diff mbox series

[v4,01/13] dt-bindings: display: bridge: Convert lvds-transmitter binding to json-schema

Message ID 1573660292-10629-2-git-send-email-fabrizio.castro@bp.renesas.com (mailing list archive)
State New
Delegated to: Kieran Bingham
Headers show
Series Add LCD panel support to iwg20d | expand

Commit Message

Fabrizio Castro Nov. 13, 2019, 3:51 p.m. UTC
Convert the lvds-transmitter binding to DT schema format using
json-schema.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

---
v3->v4:
* Fixed the description of property "compatible" according to Laurent's
  comments
v2->v3:
* Extracted conversion to dt-schema as per Rob's comment
v1->v2:
* Converted to dt-schema as per Neil's comment
---
 .../bindings/display/bridge/lvds-transmitter.txt   | 66 ----------------
 .../bindings/display/bridge/lvds-transmitter.yaml  | 91 ++++++++++++++++++++++
 2 files changed, 91 insertions(+), 66 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
 create mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml

Comments

Rob Herring (Arm) Nov. 18, 2019, 9:35 p.m. UTC | #1
On Wed, 13 Nov 2019 15:51:20 +0000, Fabrizio Castro wrote:
> Convert the lvds-transmitter binding to DT schema format using
> json-schema.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> 
> ---
> v3->v4:
> * Fixed the description of property "compatible" according to Laurent's
>   comments
> v2->v3:
> * Extracted conversion to dt-schema as per Rob's comment
> v1->v2:
> * Converted to dt-schema as per Neil's comment
> ---
>  .../bindings/display/bridge/lvds-transmitter.txt   | 66 ----------------
>  .../bindings/display/bridge/lvds-transmitter.yaml  | 91 ++++++++++++++++++++++
>  2 files changed, 91 insertions(+), 66 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Laurent Pinchart Nov. 18, 2019, 11:51 p.m. UTC | #2
Hi Fabrizio,

Thank you for the patch.

