[v4,1/3] dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller

Commit Message

Dilip Kota Oct. 21, 2019, 6:39 a.m. UTC

Add YAML shcemas for PCIe RC controller on Intel Gateway SoCs
which is Synopsys DesignWare based PCIe core.

changes on v4:
	Add "snps,dw-pcie" compatible.
	Rename phy-names property value to pcie.
	And maximum and minimum values to num-lanes.
	Add ref for reset-assert-ms entry and update the
	 description for easy understanding.
	Remove pcie core interrupt entry.

changes on v3:
        Add the appropriate License-Identifier
        Rename intel,rst-interval to 'reset-assert-us'
        Add additionalProperties: false
        Rename phy-names to 'pciephy'
        Remove the dtsi node split of SoC and board in the example
        Add #interrupt-cells = <1>; or else interrupt parsing will fail
        Name yaml file with compatible name

Signed-off-by: Dilip Kota <[e-mail]>
---
 .../devicetree/bindings/pci/intel-gw-pcie.yaml     | 135 +++++++++++++++++++++
 1 file changed, 135 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml

Comments

Andrew Murray Oct. 21, 2019, 11:19 a.m. UTC | #1

On Mon, Oct 21, 2019 at 02:39:18PM +0800, Dilip Kota wrote:
> Add YAML shcemas for PCIe RC controller on Intel Gateway SoCs

s/shcemas/schemas/

> which is Synopsys DesignWare based PCIe core.

The revision history below doesn't need to be in the commit mesage and
so you should add a '---' before the following (and thanks for the
detailed history).

Besides that:

Reviewed-by: Andrew Murray <[e-mail]>

> 
> changes on v4:
> 	Add "snps,dw-pcie" compatible.
> 	Rename phy-names property value to pcie.
> 	And maximum and minimum values to num-lanes.
> 	Add ref for reset-assert-ms entry and update the
> 	 description for easy understanding.
> 	Remove pcie core interrupt entry.
> 
> changes on v3:
>         Add the appropriate License-Identifier
>         Rename intel,rst-interval to 'reset-assert-us'
>         Add additionalProperties: false
>         Rename phy-names to 'pciephy'
>         Remove the dtsi node split of SoC and board in the example
>         Add #interrupt-cells = <1>; or else interrupt parsing will fail
>         Name yaml file with compatible name
> 
> Signed-off-by: Dilip Kota <[e-mail]>
> ---
>  .../devicetree/bindings/pci/intel-gw-pcie.yaml     | 135 +++++++++++++++++++++
>  1 file changed, 135 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
> new file mode 100644
> index 000000000000..49dd87ec1e3d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
> @@ -0,0 +1,135 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: PCIe RC controller on Intel Gateway SoCs
> +
> +maintainers:
> +  - Dilip Kota <[e-mail]>
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: intel,lgm-pcie
> +      - const: snps,dw-pcie
> +
> +  device_type:
> +    const: pci
> +
> +  "#address-cells":
> +    const: 3
> +
> +  "#size-cells":
> +    const: 2
> +
> +  reg:
> +    items:
> +      - description: Controller control and status registers.
> +      - description: PCIe configuration registers.
> +      - description: Controller application registers.
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: config
> +      - const: app
> +
> +  ranges:
> +    description: Ranges for the PCI memory and I/O regions.
> +
> +  resets:
> +    maxItems: 1
> +
> +  clocks:
> +    description: PCIe registers interface clock.
> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    const: pcie
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  num-lanes:
> +    minimum: 1
> +    maximum: 2
> +    description: Number of lanes to use for this port.
> +
> +  linux,pci-domain:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: PCI domain ID.
> +
> +  '#interrupt-cells':
> +    const: 1
> +
> +  interrupt-map-mask:
> +    description: Standard PCI IRQ mapping properties.
> +
> +  interrupt-map:
> +    description: Standard PCI IRQ mapping properties.
> +
> +  max-link-speed:
> +    description: Specify PCI Gen for link capability.
> +
> +  bus-range:
> +    description: Range of bus numbers associated with this controller.
> +
> +  reset-assert-ms:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      Delay after asserting reset to the PCIe device.
> +      Some devices need an interval upto 500ms. By default it is 100ms.
> +
> +required:
> +  - compatible
> +  - device_type
> +  - reg
> +  - reg-names
> +  - ranges
> +  - resets
> +  - clocks
> +  - phys
> +  - phy-names
> +  - reset-gpios
> +  - num-lanes
> +  - linux,pci-domain
> +  - interrupt-map
> +  - interrupt-map-mask
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pcie10:pcie@d0e00000 {
> +      compatible = "intel,lgm-pcie", "snps,dw-pcie";
> +      device_type = "pci";
> +      #address-cells = <3>;
> +      #size-cells = <2>;
> +      reg = <0xd0e00000 0x1000>,
> +            <0xd2000000 0x800000>,
> +            <0xd0a41000 0x1000>;
> +      reg-names = "dbi", "config", "app";
> +      linux,pci-domain = <0>;
> +      max-link-speed = <4>;
> +      bus-range = <0x00 0x08>;
> +      interrupt-parent = <&ioapic1>;
> +      #interrupt-cells = <1>;
> +      interrupt-map-mask = <0 0 0 0x7>;
> +      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
> +                      <0 0 0 2 &ioapic1 28 1>,
> +                      <0 0 0 3 &ioapic1 29 1>,
> +                      <0 0 0 4 &ioapic1 30 1>;
> +      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
> +      resets = <&rcu0 0x50 0>;
> +      clocks = <&cgu0 LGM_GCLK_PCIE10>;
> +      phys = <&cb0phy0>;
> +      phy-names = "pcie";
> +      status = "okay";
> +      reset-assert-ms = <500>;
> +      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
> +      num-lanes = <2>;
> +    };
> -- 
> 2.11.0
>

