diff mbox series

[v3,01/10] dt-bindings: sram: Convert SRAM bindings to json-schema

Message ID 20191002164316.14905-1-krzk@kernel.org (mailing list archive)
State New, archived
Headers show
Series [v3,01/10] dt-bindings: sram: Convert SRAM bindings to json-schema | expand

Commit Message

Krzysztof Kozlowski Oct. 2, 2019, 4:43 p.m. UTC
Convert generic mmio-sram bindings to DT schema format using
json-schema.  Require the address/size cells to be 1, not equal to root
node.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v2:
1. Add Rob as maintainer,
2. Use "contains" for compatible,
3. Fix address and size cells to 1,
4. Add maxitems to reg under children,
5. Remove unneeded string type from label.

Changes since v1:
1. Indent example with four spaces (more readable).
---
 .../devicetree/bindings/sram/sram.txt         |  80 -----------
 .../devicetree/bindings/sram/sram.yaml        | 134 ++++++++++++++++++
 2 files changed, 134 insertions(+), 80 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sram/sram.txt
 create mode 100644 Documentation/devicetree/bindings/sram/sram.yaml

Comments

Rob Herring (Arm) Oct. 10, 2019, 7:12 p.m. UTC | #1
On Wed, Oct 02, 2019 at 06:43:07PM +0200, Krzysztof Kozlowski wrote:
> Convert generic mmio-sram bindings to DT schema format using
> json-schema.  Require the address/size cells to be 1, not equal to root
> node.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 
> ---
> 
> Changes since v2:
> 1. Add Rob as maintainer,
> 2. Use "contains" for compatible,
> 3. Fix address and size cells to 1,
> 4. Add maxitems to reg under children,
> 5. Remove unneeded string type from label.
> 
> Changes since v1:
> 1. Indent example with four spaces (more readable).
> ---
>  .../devicetree/bindings/sram/sram.txt         |  80 -----------
>  .../devicetree/bindings/sram/sram.yaml        | 134 ++++++++++++++++++
>  2 files changed, 134 insertions(+), 80 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sram/sram.txt
>  create mode 100644 Documentation/devicetree/bindings/sram/sram.yaml


> diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
> new file mode 100644
> index 000000000000..a1c1ec2183f2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sram/sram.yaml
> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sram/sram.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Generic on-chip SRAM
> +
> +maintainers:
> +  - Rob Herring <robh@kernel.org>
> +
> +description: |+
> +  Simple IO memory regions to be managed by the genalloc API.
> +
> +  Each child of the sram node specifies a region of reserved memory. Each
> +  child node should use a 'reg' property to specify a specific range of
> +  reserved memory.
> +
> +  Following the generic-names recommended practice, node names should
> +  reflect the purpose of the node. Unit address (@<address>) should be
> +  appended to the name.
> +
> +properties:
> +  $nodename:
> +    pattern: "^sram(@.*)?"
> +
> +  compatible:
> +    contains:
> +      enum:
> +        - mmio-sram
> +        - atmel,sama5d2-securam
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +  ranges:
> +    description:
> +      Should translate from local addresses within the sram to bus addresses.
> +
> +  no-memory-wc:
> +    description:
> +      The flag indicating, that SRAM memory region has not to be remapped
> +      as write combining. WC is used by default.
> +    type: boolean
> +
> +patternProperties:
> +  "^([a-z]*-)?sram@[a-f0-9]$":
> +    type: object
> +    description:
> +      Each child of the sram node specifies a region of reserved memory.
> +    properties:
> +      reg:
> +        description:
> +          IO mem address range, relative to the SRAM range.
> +        maxItems: 1
> +
> +      compatible:
> +        $ref: /schemas/types.yaml#/definitions/string

No need to define the type again. We can say 'maxItems: 1' if we really 
want to force it to 1 entry.

