| Message ID | PSXP216MB01833367A1A154AEB816AE4E806B0@PSXP216MB0183.KORP216.PROD.OUTLOOK.COM (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Add support for setting MMIO PREF hotplug bridge size | expand |
On Wed, Oct 23, 2019 at 08:37:48AM +0000, Nicholas Johnson wrote: > } else if (!strncmp(str, "hpmemsize=", 10)) { > - pci_hotplug_mem_size = memparse(str + 10, &str); > + pci_hotplug_mmio_size = > + memparse(str + 10, &str); > + pci_hotplug_mmio_pref_size = > + memparse(str + 10, &str); Does this actually work correctly? The first memparse(str + 10, &str) modifies str so the next call will not start from the correct position anymore. Otherwise the patch looks good to me.
On Wed, Oct 23, 2019 at 12:47:43PM +0300, mika.westerberg@linux.intel.com wrote: > On Wed, Oct 23, 2019 at 08:37:48AM +0000, Nicholas Johnson wrote: > > } else if (!strncmp(str, "hpmemsize=", 10)) { > > - pci_hotplug_mem_size = memparse(str + 10, &str); > > + pci_hotplug_mmio_size = > > + memparse(str + 10, &str); > > + pci_hotplug_mmio_pref_size = > > + memparse(str + 10, &str); > > Does this actually work correctly? The first memparse(str + 10, &str) > modifies str so the next call will not start from the correct position > anymore. I have been using this for a long time now and have not had any issues. Does it modify str? I thought that was done by the loop. Can somebody else please weigh in here? I am worried now, and I want to be sure. If it is a problem, then I will have to read it into pci_hotplug_mmio_size and then set: pci_hotplug_mmio_pref_size = pci_hotplug_mmio_size > > Otherwise the patch looks good to me. Thanks, I will re-post with your last suggestions of going over 80 characters shortly.
On Wed, Oct 23, 2019 at 09:57:17AM +0000, Nicholas Johnson wrote: > On Wed, Oct 23, 2019 at 12:47:43PM +0300, mika.westerberg@linux.intel.com wrote: > > On Wed, Oct 23, 2019 at 08:37:48AM +0000, Nicholas Johnson wrote: > > > } else if (!strncmp(str, "hpmemsize=", 10)) { > > > - pci_hotplug_mem_size = memparse(str + 10, &str); > > > + pci_hotplug_mmio_size = > > > + memparse(str + 10, &str); > > > + pci_hotplug_mmio_pref_size = > > > + memparse(str + 10, &str); > > > > Does this actually work correctly? The first memparse(str + 10, &str) > > modifies str so the next call will not start from the correct position > > anymore. > I have been using this for a long time now and have not had any issues. > Does it modify str? I thought that was done by the loop. If you add "hpmemsize=xxx" in the command line and print both pci_hotplug_mmio_size and pci_hotplug_mmio_pref_size after the assignment, do they have the same value? If yes, then there is no problem. > Can somebody else please weigh in here? I am worried now, and I want to > be sure. If it is a problem, then I will have to read it into > pci_hotplug_mmio_size and then set: > > pci_hotplug_mmio_pref_size = pci_hotplug_mmio_size Yup.