Dilip Kota Oct. 22, 2019, 10:15 a.m. UTC | #2

Hi Andrew Murray,

On 10/21/2019 7:19 PM, Andrew Murray wrote:
> On Mon, Oct 21, 2019 at 02:39:18PM +0800, Dilip Kota wrote:
>> Add YAML shcemas for PCIe RC controller on Intel Gateway SoCs
> s/shcemas/schemas/
>
>> which is Synopsys DesignWare based PCIe core.
> The revision history below doesn't need to be in the commit mesage and
> so you should add a '---' before the following (and thanks for the
> detailed history).
>
> Besides that:
>
> Reviewed-by: Andrew Murray <[e-mail]>

Thank you for the review. I will fix the conventions

Regards,
Dilip

>
>> changes on v4:
>> 	Add "snps,dw-pcie" compatible.
>> 	Rename phy-names property value to pcie.
>> 	And maximum and minimum values to num-lanes.
>> 	Add ref for reset-assert-ms entry and update the
>> 	 description for easy understanding.
>> 	Remove pcie core interrupt entry.
>>
>> changes on v3:
>>          Add the appropriate License-Identifier
>>          Rename intel,rst-interval to 'reset-assert-us'
>>          Add additionalProperties: false
>>          Rename phy-names to 'pciephy'
>>          Remove the dtsi node split of SoC and board in the example
>>          Add #interrupt-cells = <1>; or else interrupt parsing will fail
>>          Name yaml file with compatible name
>>
>> Signed-off-by: Dilip Kota <[e-mail]>
>> ---
>>   .../devicetree/bindings/pci/intel-gw-pcie.yaml     | 135 +++++++++++++++++++++
>>   1 file changed, 135 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
>> new file mode 100644
>> index 000000000000..49dd87ec1e3d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
>> @@ -0,0 +1,135 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: PCIe RC controller on Intel Gateway SoCs
>> +
>> +maintainers:
>> +  - Dilip Kota <[e-mail]>
>> +
>> +properties:
>> +  compatible:
>> +    items:
>> +      - const: intel,lgm-pcie
>> +      - const: snps,dw-pcie
>> +
>> +  device_type:
>> +    const: pci
>> +
>> +  "#address-cells":
>> +    const: 3
>> +
>> +  "#size-cells":
>> +    const: 2
>> +
>> +  reg:
>> +    items:
>> +      - description: Controller control and status registers.
>> +      - description: PCIe configuration registers.
>> +      - description: Controller application registers.
>> +
>> +  reg-names:
>> +    items:
>> +      - const: dbi
>> +      - const: config
>> +      - const: app
>> +
>> +  ranges:
>> +    description: Ranges for the PCI memory and I/O regions.
>> +
>> +  resets:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    description: PCIe registers interface clock.
>> +
>> +  phys:
>> +    maxItems: 1
>> +
>> +  phy-names:
>> +    const: pcie
>> +
>> +  reset-gpios:
>> +    maxItems: 1
>> +
>> +  num-lanes:
>> +    minimum: 1
>> +    maximum: 2
