diff mbox series

[RESEND,1/4] dt-bindings: drm/bridge: analogix-anx7688: Add ANX7688 transmitter binding

Message ID 20191211061911.238393-2-hsinyi@chromium.org (mailing list archive)
State New, archived
Headers show
Series drm: bridge: anx7688 and mux drivers | expand

Commit Message

Hsin-Yi Wang Dec. 11, 2019, 6:19 a.m. UTC
From: Nicolas Boichat <drinkcat@chromium.org>

Add support for analogix,anx7688

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
Change from RFC to v1:
- txt to yaml
---
 .../bindings/display/bridge/anx7688.yaml      | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7688.yaml

Comments

Rob Herring (Arm) Dec. 19, 2019, 8:45 p.m. UTC | #1
On Wed, Dec 11, 2019 at 02:19:08PM +0800, Hsin-Yi Wang wrote:
> From: Nicolas Boichat <drinkcat@chromium.org>
> 
> Add support for analogix,anx7688
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
> Change from RFC to v1:
> - txt to yaml
> ---
>  .../bindings/display/bridge/anx7688.yaml      | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> new file mode 100644
> index 000000000000..cf79f7cf8fdf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/anx7688.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analogix ANX7688 SlimPort (Single-Chip Transmitter for DP over USB-C)
> +
> +maintainers:
> +  - Nicolas Boichat <drinkcat@chromium.org>
> +
> +description: |
> +  The ANX7688 is a single-chip mobile transmitter to support 4K 60 frames per
> +  second (4096x2160p60) or FHD 120 frames per second (1920x1080p120) video
> +  resolution from a smartphone or tablet with full function USB-C.
> +
> +  This binding only describes the HDMI to DP display bridge.
> +
> +properties:
> +  compatible:
> +    const: analogix,anx7688
> +
> +  reg:
> +    maxItems: 1
> +    description: I2C address of the device
> +
> +  ports:
> +    type: object
> +
> +    properties:
> +      port@0:
> +        type: object
> +        description: |
> +          Video port for HDMI input
> +
> +      port@1:
> +        type: object
> +        description: |
> +          Video port for eDP output
> +
> +    required:
> +      - port@0

Sometimes you have no output?

> +
> +required:
> +  - compatible
> +  - reg
> +  - ports

The example will have errors because it is missing 'ports'. Run 'make 
dt_binding_check'.

Add:

additionalProperties: false

> +
> +examples:
> +  - |
> +    anx7688: anx7688@2c {
> +      compatible = "analogix,anx7688";
> +      reg = <0x2c>;
> +
> +      port {
> +        anx7688_in: endpoint {
> +          remote-endpoint = <&hdmi0_out>;
> +        };
> +      };
> +    };
> -- 
> 2.24.0.525.g8f36a354ae-goog
>
Hsin-Yi Wang Dec. 20, 2019, 3:20 a.m. UTC | #2
On Fri, Dec 20, 2019 at 4:45 AM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Dec 11, 2019 at 02:19:08PM +0800, Hsin-Yi Wang wrote:
> > From: Nicolas Boichat <drinkcat@chromium.org>
> >
> > Add support for analogix,anx7688
> >
> > Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > ---
> > Change from RFC to v1:
> > - txt to yaml
> > ---
> >  .../bindings/display/bridge/anx7688.yaml      | 60 +++++++++++++++++++
> >  1 file changed, 60 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> > new file mode 100644
> > index 000000000000..cf79f7cf8fdf
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> > @@ -0,0 +1,60 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/anx7688.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Analogix ANX7688 SlimPort (Single-Chip Transmitter for DP over USB-C)
> > +
> > +maintainers:
> > +  - Nicolas Boichat <drinkcat@chromium.org>
> > +
> > +description: |
> > +  The ANX7688 is a single-chip mobile transmitter to support 4K 60 frames per
> > +  second (4096x2160p60) or FHD 120 frames per second (1920x1080p120) video
> > +  resolution from a smartphone or tablet with full function USB-C.
> > +
> > +  This binding only describes the HDMI to DP display bridge.
> > +
> > +properties:
> > +  compatible:
> > +    const: analogix,anx7688
> > +
> > +  reg:
> > +    maxItems: 1
> > +    description: I2C address of the device
> > +
> > +  ports:
> > +    type: object
> > +
> > +    properties:
> > +      port@0:
> > +        type: object
> > +        description: |
> > +          Video port for HDMI input
> > +
> > +      port@1:
> > +        type: object
> > +        description: |
> > +          Video port for eDP output
> > +
> > +    required:
> > +      - port@0
>
> Sometimes you have no output?
Yes, only input is required.
>
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - ports
>
> The example will have errors because it is missing 'ports'. Run 'make
> dt_binding_check'.
>
> Add:
>
> additionalProperties: false
>
Ack, will fix this. Thanks
> > +
> > +examples:
> > +  - |
> > +    anx7688: anx7688@2c {
> > +      compatible = "analogix,anx7688";
> > +      reg = <0x2c>;
> > +
> > +      port {
> > +        anx7688_in: endpoint {
> > +          remote-endpoint = <&hdmi0_out>;
> > +        };
> > +      };
> > +    };
> > --
> > 2.24.0.525.g8f36a354ae-goog
> >
Laurent Pinchart Dec. 20, 2019, 3:22 a.m. UTC | #3
Hi Hsin-Yi,

