index 000000000000..358ec03cf48a > --- /dev/null > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.h > @@ -0,0 +1,60 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * rcar_cmm.h -- R-Car Display Unit Color Management Module > + * > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org> > + */ > + > +#ifndef __RCAR_CMM_H__ > +#define __RCAR_CMM_H__ > + > +#define CM2_LUT_SIZE 256 > + > +struct drm_color_lut; > +struct platform_device; > + > +/** > + * struct rcar_cmm_config - CMM configuration > + * > + * @lut: 1D-LUT configuration > + * @lut.enable: 1D-LUT enable flag > + * @lut.table: 1D-LUT table entries > + */ > +struct rcar_cmm_config { > + struct { > + bool enable; > + struct drm_color_lut *table; > + } lut; > +}; > + > +#if IS_ENABLED(CONFIG_DRM_RCAR_CMM) > +int rcar_cmm_init(struct platform_device *pdev); > + > +int rcar_cmm_enable(struct platform_device *pdev); > +void rcar_cmm_disable(struct platform_device *pdev); > + > +int rcar_cmm_setup(struct platform_device *pdev, > + const struct rcar_cmm_config *config); > +#else > +static inline int rcar_cmm_init(struct platform_device *pdev) > +{ > + return -ENODEV; Excellent :-D > +} > + > +static inline int rcar_cmm_enable(struct platform_device *pdev) > +{ > + return 0; > +} > + > +static inline void rcar_cmm_disable(struct platform_device *pdev) > +{ > +} > + > +static inline int rcar_cmm_setup(struct platform_device *pdev, > + const struct rcar_cmm_config *config) > +{ > + return 0; > +} > +#endif /* IS_ENABLED(CONFIG_DRM_RCAR_CMM) */ > + > +#endif /* __RCAR_CMM_H__ */ >
Hi Jacopo, One minor additional catch here: On 15/10/2019 12:53, Kieran Bingham wrote: > Hi Jacopo, <snipped> >> + >> +/* >> + * rcar_cmm_lut_write() - Scale the DRM LUT table entries to hardware precision >> + * and write to the CMM registers. >> + * @rcmm: Pointer to the CMM device >> + * @drm_lut: Pointer to the DRM LUT table >> + */ >> +static void rcar_cmm_lut_write(struct rcar_cmm *rcmm, >> + const struct drm_color_lut *drm_lut) >> +{ >> + unsigned int i; >> + >> + for (i = 0; i < CM2_LUT_SIZE; ++i) { >> + u32 entry = drm_color_lut_extract(drm_lut[i].red, 8) << 16 There's an extra space between = and 'drm_color...' here. <snipped> -- Kieran
Hi Kieran, thanks for review On Tue, Oct 15, 2019 at 12:53:55PM +0100, Kieran Bingham wrote: > Hi Jacopo, > > On 15/10/2019 11:46, Jacopo Mondi wrote: > > Add a driver for the R-Car Display Unit Color Correction Module. > > > > In most of Gen3 SoCs, each DU output channel is provided with a CMM unit > > to perform image enhancement and color correction. > > > > Add support for CMM through a driver that supports configuration of > > the 1-dimensional LUT table. More advanced CMM features will be > > implemented on top of this initial one. > > > > This is looking good to me. > > I have patches which start to add CLU on top of this, which refactor > things slightly - but I don't think that refactoring needs to be in this > series, and this version is independent and looks good ... thus: > > Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > > > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > > --- > > drivers/gpu/drm/rcar-du/Kconfig | 7 + > > drivers/gpu/drm/rcar-du/Makefile | 1 + > > drivers/gpu/drm/rcar-du/rcar_cmm.c | 198 +++++++++++++++++++++++++++++ > > drivers/gpu/drm/rcar-du/rcar_cmm.h | 60 +++++++++ > > 4 files changed, 266 insertions(+) > > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.c > > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.h > > > > diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig > > index 1529849e217e..539d232790d1 100644 > > --- a/drivers/gpu/drm/rcar-du/Kconfig > > +++ b/drivers/gpu/drm/rcar-du/Kconfig > > @@ -13,6 +13,13 @@ config DRM_RCAR_DU > > Choose this option if you have an R-Car chipset. > > If M is selected the module will be called rcar-du-drm. > > > > +config DRM_RCAR_CMM > > + bool "R-Car DU Color Management Module (CMM) Support" > > + depends on DRM && OF > > + depends on DRM_RCAR_DU > > > DRM_RCAR_DU already depends on both DRM && OF, so I wonder if those are > needed to be specified explicitly. > > Doesn't hurt of course, but I see DRM_RCAR_DW_HDMI does the same, and so > does DRM_RCAR_LVDS, so I don't think you need to remove it. > I did the same as it is done for HDMI