>> +    description: Number of lanes to use for this port.
>> +
>> +  linux,pci-domain:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description: PCI domain ID.
>> +
>> +  '#interrupt-cells':
>> +    const: 1
>> +
>> +  interrupt-map-mask:
>> +    description: Standard PCI IRQ mapping properties.
>> +
>> +  interrupt-map:
>> +    description: Standard PCI IRQ mapping properties.
>> +
>> +  max-link-speed:
>> +    description: Specify PCI Gen for link capability.
>> +
>> +  bus-range:
>> +    description: Range of bus numbers associated with this controller.
>> +
>> +  reset-assert-ms:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description: |
>> +      Delay after asserting reset to the PCIe device.
>> +      Some devices need an interval upto 500ms. By default it is 100ms.
>> +
>> +required:
>> +  - compatible
>> +  - device_type
>> +  - reg
>> +  - reg-names
>> +  - ranges
>> +  - resets
>> +  - clocks
>> +  - phys
>> +  - phy-names
>> +  - reset-gpios
>> +  - num-lanes
>> +  - linux,pci-domain
>> +  - interrupt-map
>> +  - interrupt-map-mask
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    pcie10:pcie@d0e00000 {
>> +      compatible = "intel,lgm-pcie", "snps,dw-pcie";
>> +      device_type = "pci";
>> +      #address-cells = <3>;
>> +      #size-cells = <2>;
>> +      reg = <0xd0e00000 0x1000>,
>> +            <0xd2000000 0x800000>,
>> +            <0xd0a41000 0x1000>;
>> +      reg-names = "dbi", "config", "app";
>> +      linux,pci-domain = <0>;
>> +      max-link-speed = <4>;
>> +      bus-range = <0x00 0x08>;
>> +      interrupt-parent = <&ioapic1>;
>> +      #interrupt-cells = <1>;
>> +      interrupt-map-mask = <0 0 0 0x7>;
>> +      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
>> +                      <0 0 0 2 &ioapic1 28 1>,
>> +                      <0 0 0 3 &ioapic1 29 1>,
>> +                      <0 0 0 4 &ioapic1 30 1>;
>> +      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
>> +      resets = <&rcu0 0x50 0>;
>> +      clocks = <&cgu0 LGM_GCLK_PCIE10>;
>> +      phys = <&cb0phy0>;
>> +      phy-names = "pcie";
>> +      status = "okay";
>> +      reset-assert-ms = <500>;
>> +      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
>> +      num-lanes = <2>;
>> +    };
>> -- 
>> 2.11.0
>>

Martin Blumenstingl Oct. 24, 2019, 8:31 p.m. UTC | #3

Hi Dilip,

thank you for the update
two nit-picks below, apart from those it looks good to me

On Mon, Oct 21, 2019 at 8:39 AM Dilip Kota <[e-mail]> wrote:
[...]
> +examples:
> +  - |
> +    pcie10:pcie@d0e00000 {
why no space between pcie10 and pcie@d0e00000?

[...]
> +      status = "okay";
examples should not use the status property, see commit 4da722ca19f30f
("dt-bindings: Remove "status" from examples")


