diff mbox series

[V5,2/3] dt-bindings: Add Logic PD Type 28 display panel

Message ID 20191016135147.7743-2-aford173@gmail.com (mailing list archive)
State New, archived
Headers show
Series [V5,1/3] drm/panel: simple: Add Logic PD Type 28 display support | expand

Commit Message

Adam Ford Oct. 16, 2019, 1:51 p.m. UTC
This patch adds documentation of device tree bindings for the WVGA panel
Logic PD Type 28 display.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V5:  Replace GPIO_ACTIVE_HIGH with 0 to fix make dt_binding_check -k
V4:  Update per Rob H's suggestions and copy other panel yaml example from 5.4-rc1
V3:  Correct build errors from 'make dt_binding_check'
V2:  Use YAML instead of TXT for binding

Comments

Laurent Pinchart Oct. 16, 2019, 2:40 p.m. UTC | #1
Hi Adam,

Thank you for the patch.

On Wed, Oct 16, 2019 at 08:51:46AM -0500, Adam Ford wrote:
> This patch adds documentation of device tree bindings for the WVGA panel
> Logic PD Type 28 display.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> V5:  Replace GPIO_ACTIVE_HIGH with 0 to fix make dt_binding_check -k
> V4:  Update per Rob H's suggestions and copy other panel yaml example from 5.4-rc1
> V3:  Correct build errors from 'make dt_binding_check'
> V2:  Use YAML instead of TXT for binding
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> new file mode 100644
> index 000000000000..2834287b8d88
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
> +
> +maintainers:
> +  - Adam Ford <aford173@gmail.com>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: logicpd,type28
> +
> +  power-supply: true
> +  enable-gpios: true
> +  backlight: true
> +  port: true
> +
> +required:
> +  - compatible

Should the port be required too ? Apart from that,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    lcd0: display {
> +      compatible = "logicpd,type28";
> +      enable-gpios = <&gpio5 27 0>;
> +      backlight = <&backlight>;
> +      port {
> +        lcd_in: endpoint {
> +          remote-endpoint = <&dpi_out>;
> +        };
> +      };
> +    };
> +
> +...
Adam Ford Oct. 16, 2019, 2:55 p.m. UTC | #2
On Wed, Oct 16, 2019 at 9:40 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Adam,
>
> Thank you for the patch.
>
> On Wed, Oct 16, 2019 at 08:51:46AM -0500, Adam Ford wrote:
> > This patch adds documentation of device tree bindings for the WVGA panel
> > Logic PD Type 28 display.
> >
> > Signed-off-by: Adam Ford <aford173@gmail.com>
> > ---
> > V5:  Replace GPIO_ACTIVE_HIGH with 0 to fix make dt_binding_check -k
> > V4:  Update per Rob H's suggestions and copy other panel yaml example from 5.4-rc1
> > V3:  Correct build errors from 'make dt_binding_check'
> > V2:  Use YAML instead of TXT for binding
> >
> > diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> > new file mode 100644
> > index 000000000000..2834287b8d88
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> > @@ -0,0 +1,42 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
> > +
> > +maintainers:
> > +  - Adam Ford <aford173@gmail.com>
> > +
> > +allOf:
> > +  - $ref: panel-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: logicpd,type28
> > +
> > +  power-supply: true
> > +  enable-gpios: true
> > +  backlight: true
> > +  port: true
> > +
> > +required:
> > +  - compatible
>
> Should the port be required too ? Apart from that,

I supposed that's true, but I used ampire,am-480272h3tmqw-t01h.yaml as
the example, and it doesn't list it as a required item.
Is there anything else I need to address?  I feel like I'm trying to
hit a moving target.

adam
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    lcd0: display {
> > +      compatible = "logicpd,type28";
> > +      enable-gpios = <&gpio5 27 0>;
> > +      backlight = <&backlight>;
> > +      port {
> > +        lcd_in: endpoint {
> > +          remote-endpoint = <&dpi_out>;
> > +        };
> > +      };
> > +    };
> > +
> > +...
>
> --
> Regards,
>
> Laurent Pinchart
Rob Herring (Arm) Oct. 17, 2019, 2:37 p.m. UTC | #3
On Wed, Oct 16, 2019 at 09:55:11AM -0500, Adam Ford wrote:
> On Wed, Oct 16, 2019 at 9:40 AM Laurent Pinchart
> <laurent.pinchart@ideasonboard.com> wrote:
> >
> > Hi Adam,
> >
> > Thank you for the patch.
> >
> > On Wed, Oct 16, 2019 at 08:51:46AM -0500, Adam Ford wrote:
> > > This patch adds documentation of device tree bindings for the WVGA panel
> > > Logic PD Type 28 display.
> > >
> > > Signed-off-by: Adam Ford <aford173@gmail.com>
> > > ---
> > > V5:  Replace GPIO_ACTIVE_HIGH with 0 to fix make dt_binding_check -k
> > > V4:  Update per Rob H's suggestions and copy other panel yaml example from 5.4-rc1
> > > V3:  Correct build errors from 'make dt_binding_check'
> > > V2:  Use YAML instead of TXT for binding
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> > > new file mode 100644
> > > index 000000000000..2834287b8d88
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> > > @@ -0,0 +1,42 @@
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
> > > +
> > > +maintainers:
> > > +  - Adam Ford <aford173@gmail.com>
> > > +
> > > +allOf:
> > > +  - $ref: panel-common.yaml#
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: logicpd,type28
> > > +
> > > +  power-supply: true
> > > +  enable-gpios: true
> > > +  backlight: true
> > > +  port: true
> > > +
> > > +required:
> > > +  - compatible
> >
> > Should the port be required too ? Apart from that,
> 
> I supposed that's true, but I used ampire,am-480272h3tmqw-t01h.yaml as
> the example, and it doesn't list it as a required item.
> Is there anything else I need to address?  I feel like I'm trying to
> hit a moving target.