and LVDS here. The extra dependencies could be dropped yes, I chose to be consistent. > > + help > > + Enable support for R-Car Color Management Module (CMM). > > + > > config DRM_RCAR_DW_HDMI > > tristate "R-Car DU Gen3 HDMI Encoder Support" > > depends on DRM && OF > > diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile > > index 6c2ed9c46467..4d1187ccc3e5 100644 > > --- a/drivers/gpu/drm/rcar-du/Makefile > > +++ b/drivers/gpu/drm/rcar-du/Makefile > > @@ -15,6 +15,7 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS) += rcar_du_of.o \ > > rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o > > rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o > > > > +obj-$(CONFIG_DRM_RCAR_CMM) += rcar_cmm.o > > obj-$(CONFIG_DRM_RCAR_DU) += rcar-du-drm.o > > obj-$(CONFIG_DRM_RCAR_DW_HDMI) += rcar_dw_hdmi.o > > obj-$(CONFIG_DRM_RCAR_LVDS) += rcar_lvds.o > > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c b/drivers/gpu/drm/rcar-du/rcar_cmm.c > > new file mode 100644 > > index 000000000000..9675a8587dee > > --- /dev/null > > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.c > > @@ -0,0 +1,198 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * rcar_cmm.c -- R-Car Display Unit Color Management Module > > + * > > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org> > > + */ > > + > > +#include <linux/io.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/platform_device.h> > > +#include <linux/pm_runtime.h> > > + > > +#include <drm/drm_color_mgmt.h> > > + > > +#include "rcar_cmm.h" > > + > > +#define CM2_LUT_CTRL 0x0000 > > +#define CM2_LUT_CTRL_LUT_EN BIT(0) > > +#define CM2_LUT_TBL_BASE 0x0600 > > +#define CM2_LUT_TBL(__i) (CM2_LUT_TBL_BASE + (__i) * 4) > > + > > +struct rcar_cmm { > > + void __iomem *base; > > + > > + /* > > + * @lut: 1D-LUT status > > + * @lut.enabled: 1D-LUT enabled flag > > + */ > > + struct { > > + bool enabled; > > + } lut; > > This used to be a more complex structure in an earlier version storing a > cached version of the table. Now that the cached entry is removed, does > this need to be such a complex structure rather than just say, a bool > lut_enabled? > > (We will soon add an equivalent clu_enabled too, but I don't know what > other per-table options we'll need.) > > In fact, we'll potentially have other options specific to the HGO, and > CSC at some point in the future - so grouping by entity is indeed a good > thing IMO. You are right, I pondered a bit it this was worth it, but I assume the other CMM functions would have required some more complex fields so I chose to keep it separate. I have no problem to make this a lut_enabled, but I fear as soon as we support say, double buffering for the lut, having a dedicated struct would be nice. Is it ok if I keep this the way it is? > > > +}; > > + > > +static inline int rcar_cmm_read(struct rcar_cmm *rcmm, u32 reg) > > +{ > > + return ioread32(rcmm->base + reg); > > +} > > + > > +static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32 data) > > +{ > > + iowrite32(data, rcmm->base + reg); > > +} > > + > > +/* > > + * rcar_cmm_lut_write() - Scale the DRM LUT table entries to hardware precision > > + * and write to the CMM registers. > > + * @rcmm: Pointer to the CMM device > > + * @drm_lut: Pointer to the DRM LUT table > > + */ > > +static void rcar_cmm_lut_write(struct rcar_cmm *rcmm, > > + const struct drm_color_lut *drm_lut) > > +{ > > + unsigned int i; > > + > > + for (i = 0; i < CM2_LUT_SIZE; ++i) { > > + u32 entry = drm_color_lut_extract(drm_lut[i].red, 8) << 16 > > + | drm_color_lut_extract(drm_lut[i].green, 8) << 8 > > + | drm_color_lut_extract(drm_lut[i].blue, 8); > > + > > + rcar_cmm_write(rcmm, CM2_LUT_TBL(i), entry); > > + } > > +} > > + > > +/* > > + * rcar_cmm_setup() - Configure the CMM unit. > > + * @pdev: The platform device associated with the CMM instance > > + * @config: The CMM unit configuration > > + * > > + * Configure the CMM unit with the given configuration. Currently enabling, > > + * disabling and programming of the 1-D LUT unit is supported. > > + */ > > +int rcar_cmm_setup(struct platform_device *pdev, > > + const struct rcar_cmm_config *config) > > +{ > > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > > + > > + /* Disable LUT if requested. */ > > + if (!config->lut.enable) { > > + if (rcmm->lut.enabled) { > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); > > + rcmm->lut.enabled = false; > > + } > > + > > + return 0; > > + } > > + > > + /* Enable LUT and program the new gamma table values. */ > > + if (!rcmm->lut.enabled) { > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN); > > + rcmm->lut.enabled = true; > > + } > > + > > + rcar_cmm_lut_write(rcmm, config->lut.table); > > + > > + return 0; > > +} > > +EXPORT_SYMBOL_GPL(rcar_cmm_setup); > > + > > +/* > > + * rcar_cmm_enable() - Enable the CMM unit. > > + * @pdev: The platform device associated with the CMM instance > > + * > > + * Enable the CMM unit by enabling the parent clock. > > + */ > > +int rcar_cmm_enable(struct platform_device *pdev) > > +{ > > + int ret; > > + > > + ret = pm_runtime_get_sync(&pdev->dev); > > + if (ret < 0) > > + return ret; > > + > > + return 0; > > +} > > +EXPORT_SYMBOL_GPL(rcar_cmm_enable); > > + > > +/* > > + * rcar_cmm_disable() - Disable the CMM unit. > > + * @pdev: The platform device associated with the CMM instance > > + * > > + * Disable the CMM unit by stopping the parent clock. > > + */ > > +void rcar_cmm_disable(struct platform_device *pdev) > > +{ > > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > > + > > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); > > + rcmm->lut.enabled = false; > > + > > + pm_runtime_put(&pdev->dev); > > +} > > +EXPORT_SYMBOL_GPL(rcar_cmm_disable); > > + > > +/* > > + * rcar_cmm_init() - Initialize the CMM > > + * @pdev: The platform device associated with the CMM instance > > + * > > + * Return: 0 on success, -EPROBE_DEFER if the CMM is not available yet, > > + * -ENODEV if the DRM_RCAR_CMM config option is disabled > > + */ > > +int rcar_cmm_init(struct platform_device *pdev) > > +{ > > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > > + > > + if (!rcmm) > > + return -EPROBE_DEFER; > > + > > + return 0; > > +} > > +EXPORT_SYMBOL_GPL(rcar_cmm_init); > > + > > +static int rcar_cmm_probe(struct platform_device *pdev) > > +{ > > + struct rcar_cmm *rcmm; > > + > > + rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL); > > + if (!rcmm) > > + return -ENOMEM; > > + platform_set_drvdata(pdev, rcmm); > > + > > + rcmm->base = devm_platform_ioremap_resource(pdev, 0); > > + if (IS_ERR(rcmm->base)) > > + return PTR_ERR(rcmm->base); > > + > > + pm_runtime_enable(&pdev->dev); > > + > > + return 0; > > +} > > + > > +static int rcar_cmm_remove(struct platform_device *pdev) > > +{ > > + pm_runtime_disable(&pdev->dev); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id rcar_cmm_of_table[] = { > > + { .compatible = "renesas,rcar-gen3-cmm", }, > > + { .compatible = "renesas,rcar-gen2-cmm", }, > > + { }, > > +}; > > +MODULE_DEVICE_TABLE(of, rcar_cmm_of_table); > > + > > +static struct platform_driver rcar_cmm_platform_driver = { > > + .probe = rcar_cmm_probe, > > + .remove = rcar_cmm_remove, > > + .driver = { > > + .name = "rcar-cmm", > > + .of_match_table = rcar_cmm_of_table, > > + }, > > +}; > > + > > +module_platform_driver(rcar_cmm_platform_driver); > > + > > +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org>"); > > +MODULE_DESCRIPTION("Renesas R-Car CMM Driver"); > > +MODULE_LICENSE("GPL v2"); > > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h b/drivers/gpu/drm/rcar-du/rcar_cmm.h > > new file mode 100644 > > index 000000000000..358ec03cf48a > > --- /dev/null > > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.h > > @@ -0,0 +1,60 @@ > > +/* SPDX-License-Identifier: GPL-2.0+ */ > > +/* > > + * rcar_cmm.h -- R-Car Display Unit Color Management Module > > + * > > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org> > > + */ > > + > > +#ifndef __RCAR_CMM_H__ > > +#define __RCAR_CMM_H__ > > + > > +#define CM2_LUT_SIZE 256 > > + > > +struct drm_color_lut; > > +struct platform_device; > > + > > +/** > > + * struct rcar_cmm_config - CMM configuration > > + * > > + * @lut: 1D-LUT configuration > > + * @lut.enable: 1D-LUT enable flag > > + * @lut.table: 1D-LUT table entries > > + */ > > +struct rcar_cmm_config { > > + struct { > > + bool enable; > > + struct drm_color_lut *table; > > + } lut; > > +}; > > + > > +#if IS_ENABLED(CONFIG_DRM_RCAR_CMM) > > +int rcar_cmm_init(struct platform_device *pdev); > > + > > +int rcar_cmm_enable(struct