Martin

Rob Herring (Arm) Oct. 25, 2019, 4:53 p.m. UTC | #4

On Mon, Oct 21, 2019 at 02:39:18PM +0800, Dilip Kota wrote:
> Add YAML shcemas for PCIe RC controller on Intel Gateway SoCs
> which is Synopsys DesignWare based PCIe core.
> 
> changes on v4:
> 	Add "snps,dw-pcie" compatible.
> 	Rename phy-names property value to pcie.
> 	And maximum and minimum values to num-lanes.
> 	Add ref for reset-assert-ms entry and update the
> 	 description for easy understanding.
> 	Remove pcie core interrupt entry.
> 
> changes on v3:
>         Add the appropriate License-Identifier
>         Rename intel,rst-interval to 'reset-assert-us'
>         Add additionalProperties: false
>         Rename phy-names to 'pciephy'
>         Remove the dtsi node split of SoC and board in the example
>         Add #interrupt-cells = <1>; or else interrupt parsing will fail
>         Name yaml file with compatible name
> 
> Signed-off-by: Dilip Kota <[e-mail]>
> ---
>  .../devicetree/bindings/pci/intel-gw-pcie.yaml     | 135 +++++++++++++++++++++
>  1 file changed, 135 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml

Fails to validate:

Error: Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dts:38.27-28 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:321: recipe for target 'Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dt.yaml' failed

Please run 'make -k dt_binding_check' (-k because there are some 
unrelated failures).

> 
> diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
> new file mode 100644
> index 000000000000..49dd87ec1e3d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
> @@ -0,0 +1,135 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: PCIe RC controller on Intel Gateway SoCs
> +
> +maintainers:
> +  - Dilip Kota <[e-mail]>
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: intel,lgm-pcie
> +      - const: snps,dw-pcie
> +
> +  device_type:
> +    const: pci
> +
> +  "#address-cells":
> +    const: 3
> +
> +  "#size-cells":
> +    const: 2
> +
> +  reg:
> +    items:
> +      - description: Controller control and status registers.
> +      - description: PCIe configuration registers.
> +      - description: Controller application registers.
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: config
> +      - const: app
> +
> +  ranges:
> +    description: Ranges for the PCI memory and I/O regions.

How many entries do you expect? Add a 'maxItems' to define.

> +
> +  resets:
> +    maxItems: 1
> +
> +  clocks:
> +    description: PCIe registers interface clock.

How many clocks?

> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    const: pcie
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  num-lanes:
> +    minimum: 1
> +    maximum: 2
> +    description: Number of lanes to use for this port.
> +
> +  linux,pci-domain:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: PCI domain ID.

Just a value of 'true' is fine here.

> +
> +  '#interrupt-cells':
> +    const: 1
> +
> +  interrupt-map-mask:
> +    description: Standard PCI IRQ mapping properties.
> +
> +  interrupt-map:
> +    description: Standard PCI IRQ mapping properties.
> +
> +  max-link-speed:
> +    description: Specify PCI Gen for link capability.

Allowed values? Default?

> +
> +  bus-range:
> +    description: Range of bus numbers associated with this controller.
> +
> +  reset-assert-ms:
> +    $ref: /schemas/types.yaml#/definitions/uint32

Don't need a type for standard units.

> +    description: |
> +      Delay after asserting reset to the PCIe device.
> +      Some devices need an interval upto 500ms. By default it is 100ms.

Express as a schema:

maximum: 500
default: 100

> +
> +required:
> +  - compatible
> +  - device_type
> +  - reg
> +  - reg-names
> +  - ranges
> +  - resets
> +  - clocks
> +  - phys
> +  - phy-names
> +  - reset-gpios
> +  - num-lanes

Shouldn't be required. It should have a default.

> +  - linux,pci-domain

Is this really required? AIUI, domains are optional and only used if 
you have more than one host.

> +  - interrupt-map
> +  - interrupt-map-mask
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pcie10:pcie@d0e00000 {

space         ^

> +      compatible = "intel,lgm-pcie", "snps,dw-pcie";
> +      device_type = "pci";
> +      #address-cells = <3>;
> +      #size-cells = <2>;
> +      reg = <0xd0e00000 0x1000>,
> +            <0xd2000000 0x800000>,
> +            <0xd0a41000 0x1000>;
> +      reg-names = "dbi", "config", "app";
> +      linux,pci-domain = <0>;
> +      max-link-speed = <4>;
> +      bus-range = <0x00 0x08>;
> +      interrupt-parent = <&ioapic1>;
> +      #interrupt-cells = <1>;
> +      interrupt-map-mask = <0 0 0 0x7>;
> +      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
> +                      <0 0 0 2 &ioapic1 28 1>,
> +                      <0 0 0 3 &ioapic1 29 1>,
> +                      <0 0 0 4 &ioapic1 30 1>;
> +      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
> +      resets = <&rcu0 0x50 0>;
> +      clocks = <&cgu0 LGM_GCLK_PCIE10>;

You need to include any defines you use. That's why the example fails to 
build.