On Wed, Nov 13, 2019 at 03:51:20PM +0000, Fabrizio Castro wrote:
> Convert the lvds-transmitter binding to DT schema format using
> json-schema.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
> v3->v4:
> * Fixed the description of property "compatible" according to Laurent's
>   comments
> v2->v3:
> * Extracted conversion to dt-schema as per Rob's comment
> v1->v2:
> * Converted to dt-schema as per Neil's comment
> ---
>  .../bindings/display/bridge/lvds-transmitter.txt   | 66 ----------------
>  .../bindings/display/bridge/lvds-transmitter.yaml  | 91 ++++++++++++++++++++++
>  2 files changed, 91 insertions(+), 66 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
> deleted file mode 100644
> index 60091db..0000000
> --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -Parallel to LVDS Encoder
> -------------------------
> -
> -This binding supports the parallel to LVDS encoders that don't require any
> -configuration.
> -
> -LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
> -incompatible data link layers have been used over time to transmit image data
> -to LVDS panels. This binding targets devices compatible with the following
> -specifications only.
> -
> -[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
> -1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
> -[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
> -Semiconductor
> -[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
> -Electronics Standards Association (VESA)
> -
> -Those devices have been marketed under the FPD-Link and FlatLink brand names
> -among others.
> -
> -
> -Required properties:
> -
> -- compatible: Must be "lvds-encoder"
> -
> -  Any encoder compatible with this generic binding, but with additional
> -  properties not listed here, must list a device specific compatible first
> -  followed by this generic compatible.
> -
> -Required nodes:
> -
> -This device has two video ports. Their connections are modeled using the OF
> -graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> -
> -- Video port 0 for parallel input
> -- Video port 1 for LVDS output
> -
> -
> -Example
> --------
> -
> -lvds-encoder {
> -	compatible = "lvds-encoder";
> -
> -	ports {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		port@0 {
> -			reg = <0>;
> -
> -			lvds_enc_in: endpoint {
> -				remote-endpoint = <&display_out_rgb>;
> -			};
> -		};
> -
> -		port@1 {
> -			reg = <1>;
> -
> -			lvds_enc_out: endpoint {
> -				remote-endpoint = <&lvds_panel_in>;
> -			};
> -		};
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml
> new file mode 100644
> index 0000000..b5dd0da
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml
> @@ -0,0 +1,91 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/lvds-transmitter.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Parallel to LVDS Encoder
> +
> +maintainers:
> +  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> +
> +description: |
> +  This binding supports the parallel to LVDS encoders that don't require any
> +  configuration.
> +
> +  LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
> +  incompatible data link layers have been used over time to transmit image data
> +  to LVDS panels. This binding targets devices compatible with the following
> +  specifications only.
> +
> +  [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
> +  1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
> +  [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
> +  Semiconductor
> +  [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
> +  Electronics Standards Association (VESA)
> +
> +  Those devices have been marketed under the FPD-Link and FlatLink brand names
> +  among others.
> +
> +properties:
> +  compatible:
> +    description: |
> +      Any encoder compatible with this generic binding, but with additional
> +      properties not listed here, must define its own binding and list a device
> +      specific compatible first followed by the generic compatible.
> +    enum:
> +      - lvds-encoder
> +
> +  ports:
> +    type: object
> +    description: |
> +      This device has two video ports. Their connections are modeled using the
> +      OF graph bindings specified in Documentation/devicetree/bindings/graph.txt
> +    properties:
> +      port@0:
> +        type: object
> +        description: |
> +          Port 0 is for parallel input
> +
> +      port@1:
> +        type: object
> +        description: |
> +          Port 1 is for LVDS output
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - ports
> +
> +examples:
> +  - |
> +    lvds-encoder {
> +      compatible = "lvds-encoder";
> +
> +      ports {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        port@0 {
> +          reg = <0>;
> +
> +          lvds_enc_in: endpoint {
> +            remote-endpoint = <&display_out_rgb>;
> +          };
> +        };
> +
> +        port@1 {
> +          reg = <1>;
> +
> +          lvds_enc_out: endpoint {
> +            remote-endpoint = <&lvds_panel_in>;
> +          };
> +        };
> +      };
> +    };
> +
> +...
> -- 
> 2.7.4
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
deleted file mode 100644
index 60091db..0000000
--- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
+++ /dev/null
@@ -1,66 +0,0 @@ 
-Parallel to LVDS Encoder
-------------------------
-
-This binding supports the parallel to LVDS encoders that don't require any
-configuration.
-
-LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
-incompatible data link layers have been used over time to transmit image data
-to LVDS panels. This binding targets devices compatible with the following
-specifications only.
-
-[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
-1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
-[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
-Semiconductor
-[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
-Electronics Standards Association (VESA)
-
-Those devices have been marketed under the FPD-Link and FlatLink brand names
-among others.
-
-
-Required properties:
-
-- compatible: Must be "lvds-encoder"
-
-  Any encoder compatible with this generic binding, but with additional
-  properties not listed here, must list a device specific compatible first
-  followed by this generic compatible.
-
-Required nodes:
-
-This device has two video ports. Their connections are modeled using the OF
-graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 for parallel input
-- Video port 1 for LVDS output
-
-
-Example
--------
-
-lvds-encoder {
-	compatible = "lvds-encoder";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			lvds_enc_in: endpoint {
-				remote-endpoint = <&display_out_rgb>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lvds_enc_out: endpoint {
-				remote-endpoint = <&lvds_panel_in>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml
new file mode 100644
index 0000000..b5dd0da
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml
@@ -0,0 +1,91 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lvds-transmitter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parallel to LVDS Encoder
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This binding supports the parallel to LVDS encoders that don't require any
+  configuration.
+
+  LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
+  incompatible data link layers have been used over time to transmit image data
+  to LVDS panels. This binding targets devices compatible with the following
+  specifications only.
+
+  [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
+  1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
+  [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
+  Semiconductor
+  [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
+  Electronics Standards Association (VESA)
+
+  Those devices have been marketed under the FPD-Link and FlatLink brand names
+  among others.
+
+properties:
+  compatible:
+    description: |
+      Any encoder compatible with this generic binding, but with additional
+      properties not listed here, must define its own binding and list a device
+      specific compatible first followed by the generic compatible.
+    enum:
+      - lvds-encoder
+
+  ports:
+    type: object
+    description: |
+      This device has two video ports. Their connections are modeled using the
+      OF graph bindings specified in Documentation/devicetree/bindings/graph.txt
+    properties:
+      port@0:
+        type: object
+        description: |
+          Port 0 is for parallel input
+
+      port@1:
+        type: object
+        description: |
+          Port 1 is for LVDS output
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - ports
+
+examples:
+  - |
+    lvds-encoder {
+      compatible = "lvds-encoder";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+
+          lvds_enc_in: endpoint {
+            remote-endpoint = <&display_out_rgb>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+
+          lvds_enc_out: endpoint {
+            remote-endpoint = <&lvds_panel_in>;
+          };
+        };
+      };
+    };
+
+...