> +        description:
> +          Should contain a vendor specific string in the form
> +          <vendor>,[<device>-]<usage>
> +
> +      pool:
> +        description:
> +          Indicates that the particular reserved SRAM area is addressable
> +          and in use by another device or devices.
> +        type: boolean
> +
> +      export:
> +        description:
> +          Indicates that the reserved SRAM area may be accessed outside
> +          of the kernel, e.g. by bootloader or userspace.
> +        type: boolean
> +
> +      protect-exec:
> +        description: |
> +          Same as 'pool' above but with the additional constraint that code
> +          will be run from the region and that the memory is maintained as
> +          read-only, executable during code execution. NOTE: This region must
> +          be page aligned on start and end in order to properly allow
> +          manipulation of the page attributes.
> +        type: boolean
> +
> +      label:
> +        description:
> +          The name for the reserved partition, if omitted, the label is taken
> +          from the node name excluding the unit address.
> +
> +      clocks:

Shouldn't this be up one level? Looks like this is the only case 
(Marvell and i.MX are the only ones I see with clocks).

> +        description:
> +          A list of phandle and clock specifier pair that controls the
> +          single SRAM clock.

maxItems: 1

> +
> +    required:
> +      - reg
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges

Does 'additionalProperties' work here and/or in the child node? I guess 
not if we keep some node names.

> +
> +examples:
> +  - |
> +    sram: sram@5c000000 {
> +        compatible = "mmio-sram";
> +        reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
> +
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges = <0 0x5c000000 0x40000>;
> +
> +        smp-sram@100 {
> +            compatible = "socvendor,smp-sram";
> +            reg = <0x100 0x50>;
> +        };
> +
> +        device-sram@1000 {
> +            reg = <0x1000 0x1000>;
> +            pool;
> +        };
> +
> +        exported@20000 {

This one doesn't match the pattern. That's fine I guess for dts files, 
but examples should be good examples.

> +            reg = <0x20000 0x20000>;
> +            export;
> +        };
> +    };
> -- 
> 2.17.1
>
Krzysztof Kozlowski Oct. 21, 2019, 1:25 p.m. UTC | #2
On Thu, Oct 10, 2019 at 02:12:40PM -0500, Rob Herring wrote:
> On Wed, Oct 02, 2019 at 06:43:07PM +0200, Krzysztof Kozlowski wrote:
> > Convert generic mmio-sram bindings to DT schema format using
> > json-schema.  Require the address/size cells to be 1, not equal to root
> > node.
> > 
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > 
> > ---
> > 
> > Changes since v2:
> > 1. Add Rob as maintainer,
> > 2. Use "contains" for compatible,
> > 3. Fix address and size cells to 1,
> > 4. Add maxitems to reg under children,
> > 5. Remove unneeded string type from label.
> > 
> > Changes since v1:
> > 1. Indent example with four spaces (more readable).
> > ---
> >  .../devicetree/bindings/sram/sram.txt         |  80 -----------
> >  .../devicetree/bindings/sram/sram.yaml        | 134 ++++++++++++++++++
> >  2 files changed, 134 insertions(+), 80 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/sram/sram.txt
> >  create mode 100644 Documentation/devicetree/bindings/sram/sram.yaml
> 
> 
> > diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
> > new file mode 100644
> > index 000000000000..a1c1ec2183f2
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sram/sram.yaml
> > @@ -0,0 +1,134 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/sram/sram.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Generic on-chip SRAM
> > +
> > +maintainers:
> > +  - Rob Herring <robh@kernel.org>
> > +
> > +description: |+
> > +  Simple IO memory regions to be managed by the genalloc API.
> > +
> > +  Each child of the sram node specifies a region of reserved memory. Each
> > +  child node should use a 'reg' property to specify a specific range of
> > +  reserved memory.
> > +
> > +  Following the generic-names recommended practice, node names should
> > +  reflect the purpose of the node. Unit address (@<address>) should be
> > +  appended to the name.
> > +
> > +properties:
> > +  $nodename:
> > +    pattern: "^sram(@.*)?"
> > +
> > +  compatible:
> > +    contains:
> > +      enum:
> > +        - mmio-sram
> > +        - atmel,sama5d2-securam
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  "#size-cells":
> > +    const: 1
> > +
> > +  ranges:
> > +    description:
> > +      Should translate from local addresses within the sram to bus addresses.
> > +
> > +  no-memory-wc:
> > +    description:
> > +      The flag indicating, that SRAM memory region has not to be remapped
> > +      as write combining. WC is used by default.
> > +    type: boolean
> > +
> > +patternProperties:
> > +  "^([a-z]*-)?sram@[a-f0-9]$":
> > +    type: object
> > +    description:
> > +      Each child of the sram node specifies a region of reserved memory.
> > +    properties:
> > +      reg:
> > +        description:
> > +          IO mem address range, relative to the SRAM range.
> > +        maxItems: 1
> > +
> > +      compatible:
> > +        $ref: /schemas/types.yaml#/definitions/string
> 
> No need to define the type again. We can say 'maxItems: 1' if we really 
> want to force it to 1 entry.