> +      phys = <&cb0phy0>;
> +      phy-names = "pcie";
> +      status = "okay";

Don't show status in examples.

> +      reset-assert-ms = <500>;
> +      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
> +      num-lanes = <2>;
> +    };
> -- 
> 2.11.0
>

Dilip Kota Oct. 29, 2019, 7:53 a.m. UTC | #5

Hi Martin,

On 10/25/2019 4:31 AM, Martin Blumenstingl wrote:
> Hi Dilip,
>
> thank you for the update
> two nit-picks below, apart from those it looks good to me
Thanks for reviewing it.
>
> On Mon, Oct 21, 2019 at 8:39 AM Dilip Kota <[e-mail]> wrote:
> [...]
>> +examples:
>> +  - |
>> +    pcie10:pcie@d0e00000 {
> why no space between pcie10 and pcie@d0e00000?
Agree, will fix it in the next patch version.
>
> [...]
>> +      status = "okay";
> examples should not use the status property, see commit 4da722ca19f30f
> ("dt-bindings: Remove "status" from examples")

Agree, will fix it in the next patch version.
(sorry for the late reply, i am back today from sick leave).

Regards,
Dilip

>
>
> Martin

Dilip Kota Oct. 29, 2019, 8:34 a.m. UTC | #6

On 10/26/2019 12:53 AM, Rob Herring wrote:
> On Mon, Oct 21, 2019 at 02:39:18PM +0800, Dilip Kota wrote:
>> Add YAML shcemas for PCIe RC controller on Intel Gateway SoCs
>> which is Synopsys DesignWare based PCIe core.
>>
>> changes on v4:
>> 	Add "snps,dw-pcie" compatible.
>> 	Rename phy-names property value to pcie.
>> 	And maximum and minimum values to num-lanes.
>> 	Add ref for reset-assert-ms entry and update the
>> 	 description for easy understanding.
>> 	Remove pcie core interrupt entry.
>>
>> changes on v3:
>>          Add the appropriate License-Identifier
>>          Rename intel,rst-interval to 'reset-assert-us'
>>          Add additionalProperties: false
>>          Rename phy-names to 'pciephy'
>>          Remove the dtsi node split of SoC and board in the example
>>          Add #interrupt-cells = <1>; or else interrupt parsing will fail
>>          Name yaml file with compatible name
>>
>> Signed-off-by: Dilip Kota <[e-mail]>
>> ---
>>   .../devicetree/bindings/pci/intel-gw-pcie.yaml     | 135 +++++++++++++++++++++
>>   1 file changed, 135 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
> Fails to validate:
>
> Error: Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dts:38.27-28 syntax error
> FATAL ERROR: Unable to parse input tree
> scripts/Makefile.lib:321: recipe for target 'Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dt.yaml' failed
>
> Please run 'make -k dt_binding_check' (-k because there are some
> unrelated failures).
>
>> diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
>> new file mode 100644
>> index 000000000000..49dd87ec1e3d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
>> @@ -0,0 +1,135 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: PCIe RC controller on Intel Gateway SoCs
>> +
>> +maintainers:
>> +  - Dilip Kota <[e-mail]>
>> +
>> +properties:
>> +  compatible:
>> +    items:
>> +      - const: intel,lgm-pcie
>> +      - const: snps,dw-pcie
>> +
>> +  device_type:
>> +    const: pci
>> +
>> +  "#address-cells":
>> +    const: 3
>> +
>> +  "#size-cells":
>> +    const: 2
>> +
>> +  reg:
>> +    items:
>> +      - description: Controller control and status registers.
>> +      - description: PCIe configuration registers.
>> +      - description: Controller application registers.
>> +
>> +  reg-names:
>> +    items:
>> +      - const: dbi
>> +      - const: config
>> +      - const: app
>> +
>> +  ranges:
>> +    description: Ranges for the PCI memory and I/O regions.
> How many entries do you expect? Add a 'maxItems' to define.
Agree will add it.
>
>> +
>> +  resets:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    description: PCIe registers interface clock.
> How many clocks?