On Fri, Dec 20, 2019 at 11:20:13AM +0800, Hsin-Yi Wang wrote:
> On Fri, Dec 20, 2019 at 4:45 AM Rob Herring wrote:
> > On Wed, Dec 11, 2019 at 02:19:08PM +0800, Hsin-Yi Wang wrote:
> > > From: Nicolas Boichat <drinkcat@chromium.org>
> > >
> > > Add support for analogix,anx7688
> > >
> > > Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > > ---
> > > Change from RFC to v1:
> > > - txt to yaml
> > > ---
> > >  .../bindings/display/bridge/anx7688.yaml      | 60 +++++++++++++++++++
> > >  1 file changed, 60 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> > > new file mode 100644
> > > index 000000000000..cf79f7cf8fdf
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> > > @@ -0,0 +1,60 @@
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/bridge/anx7688.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Analogix ANX7688 SlimPort (Single-Chip Transmitter for DP over USB-C)
> > > +
> > > +maintainers:
> > > +  - Nicolas Boichat <drinkcat@chromium.org>
> > > +
> > > +description: |
> > > +  The ANX7688 is a single-chip mobile transmitter to support 4K 60 frames per
> > > +  second (4096x2160p60) or FHD 120 frames per second (1920x1080p120) video
> > > +  resolution from a smartphone or tablet with full function USB-C.
> > > +
> > > +  This binding only describes the HDMI to DP display bridge.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: analogix,anx7688
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +    description: I2C address of the device
> > > +
> > > +  ports:
> > > +    type: object
> > > +
> > > +    properties:
> > > +      port@0:
> > > +        type: object
> > > +        description: |
> > > +          Video port for HDMI input
> > > +
> > > +      port@1:
> > > +        type: object
> > > +        description: |
> > > +          Video port for eDP output
> > > +
> > > +    required:
> > > +      - port@0
> >
> > Sometimes you have no output?
>
> Yes, only input is required.

But what happens in that case ? What's the use of a bridge with a
non-connected output ? :-)

> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - ports
> >
> > The example will have errors because it is missing 'ports'. Run 'make
> > dt_binding_check'.
> >
> > Add:
> >
> > additionalProperties: false
> >
>
> Ack, will fix this. Thanks
>
> > > +
> > > +examples:
> > > +  - |
> > > +    anx7688: anx7688@2c {
> > > +      compatible = "analogix,anx7688";
> > > +      reg = <0x2c>;
> > > +
> > > +      port {
> > > +        anx7688_in: endpoint {
> > > +          remote-endpoint = <&hdmi0_out>;
> > > +        };
> > > +      };
> > > +    };
Hsin-Yi Wang Dec. 20, 2019, 3:51 a.m. UTC | #4
On Fri, Dec 20, 2019 at 11:22 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Hsin-Yi,
>
> On Fri, Dec 20, 2019 at 11:20:13AM +0800, Hsin-Yi Wang wrote:
> > On Fri, Dec 20, 2019 at 4:45 AM Rob Herring wrote:
> > > On Wed, Dec 11, 2019 at 02:19:08PM +0800, Hsin-Yi Wang wrote:
> > > > From: Nicolas Boichat <drinkcat@chromium.org>
> > > >
> > > > Add support for analogix,anx7688
> > > >
> > > > Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> > > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > > > ---
> > > > Change from RFC to v1:
> > > > - txt to yaml
> > > > ---
> > > >  .../bindings/display/bridge/anx7688.yaml      | 60 +++++++++++++++++++
> > > >  1 file changed, 60 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/bridge/anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> > > > new file mode 100644
> > > > index 000000000000..cf79f7cf8fdf
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> > > > @@ -0,0 +1,60 @@
> > > > +# SPDX-License-Identifier: GPL-2.0
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/display/bridge/anx7688.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Analogix ANX7688 SlimPort (Single-Chip Transmitter for DP over USB-C)
> > > > +
> > > > +maintainers:
> > > > +  - Nicolas Boichat <drinkcat@chromium.org>
> > > > +
> > > > +description: |
> > > > +  The ANX7688 is a single-chip mobile transmitter to support 4K 60 frames per
> > > > +  second (4096x2160p60) or FHD 120 frames per second (1920x1080p120) video
> > > > +  resolution from a smartphone or tablet with full function USB-C.
> > > > +
> > > > +  This binding only describes the HDMI to DP display bridge.
> > > > +
> > > > +properties:
> > > > +  compatible:
> > > > +    const: analogix,anx7688
> > > > +
> > > > +  reg:
> > > > +    maxItems: 1
> > > > +    description: I2C address of the device
> > > > +
> > > > +  ports:
> > > > +    type: object
> > > > +
> > > > +    properties:
> > > > +      port@0:
> > > > +        type: object
> > > > +        description: |
> > > > +          Video port for HDMI input
> > > > +
> > > > +      port@1:
> > > > +        type: object
> > > > +        description: |
> > > > +          Video port for eDP output
> > > > +
> > > > +    required:
> > > > +      - port@0
> > >
> > > Sometimes you have no output?
> >
> > Yes, only input is required.
>
> But what happens in that case ? What's the use of a bridge with a
> non-connected output ? :-)
>
There's output connected, but doesn't need a driver. For example, in
our use case it's connected to a usb-c connector. We don't need to
state it in dts.
I also checked https://elixir.bootlin.com/linux/v5.5-rc2/source/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
and thought that output could be optional. Also
https://elixir.bootlin.com/linux/v5.5-rc2/source/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts#L116
Or maybe we can add output in example as anx6345?
> > > > +
> > > > +required:
> > > > +  - compatible
> > > > +  - reg
> > > > +  - ports
> > >
> > > The example will have errors because it is missing 'ports'. Run 'make
> > > dt_binding_check'.
> > >
> > > Add:
> > >
> > > additionalProperties: false
> > >
> >
> > Ack, will fix this. Thanks
> >
> > > > +
> > > > +examples:
> > > > +  - |
> > > > +    anx7688: anx7688@2c {
> > > > +      compatible = "analogix,anx7688";
> > > > +      reg = <0x2c>;
> > > > +
> > > > +      port {
> > > > +        anx7688_in: endpoint {
> > > > +          remote-endpoint = <&hdmi0_out>;
> > > > +        };
> > > > +      };
> > > > +    };
>
> --
> Regards,
>
> Laurent Pinchart
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml
new file mode 100644
index 000000000000..cf79f7cf8fdf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml
@@ -0,0 +1,60 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/anx7688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7688 SlimPort (Single-Chip Transmitter for DP over USB-C)
+
+maintainers:
+  - Nicolas Boichat <drinkcat@chromium.org>
+
+description: |
+  The ANX7688 is a single-chip mobile transmitter to support 4K 60 frames per
+  second (4096x2160p60) or FHD 120 frames per second (1920x1080p120) video
+  resolution from a smartphone or tablet with full function USB-C.
+
+  This binding only describes the HDMI to DP display bridge.
+
+properties:
+  compatible:
+    const: analogix,anx7688
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device
+
+  ports:
+    type: object
+
+    properties:
+      port@0:
+        type: object
+        description: |
+          Video port for HDMI input
+
+      port@1:
+        type: object
+        description: |
+          Video port for eDP output
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - ports
+
+examples:
+  - |
+    anx7688: anx7688@2c {
+      compatible = "analogix,anx7688";
+      reg = <0x2c>;
+
+      port {
+        anx7688_in: endpoint {
+          remote-endpoint = <&hdmi0_out>;
+        };
+      };
+    };