platform_device *pdev); > > +void rcar_cmm_disable(struct platform_device *pdev); > > + > > +int rcar_cmm_setup(struct platform_device *pdev, > > + const struct rcar_cmm_config *config); > > +#else > > +static inline int rcar_cmm_init(struct platform_device *pdev) > > +{ > > + return -ENODEV; > > Excellent :-D > > +} > > + > > +static inline int rcar_cmm_enable(struct platform_device *pdev) > > +{ > > + return 0; > > +} > > + > > +static inline void rcar_cmm_disable(struct platform_device *pdev) > > +{ > > +} > > + > > +static inline int rcar_cmm_setup(struct platform_device *pdev, > > + const struct rcar_cmm_config *config) > > +{ > > + return 0; > > +} > > +#endif /* IS_ENABLED(CONFIG_DRM_RCAR_CMM) */ > > + > > +#endif /* __RCAR_CMM_H__ */ > > >
On 15/10/2019 14:33, Jacopo Mondi wrote: > Hi Kieran, thanks for review <snip> >>> +config DRM_RCAR_CMM >>> + bool "R-Car DU Color Management Module (CMM) Support" >>> + depends on DRM && OF >>> + depends on DRM_RCAR_DU >> >> >> DRM_RCAR_DU already depends on both DRM && OF, so I wonder if those are >> needed to be specified explicitly. >> >> Doesn't hurt of course, but I see DRM_RCAR_DW_HDMI does the same, and so >> does DRM_RCAR_LVDS, so I don't think you need to remove it. >> > > I did the same as it is done for HDMI and LVDS here. The extra > dependencies could be dropped yes, I chose to be consistent. Consistent is fine with me. <snip> >>> +struct rcar_cmm { >>> + void __iomem *base; >>> + >>> + /* >>> + * @lut: 1D-LUT status >>> + * @lut.enabled: 1D-LUT enabled flag >>> + */ >>> + struct { >>> + bool enabled; >>> + } lut; >> >> This used to be a more complex structure in an earlier version storing a >> cached version of the table. Now that the cached entry is removed, does >> this need to be such a complex structure rather than just say, a bool >> lut_enabled? >> >> (We will soon add an equivalent clu_enabled too, but I don't know what >> other per-table options we'll need.) >> >> In fact, we'll potentially have other options specific to the HGO, and >> CSC at some point in the future - so grouping by entity is indeed a good >> thing IMO. > > You are right, I pondered a bit it this was worth it, but I assume the > other CMM functions would have required some more complex fields so I > chose to keep it separate. I have no problem to make this a > lut_enabled, but I fear as soon as we support say, double buffering > for the lut, having a dedicated struct would be nice. > > Is it ok if I keep this the way it is? Certainly fine for me. (That's what I tried to imply with "so grouping by entity is indeed a good thing IMO.") <snip> -- Kieran
Hi Jacopo, Thank you for the patch. On Tue, Oct 15, 2019 at 12:46:16PM +0200, Jacopo Mondi wrote: > Add a driver for the R-Car Display Unit Color Correction Module. > > In most of Gen3 SoCs, each DU output channel is provided with a CMM unit > to perform image enhancement and color correction. > > Add support for CMM through a driver that supports configuration of > the 1-dimensional LUT table. More advanced CMM features will be > implemented on top of this initial one. > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > --- > drivers/gpu/drm/rcar-du/Kconfig | 7 + > drivers/gpu/drm/rcar-du/Makefile | 1 + > drivers/gpu/drm/rcar-du/rcar_cmm.c | 198 +++++++++++++++++++++++++++++ > drivers/gpu/drm/rcar-du/rcar_cmm.h | 60 +++++++++ > 4 files changed, 266 insertions(+) > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.c > create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.h > > diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig > index 1529849e217e..539d232790d1 100644 > --- a/drivers/gpu/drm/rcar-du/Kconfig > +++ b/drivers/gpu/drm/rcar-du/Kconfig > @@ -13,6 +13,13 @@ config DRM_RCAR_DU > Choose this option if you have an R-Car chipset. > If M is selected the module will be called rcar-du-drm. > > +config DRM_RCAR_CMM > + bool "R-Car DU Color Management Module (CMM) Support" > + depends on DRM && OF > + depends on DRM_RCAR_DU > + help > + Enable support for R-Car Color Management Module (CMM). > + > config DRM_RCAR_DW_HDMI > tristate "R-Car DU Gen3 HDMI Encoder Support" > depends on DRM && OF > diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile > index 6c2ed9c46467..4d1187ccc3e5 100644 > --- a/drivers/gpu/drm/rcar-du/Makefile > +++ b/drivers/gpu/drm/rcar-du/Makefile > @@ -15,6 +15,7 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS) += rcar_du_of.o \ > rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o > rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o > > +obj-$(CONFIG_DRM_RCAR_CMM) += rcar_cmm.o > obj-$(CONFIG_DRM_RCAR_DU) += rcar-du-drm.o > obj-$(CONFIG_DRM_RCAR_DW_HDMI) += rcar_dw_hdmi.o > obj-$(CONFIG_DRM_RCAR_LVDS) += rcar_lvds.o > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c b/drivers/gpu/drm/rcar-du/rcar_cmm.c > new file mode 100644 > index 000000000000..9675a8587dee > --- /dev/null > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.c > @@ -0,0 +1,198 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * rcar_cmm.c -- R-Car Display Unit Color Management Module > + * > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org> > + */ > + > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > + > +#include <drm/drm_color_mgmt.h> > + > +#include "rcar_cmm.h" > + > +#define CM2_LUT_CTRL 0x0000 > +#define CM2_LUT_CTRL_LUT_EN BIT(0) > +#define CM2_LUT_TBL_BASE 0x0600 > +#define CM2_LUT_TBL(__i) (CM2_LUT_TBL_BASE + (__i) * 4) > + > +struct rcar_cmm { > + void __iomem *base; > + > + /* > + * @lut: 1D-LUT status s/status/state/ ? > + * @lut.enabled: 1D-LUT enabled flag > + */ > + struct { > + bool enabled; > + } lut; > +}; > + > +static inline int rcar_cmm_read(struct rcar_cmm *rcmm, u32 reg) > +{ > + return ioread32(rcmm->base + reg); > +} > + > +static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32 data) > +{ > + iowrite32(data, rcmm->base + reg); > +} > + > +/* > + * rcar_cmm_lut_write() - Scale the DRM LUT table entries to hardware precision > + * and write to the CMM registers. Some of you brief descriptions end with a period, some don't. I don't have a preference, but could you please pick one option and use it consistently ? > + * @rcmm: Pointer to the CMM device > + * @drm_lut: Pointer to the DRM LUT table > + */ > +static void rcar_cmm_lut_write(struct rcar_cmm *rcmm, > + const struct drm_color_lut *drm_lut) > +{ > + unsigned int i; > + > + for (i = 0; i < CM2_LUT_SIZE; ++i) { > + u32 entry = drm_color_lut_extract(drm_lut[i].red, 8) << 16 As reported by Kieran, s/= /= / > + | drm_color_lut_extract(drm_lut[i].green, 8) << 8 > + | drm_color_lut_extract(drm_lut[i].blue, 8); > + > + rcar_cmm_write(rcmm, CM2_LUT_TBL(i), entry); > + } > +} > + > +/* > + * rcar_cmm_setup() - Configure the CMM unit. > + * @pdev: The platform device associated with the CMM instance > + * @config: The CMM unit configuration > + * > + * Configure the CMM unit with the given configuration. Currently enabling, > + * disabling and programming of the 1-D LUT unit is supported. > + */ > +int rcar_cmm_setup(struct platform_device *pdev, > + const struct rcar_cmm_config *config) > +{ > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > + > + /* Disable LUT if requested. */ > + if (!config->lut.enable) { > + if (rcmm->lut.enabled) { > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); > + rcmm->lut.enabled = false; > + } > + > + return 0; > + } > + > + /* Enable LUT and program the new gamma table values. */ > + if (!rcmm->lut.enabled) { > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN); > + rcmm->lut.enabled = true; > + } > + > + rcar_cmm_lut_write(rcmm, config->lut.table); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(rcar_cmm_setup); > + > +/* > + * rcar_cmm_enable() - Enable the CMM unit. > + * @pdev: The platform device associated with the CMM instance > + * > + * Enable the CMM unit by enabling the parent clock. It would be better to explain how the function should be used rather than what it does internally. * Enable the CMM unit. When the output of the corresponding DU channel is * routed to the CMM unit, the unit shall be enabled before the DU channel is * started, and remain enabled until the channel is stopped. The CMM unit shall * the be disabled with rcar_cmm_disable(). * * Calls to rcar_cmm_enable() and rcar_cmm_disable() are not reference-counted. * It is an error to attempt to enable an already enabled CMM unit, or to * attempt to disable a disabled unit. The relationship with rcar_cmm_setup() should also be documented. Looking at the code, I believe rcar_cmm_enable() has to be