One. I will mention maxItems: 1
>
>> +
>> +  phys:
>> +    maxItems: 1
>> +
>> +  phy-names:
>> +    const: pcie
>> +
>> +  reset-gpios:
>> +    maxItems: 1
>> +
>> +  num-lanes:
>> +    minimum: 1
>> +    maximum: 2
>> +    description: Number of lanes to use for this port.
>> +
>> +  linux,pci-domain:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description: PCI domain ID.
> Just a value of 'true' is fine here.
Ok.
>
>> +
>> +  '#interrupt-cells':
>> +    const: 1
>> +
>> +  interrupt-map-mask:
>> +    description: Standard PCI IRQ mapping properties.
>> +
>> +  interrupt-map:
>> +    description: Standard PCI IRQ mapping properties.
>> +
>> +  max-link-speed:
>> +    description: Specify PCI Gen for link capability.
> Allowed values? Default?
Sure, will add it.
>
>> +
>> +  bus-range:
>> +    description: Range of bus numbers associated with this controller.
>> +
>> +  reset-assert-ms:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
> Don't need a type for standard units.
Ok.
>
>> +    description: |
>> +      Delay after asserting reset to the PCIe device.
>> +      Some devices need an interval upto 500ms. By default it is 100ms.
> Express as a schema:
>
> maximum: 500
> default: 100
Sure i will update it.
>
>> +
>> +required:
>> +  - compatible
>> +  - device_type
>> +  - reg
>> +  - reg-names
>> +  - ranges
>> +  - resets
>> +  - clocks
>> +  - phys
>> +  - phy-names
>> +  - reset-gpios
>> +  - num-lanes
> Shouldn't be required. It should have a default.
Agree, will fix it.
>
>> +  - linux,pci-domain
> Is this really required? AIUI, domains are optional and only used if
> you have more than one host.
Yes, not required. I will update,
>
>> +  - interrupt-map
>> +  - interrupt-map-mask
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    pcie10:pcie@d0e00000 {
> space         ^
Agree, i will fix it.
>
>> +      compatible = "intel,lgm-pcie", "snps,dw-pcie";
>> +      device_type = "pci";
>> +      #address-cells = <3>;
>> +      #size-cells = <2>;
>> +      reg = <0xd0e00000 0x1000>,
>> +            <0xd2000000 0x800000>,
>> +            <0xd0a41000 0x1000>;
>> +      reg-names = "dbi", "config", "app";
>> +      linux,pci-domain = <0>;
>> +      max-link-speed = <4>;
>> +      bus-range = <0x00 0x08>;
>> +      interrupt-parent = <&ioapic1>;
>> +      #interrupt-cells = <1>;
>> +      interrupt-map-mask = <0 0 0 0x7>;
>> +      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
>> +                      <0 0 0 2 &ioapic1 28 1>,
>> +                      <0 0 0 3 &ioapic1 29 1>,
>> +                      <0 0 0 4 &ioapic1 30 1>;
>> +      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
>> +      resets = <&rcu0 0x50 0>;
>> +      clocks = <&cgu0 LGM_GCLK_PCIE10>;
> You need to include any defines you use. That's why the example fails to
> build.
Yes, i will add it.
>
>> +      phys = <&cb0phy0>;
>> +      phy-names = "pcie";
>> +      status = "okay";
> Don't show status in examples.
OK, will fix it.

Thanks for reviewing it.

Regards,
Dilip
>
>> +      reset-assert-ms = <500>;
>> +      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
>> +      num-lanes = <2>;
>> +    };
>> -- 
>> 2.11.0
>>

Dilip Kota Oct. 31, 2019, 10:51 a.m. UTC | #7

On 10/29/2019 4:34 PM, Dilip Kota wrote:
>
> On 10/26/2019 12:53 AM, Rob Herring wrote:
>> On Mon, Oct 21, 2019 at 02:39:18PM +0800, Dilip Kota wrote:
>>> Add YAML shcemas for PCIe RC controller on Intel Gateway SoCs
>>> which is Synopsys DesignWare based PCIe core.
>>>
[...]
>>>
>>
>> +
>> +  linux,pci-domain:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description: PCI domain ID.
>> Just a value of 'true' is fine here.
> Ok.
dt_binding_check is failing for adding 'true' alone.
It is passing only if "$ref" is mentioned.

