@@ -58,29 +58,27 @@
display1: disp1 {
compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1>;
- display-timings {
- native-mode = <&timing0>;
- timing0: dvi {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- };
- };
- port {
+ port@0 {
+ reg = <0>;
+
display0_in: endpoint {
remote-endpoint = <&ipu_di0_disp1>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ parallel_display_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ };
+ };
};
display2: disp2 {
@@ -115,6 +113,42 @@
};
};
+ dvi-connector {
+ compatible = "dvi-connector";
+ digital;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ dvi-encoder {
+ compatible = "ti,tfp410";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <¶llel_display_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
imx51-babbage has a TFP410 chip that receives 24-bit RGB parallel input and convert it to DVI. Fix the device tree description to reflect the real hardware. Signed-off-by: Fabio Estevam <festevam@gmail.com> --- Changes since v1: - Use "dvi-connector" compatible arch/arm/boot/dts/imx51-babbage.dts | 64 ++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 15 deletions(-)