called first, otherwise the CMM MSTP will be disabled, and registers can't be accessed. I would document this as part of the rcar_cmm_setup() function. > + */ > +int rcar_cmm_enable(struct platform_device *pdev) > +{ > + int ret; > + > + ret = pm_runtime_get_sync(&pdev->dev); > + if (ret < 0) > + return ret; > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(rcar_cmm_enable); > + > +/* > + * rcar_cmm_disable() - Disable the CMM unit. > + * @pdev: The platform device associated with the CMM instance > + * > + * Disable the CMM unit by stopping the parent clock. Same here, but you can simply reference rcar_cmm_enable(). * Disable the CMM unit. See rcar_cmm_enable() for usage information. * * Disabling the CMM unit disable all the internal processing blocks. The CMM * state shall thus be restored with rcar_cmm_setup() when re-enabling the CMM * unit after the next rcar_cmm_enable() call. > + */ > +void rcar_cmm_disable(struct platform_device *pdev) > +{ > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > + > + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); > + rcmm->lut.enabled = false; > + > + pm_runtime_put(&pdev->dev); > +} > +EXPORT_SYMBOL_GPL(rcar_cmm_disable); > + > +/* > + * rcar_cmm_init() - Initialize the CMM > + * @pdev: The platform device associated with the CMM instance > + * > + * Return: 0 on success, -EPROBE_DEFER if the CMM is not available yet, > + * -ENODEV if the DRM_RCAR_CMM config option is disabled > + */ > +int rcar_cmm_init(struct platform_device *pdev) > +{ > + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); > + > + if (!rcmm) > + return -EPROBE_DEFER; > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(rcar_cmm_init); > + > +static int rcar_cmm_probe(struct platform_device *pdev) > +{ > + struct rcar_cmm *rcmm; > + > + rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL); > + if (!rcmm) > + return -ENOMEM; > + platform_set_drvdata(pdev, rcmm); > + > + rcmm->base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(rcmm->base)) > + return PTR_ERR(rcmm->base); > + > + pm_runtime_enable(&pdev->dev); > + > + return 0; > +} > + > +static int rcar_cmm_remove(struct platform_device *pdev) > +{ > + pm_runtime_disable(&pdev->dev); > + > + return 0; > +} > + > +static const struct of_device_id rcar_cmm_of_table[] = { > + { .compatible = "renesas,rcar-gen3-cmm", }, > + { .compatible = "renesas,rcar-gen2-cmm", }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, rcar_cmm_of_table); > + > +static struct platform_driver rcar_cmm_platform_driver = { > + .probe = rcar_cmm_probe, > + .remove = rcar_cmm_remove, > + .driver = { > + .name = "rcar-cmm", > + .of_match_table = rcar_cmm_of_table, > + }, > +}; > + > +module_platform_driver(rcar_cmm_platform_driver); > + > +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org>"); > +MODULE_DESCRIPTION("Renesas R-Car CMM Driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h b/drivers/gpu/drm/rcar-du/rcar_cmm.h > new file mode 100644 > index 000000000000..358ec03cf48a > --- /dev/null > +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.h > @@ -0,0 +1,60 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * rcar_cmm.h -- R-Car Display Unit Color Management Module > + * > + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org> > + */ > + > +#ifndef __RCAR_CMM_H__ > +#define __RCAR_CMM_H__ > + > +#define CM2_LUT_SIZE 256 > + > +struct drm_color_lut; > +struct platform_device; > + > +/** > + * struct rcar_cmm_config - CMM configuration > + * > + * @lut: 1D-LUT configuration > + * @lut.enable: 1D-LUT enable flag > + * @lut.table: 1D-LUT table entries > + */ > +struct rcar_cmm_config { > + struct { > + bool enable; > + struct drm_color_lut *table; As enable == true implies table != NULL, and enable == false implies table == NULL, could we drop the enable field ? With those small issues addressed, Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + } lut; > +}; > + > +#if IS_ENABLED(CONFIG_DRM_RCAR_CMM) > +int rcar_cmm_init(struct platform_device *pdev); > + > +int rcar_cmm_enable(struct platform_device *pdev); > +void rcar_cmm_disable(struct platform_device *pdev); > + > +int rcar_cmm_setup(struct platform_device *pdev, > + const struct rcar_cmm_config *config); > +#else > +static inline int rcar_cmm_init(struct platform_device *pdev) > +{ > + return -ENODEV; > +} > + > +static inline int rcar_cmm_enable(struct platform_device *pdev) > +{ > + return 0; > +} > + > +static inline void rcar_cmm_disable(struct platform_device *pdev) > +{ > +} > + > +static inline int rcar_cmm_setup(struct platform_device *pdev, > + const struct rcar_cmm_config *config) > +{ > + return 0; > +} > +#endif /* IS_ENABLED(CONFIG_DRM_RCAR_CMM) */ > + > +#endif /* __RCAR_CMM_H__ */
diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig index 1529849e217e..539d232790d1 100644 --- a/drivers/gpu/drm/rcar-du/Kconfig +++ b/drivers/gpu/drm/rcar-du/Kconfig @@ -13,6 +13,13 @@ config DRM_RCAR_DU Choose this option if you have an R-Car chipset. If M is selected the module will be called rcar-du-drm. +config DRM_RCAR_CMM + bool "R-Car DU Color Management Module (CMM) Support" + depends on DRM && OF + depends on DRM_RCAR_DU + help + Enable support for R-Car Color Management Module (CMM). + config DRM_RCAR_DW_HDMI tristate "R-Car DU Gen3 HDMI Encoder Support" depends on DRM && OF diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile index 6c2ed9c46467..4d1187ccc3e5 100644 --- a/drivers/gpu/drm/rcar-du/Makefile +++ b/drivers/gpu/drm/rcar-du/Makefile @@ -15,6 +15,7 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS) += rcar_du_of.o \ rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o +obj-$(CONFIG_DRM_RCAR_CMM) += rcar_cmm.o obj-$(CONFIG_DRM_RCAR_DU) += rcar-du-drm.o obj-$(CONFIG_DRM_RCAR_DW_HDMI) += rcar_dw_hdmi.o obj-$(CONFIG_DRM_RCAR_LVDS) += rcar_lvds.o diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c b/drivers/gpu/drm/rcar-du/rcar_cmm.c new file mode 100644 index 000000000000..9675a8587dee --- /dev/null +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.c @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * rcar_cmm.c -- R-Car Display Unit Color Management Module + * + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org> + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> + +#include <drm/drm_color_mgmt.h> + +#include "rcar_cmm.h" + +#define CM2_LUT_CTRL 0x0000 +#define CM2_LUT_CTRL_LUT_EN BIT(0) +#define CM2_LUT_TBL_BASE 0x0600 +#define CM2_LUT_TBL(__i) (CM2_LUT_TBL_BASE + (__i) * 4) + +struct rcar_cmm { + void __iomem *base; + + /* + * @lut: 1D-LUT status + * @lut.enabled: 1D-LUT enabled flag + */ + struct { + bool enabled; + } lut; +}; + +static inline int rcar_cmm_read(struct rcar_cmm *rcmm, u32 reg) +{ + return ioread32(rcmm->base + reg); +} + +static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32 data) +{ + iowrite32(data, rcmm->base + reg); +} + +/* + * rcar_cmm_lut_write() - Scale the DRM LUT table entries to hardware precision + * and write to the CMM registers. + * @rcmm: Pointer to the CMM device + * @drm_lut: Pointer to the DRM LUT table + */ +static void rcar_cmm_lut_write(struct rcar_cmm *rcmm, + const struct drm_color_lut *drm_lut) +{ + unsigned int i; + + for (i = 0; i < CM2_LUT_SIZE; ++i) { + u32 entry = drm_color_lut_extract(drm_lut[i].red, 8) << 16 + | drm_color_lut_extract(drm_lut[i].green, 8) << 8 + | drm_color_lut_extract(drm_lut[i].blue, 8); + + rcar_cmm_write(rcmm, CM2_LUT_TBL(i), entry); + } +} + +/* + * rcar_cmm_setup() - Configure the CMM unit. + * @pdev: The platform device associated with the CMM instance + * @config: The CMM unit configuration + * + * Configure the CMM unit with the given configuration. Currently enabling, + * disabling and programming of the 1-D LUT unit is supported. + */ +int rcar_cmm_setup(struct platform_device *pdev, + const struct rcar_cmm_config *config) +{ + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); + + /* Disable LUT if requested. */ + if (!config->lut.enable) { + if (rcmm->lut.enabled) { + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); + rcmm->lut.enabled = false; + } + + return 0; + } + + /* Enable LUT and program the new gamma table values. */ + if (!rcmm->lut.enabled) { + rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN); + rcmm->lut.enabled = true; + } + + rcar_cmm_lut_write(rcmm, config->lut.table); + + return 0; +} +EXPORT_SYMBOL_GPL(rcar_cmm_setup); + +/* + * rcar_cmm_enable() - Enable the CMM unit. + * @pdev: The platform device associated with the CMM instance + * + * Enable the CMM unit by enabling the parent clock. + */ +int