'port' can be omitted because the panel can be a child node of 
the display controller instead. That's decided by the display controller 
binding, not the panel binding.

Reviewed-by: Rob Herring <robh@kernel.org>

Rob
Adam Ford Oct. 17, 2019, 2:42 p.m. UTC | #4
On Thu, Oct 17, 2019 at 9:37 AM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Oct 16, 2019 at 09:55:11AM -0500, Adam Ford wrote:
> > On Wed, Oct 16, 2019 at 9:40 AM Laurent Pinchart
> > <laurent.pinchart@ideasonboard.com> wrote:
> > >
> > > Hi Adam,
> > >
> > > Thank you for the patch.
> > >
> > > On Wed, Oct 16, 2019 at 08:51:46AM -0500, Adam Ford wrote:
> > > > This patch adds documentation of device tree bindings for the WVGA panel
> > > > Logic PD Type 28 display.
> > > >
> > > > Signed-off-by: Adam Ford <aford173@gmail.com>
> > > > ---
> > > > V5:  Replace GPIO_ACTIVE_HIGH with 0 to fix make dt_binding_check -k
> > > > V4:  Update per Rob H's suggestions and copy other panel yaml example from 5.4-rc1
> > > > V3:  Correct build errors from 'make dt_binding_check'
> > > > V2:  Use YAML instead of TXT for binding
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> > > > new file mode 100644
> > > > index 000000000000..2834287b8d88
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> > > > @@ -0,0 +1,42 @@
> > > > +# SPDX-License-Identifier: GPL-2.0
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
> > > > +
> > > > +maintainers:
> > > > +  - Adam Ford <aford173@gmail.com>
> > > > +
> > > > +allOf:
> > > > +  - $ref: panel-common.yaml#
> > > > +
> > > > +properties:
> > > > +  compatible:
> > > > +    const: logicpd,type28
> > > > +
> > > > +  power-supply: true
> > > > +  enable-gpios: true
> > > > +  backlight: true
> > > > +  port: true
> > > > +
> > > > +required:
> > > > +  - compatible
> > >
> > > Should the port be required too ? Apart from that,
> >
> > I supposed that's true, but I used ampire,am-480272h3tmqw-t01h.yaml as
> > the example, and it doesn't list it as a required item.
> > Is there anything else I need to address?  I feel like I'm trying to
> > hit a moving target.
>
> 'port' can be omitted because the panel can be a child node of
> the display controller instead. That's decided by the display controller
> binding, not the panel binding.
>
> Reviewed-by: Rob Herring <robh@kernel.org>

Thank you.  Sorry it took a while to get there.

adam
>
> Rob
Sam Ravnborg Nov. 30, 2019, 10:15 p.m. UTC | #5
Hi Adam.
On Wed, Oct 16, 2019 at 08:51:46AM -0500, Adam Ford wrote:
> This patch adds documentation of device tree bindings for the WVGA panel
> Logic PD Type 28 display.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> V5:  Replace GPIO_ACTIVE_HIGH with 0 to fix make dt_binding_check -k
> V4:  Update per Rob H's suggestions and copy other panel yaml example from 5.4-rc1
> V3:  Correct build errors from 'make dt_binding_check'
> V2:  Use YAML instead of TXT for binding
> 

Applied to drm-misc-next.
It was applied before the driver changes so we had bindings
for the driver changes when applied.

	Sam
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
new file mode 100644
index 000000000000..2834287b8d88
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
@@ -0,0 +1,42 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
+
+maintainers:
+  - Adam Ford <aford173@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: logicpd,type28
+
+  power-supply: true
+  enable-gpios: true
+  backlight: true
+  port: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    lcd0: display {
+      compatible = "logicpd,type28";
+      enable-gpios = <&gpio5 27 0>;
+      backlight = <&backlight>;
+      port {
+        lcd_in: endpoint {
+          remote-endpoint = <&dpi_out>;
+        };
+      };
+    };
+
+...