I'll fix it and integrate Samsung compatibles here.

> 
> > +        description:
> > +          Should contain a vendor specific string in the form
> > +          <vendor>,[<device>-]<usage>
> > +
> > +      pool:
> > +        description:
> > +          Indicates that the particular reserved SRAM area is addressable
> > +          and in use by another device or devices.
> > +        type: boolean
> > +
> > +      export:
> > +        description:
> > +          Indicates that the reserved SRAM area may be accessed outside
> > +          of the kernel, e.g. by bootloader or userspace.
> > +        type: boolean
> > +
> > +      protect-exec:
> > +        description: |
> > +          Same as 'pool' above but with the additional constraint that code
> > +          will be run from the region and that the memory is maintained as
> > +          read-only, executable during code execution. NOTE: This region must
> > +          be page aligned on start and end in order to properly allow
> > +          manipulation of the page attributes.
> > +        type: boolean
> > +
> > +      label:
> > +        description:
> > +          The name for the reserved partition, if omitted, the label is taken
> > +          from the node name excluding the unit address.
> > +
> > +      clocks:
> 
> Shouldn't this be up one level? Looks like this is the only case 
> (Marvell and i.MX are the only ones I see with clocks).

Yes, that's a mistake in original bindings.

> 
> > +        description:
> > +          A list of phandle and clock specifier pair that controls the
> > +          single SRAM clock.
> 
> maxItems: 1

Yes.

> 
> > +
> > +    required:
> > +      - reg
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +  - ranges
> 
> Does 'additionalProperties' work here and/or in the child node? I guess 
> not if we keep some node names.

It seems that it works.

> 
> > +
> > +examples:
> > +  - |
> > +    sram: sram@5c000000 {
> > +        compatible = "mmio-sram";
> > +        reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
> > +
> > +        #address-cells = <1>;
> > +        #size-cells = <1>;
> > +        ranges = <0 0x5c000000 0x40000>;
> > +
> > +        smp-sram@100 {
> > +            compatible = "socvendor,smp-sram";
> > +            reg = <0x100 0x50>;
> > +        };
> > +
> > +        device-sram@1000 {
> > +            reg = <0x1000 0x1000>;
> > +            pool;
> > +        };
> > +
> > +        exported@20000 {
> 
> This one doesn't match the pattern. That's fine I guess for dts files, 
> but examples should be good examples.

Sure.

