| Message ID | 20191112142753.22976-6-bparrot@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: dra7: add cal nodes | expand |
* Benoit Parrot <bparrot@ti.com> [191112 14:25]: > This patch adds the required dtsi node to support the Camera > Adaptation Layer (CAL) for the DRA72 family of devices. > > Signed-off-by: Benoit Parrot <bparrot@ti.com> > --- > arch/arm/boot/dts/dra72x.dtsi | 43 +++++++++++++++++++++++++++++++++++ > 1 file changed, 43 insertions(+) > > diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi > index f5762709c853..726e46ae887d 100644 > --- a/arch/arm/boot/dts/dra72x.dtsi > +++ b/arch/arm/boot/dts/dra72x.dtsi > @@ -17,6 +17,49 @@ > }; > }; > > +&l4_per2 { > + target-module@5b000 { /* 0x4845b000, ap 59 46.0 */ > + compatible = "ti,sysc-omap4", "ti,sysc"; > + reg = <0x5b000 0x4>, > + <0x5b010 0x4>; > + reg-names = "rev", "sysc"; > + ti,sysc-midle = <SYSC_IDLE_FORCE>, > + <SYSC_IDLE_NO>; > + ti,sysc-sidle = <SYSC_IDLE_FORCE>, > + <SYSC_IDLE_NO>; > + clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>; > + clock-names = "fck"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x5b000 0x1000>; > + > + cal: cal@0 { > + compatible = "ti,dra72-cal"; > + reg = <0x0000 0x400>, > + <0x0800 0x40>, > + <0x0900 0x40>; > + reg-names = "cal_top", > + "cal_rx_core0", > + "cal_rx_core1"; > + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; > + ti,camerrx-control = <&scm_conf 0xE94>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + csi2_0: port@0 { > + reg = <0>; > + }; > + csi2_1: port@1 { > + reg = <1>; > + }; > + }; > + }; > + }; > +}; Just leave out the status = "disabled" here for the SoC specific dtsi files. The SoC internal device is there for sure, even if not pinned out. And the dts default value is status = "okay". Regards, Tony
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index f5762709c853..726e46ae887d 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -17,6 +17,49 @@ }; }; +&l4_per2 { + target-module@5b000 { /* 0x4845b000, ap 59 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5b000 0x4>, + <0x5b010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + cal: cal@0 { + compatible = "ti,dra72-cal"; + reg = <0x0000 0x400>, + <0x0800 0x40>, + <0x0900 0x40>; + reg-names = "cal_top", + "cal_rx_core0", + "cal_rx_core1"; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + ti,camerrx-control = <&scm_conf 0xE94>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + csi2_1: port@1 { + reg = <1>; + }; + }; + }; + }; +}; + &dss { reg = <0x58000000 0x80>, <0x58004054 0x4>,
This patch adds the required dtsi node to support the Camera Adaptation Layer (CAL) for the DRA72 family of devices. Signed-off-by: Benoit Parrot <bparrot@ti.com> --- arch/arm/boot/dts/dra72x.dtsi | 43 +++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)