rcar_cmm_enable(struct platform_device *pdev) +{ + int ret; + + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL_GPL(rcar_cmm_enable); + +/* + * rcar_cmm_disable() - Disable the CMM unit. + * @pdev: The platform device associated with the CMM instance + * + * Disable the CMM unit by stopping the parent clock. + */ +void rcar_cmm_disable(struct platform_device *pdev) +{ + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); + + rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0); + rcmm->lut.enabled = false; + + pm_runtime_put(&pdev->dev); +} +EXPORT_SYMBOL_GPL(rcar_cmm_disable); + +/* + * rcar_cmm_init() - Initialize the CMM + * @pdev: The platform device associated with the CMM instance + * + * Return: 0 on success, -EPROBE_DEFER if the CMM is not available yet, + * -ENODEV if the DRM_RCAR_CMM config option is disabled + */ +int rcar_cmm_init(struct platform_device *pdev) +{ + struct rcar_cmm *rcmm = platform_get_drvdata(pdev); + + if (!rcmm) + return -EPROBE_DEFER; + + return 0; +} +EXPORT_SYMBOL_GPL(rcar_cmm_init); + +static int rcar_cmm_probe(struct platform_device *pdev) +{ + struct rcar_cmm *rcmm; + + rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL); + if (!rcmm) + return -ENOMEM; + platform_set_drvdata(pdev, rcmm); + + rcmm->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(rcmm->base)) + return PTR_ERR(rcmm->base); + + pm_runtime_enable(&pdev->dev); + + return 0; +} + +static int rcar_cmm_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static const struct of_device_id rcar_cmm_of_table[] = { + { .compatible = "renesas,rcar-gen3-cmm", }, + { .compatible = "renesas,rcar-gen2-cmm", }, + { }, +}; +MODULE_DEVICE_TABLE(of, rcar_cmm_of_table); + +static struct platform_driver rcar_cmm_platform_driver = { + .probe = rcar_cmm_probe, + .remove = rcar_cmm_remove, + .driver = { + .name = "rcar-cmm", + .of_match_table = rcar_cmm_of_table, + }, +}; + +module_platform_driver(rcar_cmm_platform_driver); + +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org>"); +MODULE_DESCRIPTION("Renesas R-Car CMM Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h b/drivers/gpu/drm/rcar-du/rcar_cmm.h new file mode 100644 index 000000000000..358ec03cf48a --- /dev/null +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * rcar_cmm.h -- R-Car Display Unit Color Management Module + * + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org> + */ + +#ifndef __RCAR_CMM_H__ +#define __RCAR_CMM_H__ + +#define CM2_LUT_SIZE 256 + +struct drm_color_lut; +struct platform_device; + +/** + * struct rcar_cmm_config - CMM configuration + * + * @lut: 1D-LUT configuration + * @lut.enable: 1D-LUT enable flag + * @lut.table: 1D-LUT table entries + */ +struct rcar_cmm_config { + struct { + bool enable; + struct drm_color_lut *table; + } lut; +}; + +#if IS_ENABLED(CONFIG_DRM_RCAR_CMM) +int rcar_cmm_init(struct platform_device *pdev); + +int rcar_cmm_enable(struct platform_device *pdev); +void rcar_cmm_disable(struct platform_device *pdev); + +int rcar_cmm_setup(struct platform_device *pdev, + const struct rcar_cmm_config *config); +#else +static inline int rcar_cmm_init(struct platform_device *pdev) +{ + return -ENODEV; +} + +static inline int rcar_cmm_enable(struct platform_device *pdev) +{ + return 0; +} + +static inline void rcar_cmm_disable(struct platform_device *pdev) +{ +} + +static inline int rcar_cmm_setup(struct platform_device *pdev, + const struct rcar_cmm_config *config) +{ + return 0; +} +#endif /* IS_ENABLED(CONFIG_DRM_RCAR_CMM) */ + +#endif /* __RCAR_CMM_H__ */
Add a driver for the R-Car Display Unit Color Correction Module. In most of Gen3 SoCs, each DU output channel is provided with a CMM unit to perform image enhancement and color correction. Add support for CMM through a driver that supports configuration of the 1-dimensional LUT table. More advanced CMM features will be implemented on top of this initial one. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- drivers/gpu/drm/rcar-du/Kconfig | 7 + drivers/gpu/drm/rcar-du/Makefile | 1 + drivers/gpu/drm/rcar-du/rcar_cmm.c | 198 +++++++++++++++++++++++++++++ drivers/gpu/drm/rcar-du/rcar_cmm.h | 60 +++++++++ 4 files changed, 266 insertions(+) create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.c create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.h