Best regards,
Krzysztof

> 
> > +            reg = <0x20000 0x20000>;
> > +            export;
> > +        };
> > +    };
> > -- 
> > 2.17.1
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sram/sram.txt b/Documentation/devicetree/bindings/sram/sram.txt
deleted file mode 100644
index e98908bd4227..000000000000
--- a/Documentation/devicetree/bindings/sram/sram.txt
+++ /dev/null
@@ -1,80 +0,0 @@ 
-Generic on-chip SRAM
-
-Simple IO memory regions to be managed by the genalloc API.
-
-Required properties:
-
-- compatible : mmio-sram or atmel,sama5d2-securam
-
-- reg : SRAM iomem address range
-
-Reserving sram areas:
----------------------
-
-Each child of the sram node specifies a region of reserved memory. Each
-child node should use a 'reg' property to specify a specific range of
-reserved memory.
-
-Following the generic-names recommended practice, node names should
-reflect the purpose of the node. Unit address (@<address>) should be
-appended to the name.
-
-Required properties in the sram node:
-
-- #address-cells, #size-cells : should use the same values as the root node
-- ranges : standard definition, should translate from local addresses
-           within the sram to bus addresses
-
-Optional properties in the sram node:
-
-- no-memory-wc : the flag indicating, that SRAM memory region has not to
-                 be remapped as write combining. WC is used by default.
-
-Required properties in the area nodes:
-
-- reg : iomem address range, relative to the SRAM range
-
-Optional properties in the area nodes:
-
-- compatible : standard definition, should contain a vendor specific string
-               in the form <vendor>,[<device>-]<usage>
-- pool : indicates that the particular reserved SRAM area is addressable
-         and in use by another device or devices
-- export : indicates that the reserved SRAM area may be accessed outside
-           of the kernel, e.g. by bootloader or userspace
-- protect-exec : Same as 'pool' above but with the additional
-		 constraint that code wil be run from the region and
-		 that the memory is maintained as read-only, executable
-		 during code execution. NOTE: This region must be page
-		 aligned on start and end in order to properly allow
-		 manipulation of the page attributes.
-- label : the name for the reserved partition, if omitted, the label
-          is taken from the node name excluding the unit address.
-- clocks : a list of phandle and clock specifier pair that controls the
-	   single SRAM clock.
-
-Example:
-
-sram: sram@5c000000 {
-	compatible = "mmio-sram";
-	reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 0x5c000000 0x40000>;
-
-	smp-sram@100 {
-		compatible = "socvendor,smp-sram";
-		reg = <0x100 0x50>;
-	};
-
-	device-sram@1000 {
-		reg = <0x1000 0x1000>;
-		pool;
-	};
-
-	exported@20000 {
-		reg = <0x20000 0x20000>;
-		export;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
new file mode 100644
index 000000000000..a1c1ec2183f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -0,0 +1,134 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic on-chip SRAM
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |+
+  Simple IO memory regions to be managed by the genalloc API.
+
+  Each child of the sram node specifies a region of reserved memory. Each
+  child node should use a 'reg' property to specify a specific range of
+  reserved memory.
+
+  Following the generic-names recommended practice, node names should
+  reflect the purpose of the node. Unit address (@<address>) should be
+  appended to the name.
+
+properties:
+  $nodename:
+    pattern: "^sram(@.*)?"
+
+  compatible:
+    contains:
+      enum:
+        - mmio-sram
+        - atmel,sama5d2-securam
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description:
+      Should translate from local addresses within the sram to bus addresses.
+
+  no-memory-wc:
+    description:
+      The flag indicating, that SRAM memory region has not to be remapped
+      as write combining. WC is used by default.
+    type: boolean
+
+patternProperties:
+  "^([a-z]*-)?sram@[a-f0-9]$":
+    type: object
+    description:
+      Each child of the sram node specifies a region of reserved memory.
+    properties:
+      reg:
+        description:
+          IO mem address range, relative to the SRAM range.
+        maxItems: 1
+
+      compatible:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          Should contain a vendor specific string in the form
+          <vendor>,[<device>-]<usage>
+
+      pool:
+        description:
+          Indicates that the particular reserved SRAM area is addressable
+          and in use by another device or devices.
+        type: boolean
+
+      export:
+        description:
+          Indicates that the reserved SRAM area may be accessed outside
+          of the kernel, e.g. by bootloader or userspace.
+        type: boolean
+
+      protect-exec:
+        description: |
+          Same as 'pool' above but with the additional constraint that code
+          will be run from the region and that the memory is maintained as
+          read-only, executable during code execution. NOTE: This region must
+          be page aligned on start and end in order to properly allow
+          manipulation of the page attributes.
+        type: boolean
+
+      label:
+        description:
+          The name for the reserved partition, if omitted, the label is taken
+          from the node name excluding the unit address.
+
+      clocks:
+        description:
+          A list of phandle and clock specifier pair that controls the
+          single SRAM clock.
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+examples:
+  - |
+    sram: sram@5c000000 {
+        compatible = "mmio-sram";
+        reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x5c000000 0x40000>;
+
+        smp-sram@100 {
+            compatible = "socvendor,smp-sram";
+            reg = <0x100 0x50>;
+        };
+
+        device-sram@1000 {
+            reg = <0x1000 0x1000>;
+            pool;
+        };
+
+        exported@20000 {
+            reg = <0x20000 0x20000>;
+            export;
+        };
+    };