Regards,
Dilip

Rob Herring (Arm) Oct. 31, 2019, 6:35 p.m. UTC | #8

On Thu, Oct 31, 2019 at 5:51 AM Dilip Kota <[e-mail]> wrote:
>
>
> On 10/29/2019 4:34 PM, Dilip Kota wrote:
> >
> > On 10/26/2019 12:53 AM, Rob Herring wrote:
> >> On Mon, Oct 21, 2019 at 02:39:18PM +0800, Dilip Kota wrote:
> >>> Add YAML shcemas for PCIe RC controller on Intel Gateway SoCs
> >>> which is Synopsys DesignWare based PCIe core.
> >>>
> [...]
> >>>
> >>
> >> +
> >> +  linux,pci-domain:
> >> +    $ref: /schemas/types.yaml#/definitions/uint32
> >> +    description: PCI domain ID.
> >> Just a value of 'true' is fine here.
> > Ok.
> dt_binding_check is failing for adding 'true' alone.
> It is passing only if "$ref" is mentioned.

Update dtschema. That should be fixed.

Rob

Patch

diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
new file mode 100644
index 000000000000..49dd87ec1e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
@@ -0,0 +1,135 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCIe RC controller on Intel Gateway SoCs
+
+maintainers:
+  - Dilip Kota <[e-mail]>
+
+properties:
+  compatible:
+    items:
+      - const: intel,lgm-pcie
+      - const: snps,dw-pcie
+
+  device_type:
+    const: pci
+
+  "#address-cells":
+    const: 3
+
+  "#size-cells":
+    const: 2
+
+  reg:
+    items:
+      - description: Controller control and status registers.
+      - description: PCIe configuration registers.
+      - description: Controller application registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: app
+
+  ranges:
+    description: Ranges for the PCI memory and I/O regions.
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    description: PCIe registers interface clock.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+  reset-gpios:
+    maxItems: 1
+
+  num-lanes:
+    minimum: 1
+    maximum: 2
+    description: Number of lanes to use for this port.
+
+  linux,pci-domain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: PCI domain ID.
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-map-mask:
+    description: Standard PCI IRQ mapping properties.
+
+  interrupt-map:
+    description: Standard PCI IRQ mapping properties.
+
+  max-link-speed:
+    description: Specify PCI Gen for link capability.
+
+  bus-range:
+    description: Range of bus numbers associated with this controller.
+
+  reset-assert-ms:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Delay after asserting reset to the PCIe device.
+      Some devices need an interval upto 500ms. By default it is 100ms.
+
+required:
+  - compatible
+  - device_type
+  - reg
+  - reg-names
+  - ranges
+  - resets
+  - clocks
+  - phys
+  - phy-names
+  - reset-gpios
+  - num-lanes
+  - linux,pci-domain
+  - interrupt-map
+  - interrupt-map-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie10:pcie@d0e00000 {
+      compatible = "intel,lgm-pcie", "snps,dw-pcie";
+      device_type = "pci";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <0xd0e00000 0x1000>,
+            <0xd2000000 0x800000>,
+            <0xd0a41000 0x1000>;
+      reg-names = "dbi", "config", "app";
+      linux,pci-domain = <0>;
+      max-link-speed = <4>;
+      bus-range = <0x00 0x08>;
+      interrupt-parent = <&ioapic1>;
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
+                      <0 0 0 2 &ioapic1 28 1>,
+                      <0 0 0 3 &ioapic1 29 1>,
+                      <0 0 0 4 &ioapic1 30 1>;
+      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
+      resets = <&rcu0 0x50 0>;
+      clocks = <&cgu0 LGM_GCLK_PCIE10>;
+      phys = <&cb0phy0>;
+      phy-names = "pcie";
+      status = "okay";
+      reset-assert-ms = <500>;
+      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+      num-lanes = <2>;
+    };