On Wed, Oct 23, 2019 at 01:03:59PM +0300, mika.westerberg@linux.intel.com wrote: > On Wed, Oct 23, 2019 at 09:57:17AM +0000, Nicholas Johnson wrote: > > On Wed, Oct 23, 2019 at 12:47:43PM +0300, mika.westerberg@linux.intel.com wrote: > > > On Wed, Oct 23, 2019 at 08:37:48AM +0000, Nicholas Johnson wrote: > > > > } else if (!strncmp(str, "hpmemsize=", 10)) { > > > > - pci_hotplug_mem_size = memparse(str + 10, &str); > > > > + pci_hotplug_mmio_size = > > > > + memparse(str + 10, &str); > > > > + pci_hotplug_mmio_pref_size = > > > > + memparse(str + 10, &str); > > > > > > Does this actually work correctly? The first memparse(str + 10, &str) > > > modifies str so the next call will not start from the correct position > > > anymore. > > I have been using this for a long time now and have not had any issues. > > Does it modify str? I thought that was done by the loop. > > If you add "hpmemsize=xxx" in the command line and print both > pci_hotplug_mmio_size and pci_hotplug_mmio_pref_size after the > assignment, do they have the same value? If yes, then there is no > problem. Looking at lib/cmdline.c line 125, it looks like there is no point in me testing it. It looks like you are right. What is the better fix? pci_hotplug_mmio_size = pci_hotplug_mmio_pref_size = memparse(str + 10, &str); ^ Could be too long, even if we are ignoring the 80-character limit. > > > Can somebody else please weigh in here? I am worried now, and I want to > > be sure. If it is a problem, then I will have to read it into > > pci_hotplug_mmio_size and then set: > > > > pci_hotplug_mmio_pref_size = pci_hotplug_mmio_size > > Yup. Or do you prefer the above? Thanks
On Wed, Oct 23, 2019 at 10:33:42AM +0000, Nicholas Johnson wrote: > On Wed, Oct 23, 2019 at 01:03:59PM +0300, mika.westerberg@linux.intel.com wrote: > > On Wed, Oct 23, 2019 at 09:57:17AM +0000, Nicholas Johnson wrote: > > > On Wed, Oct 23, 2019 at 12:47:43PM +0300, mika.westerberg@linux.intel.com wrote: > > > > On Wed, Oct 23, 2019 at 08:37:48AM +0000, Nicholas Johnson wrote: > > > > > } else if (!strncmp(str, "hpmemsize=", 10)) { > > > > > - pci_hotplug_mem_size = memparse(str + 10, &str); > > > > > + pci_hotplug_mmio_size = > > > > > + memparse(str + 10, &str); > > > > > + pci_hotplug_mmio_pref_size = > > > > > + memparse(str + 10, &str); > > > > > > > > Does this actually work correctly? The first memparse(str + 10, &str) > > > > modifies str so the next call will not start from the correct position > > > > anymore. > > > I have been using this for a long time now and have not had any issues. > > > Does it modify str? I thought that was done by the loop. > > > > If you add "hpmemsize=xxx" in the command line and print both > > pci_hotplug_mmio_size and pci_hotplug_mmio_pref_size after the > > assignment, do they have the same value? If yes, then there is no > > problem. > Looking at lib/cmdline.c line 125, it looks like there is no point in me > testing it. It looks like you are right. > > What is the better fix? > > pci_hotplug_mmio_size = pci_hotplug_mmio_pref_size = memparse(str + 10, &str); > > ^ Could be too long, even if we are ignoring the 80-character limit. I prefer this: pci_hotplug_mmio_size = memparse(str + 10, &str); pci_hotplug_mmio_pref_size = pci_hotplug_mmio_size; And you can ignore the 80-char limit. The above is much more readable IMHO.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index a84a83f88..cfe8c2b67 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -3492,8 +3492,15 @@ hpiosize=nn[KMG] The fixed amount of bus space which is reserved for hotplug bridge's IO window. Default size is 256 bytes. + hpmmiosize=nn[KMG] The fixed amount of bus space which is + reserved for hotplug bridge's MMIO window. + Default size is 2 megabytes. + hpmmioprefsize=nn[KMG] The fixed amount of bus space which is + reserved for hotplug bridge's MMIO_PREF window. + Default size is 2 megabytes. hpmemsize=nn[KMG] The fixed amount of bus space which is - reserved for hotplug bridge's memory window. + reserved for hotplug bridge's MMIO and + MMIO_PREF window. Default size is 2 megabytes. hpbussize=nn The minimum amount of additional bus numbers reserved for buses below a hotplug bridge. diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index a97e2571a..f3adab84b 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -85,10 +85,12 @@ unsigned long pci_cardbus_io_size = DEFAULT_CARDBUS_IO_SIZE; unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE; #define DEFAULT_HOTPLUG_IO_SIZE (256) -#define DEFAULT_HOTPLUG_MEM_SIZE (2*1024*1024) +#define DEFAULT_HOTPLUG_MMIO_SIZE (2*1024*1024) +#define DEFAULT_HOTPLUG_MMIO_PREF_SIZE (2*1024*1024) /* pci=hpmemsize=nnM,hpiosize=nn can override this */ unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE; -unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE; +unsigned long pci_hotplug_mmio_size = DEFAULT_HOTPLUG_MMIO_SIZE; +unsigned long pci_hotplug_mmio_pref_size = DEFAULT_HOTPLUG_MMIO_PREF_SIZE; #define DEFAULT_HOTPLUG_BUS_SIZE 1 unsigned long pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE; @@ -6286,8 +6288,17 @@ static int __init pci_setup(char *str) pcie_ecrc_get_policy(str + 5); } else if (!strncmp(str, "hpiosize=", 9)) { pci_hotplug_io_size = memparse(str + 9, &str); + } else if (!strncmp(str, "hpmmiosize=", 11)) { + pci_hotplug_mmio_size = + memparse(str + 11, &str); + } else if (!strncmp(str, "hpmmioprefsize=", 15)) { + pci_hotplug_mmio_pref_size = + memparse(str + 15, &str); } else if (!strncmp(str, "hpmemsize=", 10)) { - pci_hotplug_mem_size = memparse(str + 10, &str); + pci_hotplug_mmio_size = + memparse(str + 10, &str); + pci_hotplug_mmio_pref_size = + memparse(str + 10, &str); } else if (!strncmp(str, "hpbussize=", 10)) { pci_hotplug_bus_size = simple_strtoul(str + 10, &str, 0); diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 3f6947ee3..9faa55a15 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -218,7 +218,8 @@ extern const struct device_type pci_dev_type; extern const struct attribute_group *pci_bus_groups[]; extern unsigned long pci_hotplug_io_size; -extern unsigned long pci_hotplug_mem_size; +extern unsigned long pci_hotplug_mmio_size; +extern unsigned long pci_hotplug_mmio_pref_size; extern unsigned long pci_hotplug_bus_size; /** diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index e7dbe2170..24fc4c715 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1178,7 +1178,8 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head) { struct pci_dev *dev; unsigned long mask, prefmask, type2 = 0, type3 = 0; - resource_size_t additional_mem_size = 0, additional_io_size = 0; + resource_size_t additional_io_size = 0, additional_mmio_size = 0, + additional_mmio_pref_size = 0; struct resource *b_res; int ret; @@ -1212,7 +1213,8 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head) pci_bridge_check_ranges(bus); if (bus->self->is_hotplug_bridge) { additional_io_size = pci_hotplug_io_size; - additional_mem_size = pci_hotplug_mem_size; + additional_mmio_size = pci_hotplug_mmio_size; + additional_mmio_pref_size = pci_hotplug_mmio_pref_size; } /* Fall through */ default: @@ -1230,9 +1232,9 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head) if (b_res[2].flags & IORESOURCE_MEM_64) { prefmask |= IORESOURCE_MEM_64; ret = pbus_size_mem(bus, prefmask, prefmask, - prefmask, prefmask, - realloc_head ? 0 : additional_mem_size, - additional_mem_size, realloc_head); + prefmask, prefmask, + realloc_head ? 0 : additional_mmio_pref_size, + additional_mmio_pref_size, realloc_head); /* * If successful, all non-prefetchable resources @@ -1254,9 +1256,9 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head) if (!type2) { prefmask &= ~IORESOURCE_MEM_64; ret = pbus_size_mem(bus, prefmask, prefmask, - prefmask, prefmask, - realloc_head ? 0 : additional_mem_size, - additional_mem_size, realloc_head); + prefmask, prefmask, + realloc_head ? 0 : additional_mmio_pref_size, + additional_mmio_pref_size, realloc_head); /* * If successful, only non-prefetchable resources @@ -1265,7 +1267,8 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head) if (ret == 0) mask = prefmask; else - additional_mem_size += additional_mem_size; + additional_mmio_size += + additional_mmio_pref_size; type2 = type3 = IORESOURCE_MEM; } @@ -1285,8 +1288,8 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head) * prefetchable resource in a 64-bit prefetchable window. */ pbus_size_mem(bus, mask, IORESOURCE_MEM, type2, type3, - realloc_head ? 0 : additional_mem_size, - additional_mem_size, realloc_head); + realloc_head ? 0 : additional_mmio_size, + additional_mmio_size, realloc_head); break; } }
Add kernel parameter pci=hpmmiosize=nn[KMG] to set MMIO bridge window size for hotplug bridges. Add kernel parameter pci=hpmmioprefsize=nn[KMG] to set MMIO_PREF bridge window size for hotplug bridges. Leave pci=hpmemsize=nn[KMG] unchanged, to prevent disruptions to existing users. This sets both MMIO and MMIO_PREF to the same size. The two new parameters conform to the style of pci=hpiosize=nn[KMG]. Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> --- .../admin-guide/kernel-parameters.txt | 9 ++++++- drivers/pci/pci.c | 17 ++++++++++--- drivers/pci/pci.h | 3 ++- drivers/pci/setup-bus.c | 25 +++++++++++-------- 4 files changed, 38 insertions(+), 16 deletions(-)