diff mbox series

[2/3] drm/i915: Include the AUX CH name in the debug messages

Message ID 20200123154542.12271-2-ville.syrjala@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series [1/3] drm/dp: Include the AUX CH name in the debug messages | expand

Commit Message

Ville Syrjala Jan. 23, 2020, 3:45 p.m. UTC 
From: Ville Syrjälä <ville.syrjala@linux.intel.com>

To make it easier to figure out what caused a particular debug
message let's print out aux->name.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

Comments

Matt Roper Jan. 23, 2020, 5:19 p.m. UTC | #1 
On Thu, Jan 23, 2020 at 05:45:41PM +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> To make it easier to figure out what caused a particular debug
> message let's print out aux->name.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

It might be worth adding commas to some of these messages too while
we're at it (e.g., "not started, status").  But either way, this is a
really helpful cleanup.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>


> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 19 +++++++++++--------
>  1 file changed, 11 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 1795963e1866..941f0f6d55c1 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -1186,7 +1186,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp)
>  	trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true);
>  
>  	if (!done)
> -		DRM_ERROR("%s did not complete or timeout within %ums (status 0x%08x)\n",
> +		DRM_ERROR("%s: did not complete or timeout within %ums (status 0x%08x)\n",
>  			  intel_dp->aux.name, timeout_ms, status);
>  #undef C
>  
> @@ -1373,8 +1373,8 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
>  		const u32 status = intel_uncore_read(uncore, ch_ctl);
>  
>  		if (status != intel_dp->aux_busy_last_status) {
> -			WARN(1, "dp_aux_ch not started status 0x%08x\n",
> -			     status);
> +			WARN(1, "%s: not started status 0x%08x\n",
> +			     intel_dp->aux.name, status);
>  			intel_dp->aux_busy_last_status = status;
>  		}
>  
> @@ -1435,7 +1435,8 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
>  	}
>  
>  	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
> -		DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
> +		DRM_ERROR("%s: not done status 0x%08x\n",
> +			  intel_dp->aux.name, status);
>  		ret = -EBUSY;
>  		goto out;
>  	}
> @@ -1445,7 +1446,8 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
>  	 * Timeouts occur when the sink is not connected
>  	 */
>  	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
> -		DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
> +		DRM_ERROR("%s: receive error status 0x%08x\n",
> +			  intel_dp->aux.name, status);
>  		ret = -EIO;
>  		goto out;
>  	}
> @@ -1453,7 +1455,8 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
>  	/* Timeouts occur when the device isn't connected, so they're
>  	 * "normal" -- don't fill the kernel log with these */
>  	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
> -		DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
> +		DRM_DEBUG_KMS("%s: timeout status 0x%08x\n",
> +			      intel_dp->aux.name, status);
>  		ret = -ETIMEDOUT;
>  		goto out;
>  	}
> @@ -1468,8 +1471,8 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
>  	 * drm layer takes care for the necessary retries.
>  	 */
>  	if (recv_bytes == 0 || recv_bytes > 20) {
> -		DRM_DEBUG_KMS("Forbidden recv_bytes = %d on aux transaction\n",
> -			      recv_bytes);
> +		DRM_DEBUG_KMS("%s: Forbidden recv_bytes = %d on aux transaction\n",
> +			      intel_dp->aux.name, recv_bytes);
>  		ret = -EBUSY;
>  		goto out;
>  	}
> -- 
> 2.24.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Ville Syrjala Jan. 27, 2020, 4:08 p.m. UTC | #2 
On Thu, Jan 23, 2020 at 09:19:04AM -0800, Matt Roper wrote:
> On Thu, Jan 23, 2020 at 05:45:41PM +0200, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > 
> > To make it easier to figure out what caused a particular debug
> > message let's print out aux->name.
> > 
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> It might be worth adding commas to some of these messages too while
> we're at it (e.g., "not started, status").  But either way, this is a
> really helpful cleanup.

Good idea. The first one of these already uses
"%s: blah (status 0x%x)" as the format, so I went ahead and
converted the rest to follow the same style.

> 
> Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

2-3 pushed to dinq. Thanks for the review.

> 
> 
> > ---
> >  drivers/gpu/drm/i915/display/intel_dp.c | 19 +++++++++++--------
> >  1 file changed, 11 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 1795963e1866..941f0f6d55c1 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -1186,7 +1186,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp)
> >  	trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true);
> >  
> >  	if (!done)
> > -		DRM_ERROR("%s did not complete or timeout within %ums (status 0x%08x)\n",
> > +		DRM_ERROR("%s: did not complete or timeout within %ums (status 0x%08x)\n",
> >  			  intel_dp->aux.name, timeout_ms, status);
> >  #undef C
> >  
> > @@ -1373,8 +1373,8 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
> >  		const u32 status = intel_uncore_read(uncore, ch_ctl);
> >  
> >  		if (status != intel_dp->aux_busy_last_status) {
> > -			WARN(1, "dp_aux_ch not started status 0x%08x\n",
> > -			     status);
> > +			WARN(1, "%s: not started status 0x%08x\n",
> > +			     intel_dp->aux.name, status);
> >  			intel_dp->aux_busy_last_status = status;
> >  		}
> >  
> > @@ -1435,7 +1435,8 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
> >  	}
> >  
> >  	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
> > -		DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
> > +		DRM_ERROR("%s: not done status 0x%08x\n",
> > +			  intel_dp->aux.name, status);
> >  		ret = -EBUSY;
> >  		goto out;
> >  	}
> > @@ -1445,7 +1446,8 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
> >  	 * Timeouts occur when the sink is not connected
> >  	 */
> >  	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
> > -		DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
> > +		DRM_ERROR("%s: receive error status 0x%08x\n",
> > +			  intel_dp->aux.name, status);
> >  		ret = -EIO;
> >  		goto out;
> >  	}
> > @@ -1453,7 +1455,8 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
> >  	/* Timeouts occur when the device isn't connected, so they're
> >  	 * "normal" -- don't fill the kernel log with these */
> >  	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
> > -		DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
> > +		DRM_DEBUG_KMS("%s: timeout status 0x%08x\n",
> > +			      intel_dp->aux.name, status);
> >  		ret = -ETIMEDOUT;
> >  		goto out;
> >  	}
> > @@ -1468,8 +1471,8 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
> >  	 * drm layer takes care for the necessary retries.
> >  	 */
> >  	if (recv_bytes == 0 || recv_bytes > 20) {
> > -		DRM_DEBUG_KMS("Forbidden recv_bytes = %d on aux transaction\n",
> > -			      recv_bytes);
> > +		DRM_DEBUG_KMS("%s: Forbidden recv_bytes = %d on aux transaction\n",
> > +			      intel_dp->aux.name, recv_bytes);
> >  		ret = -EBUSY;
> >  		goto out;
> >  	}
> > -- 
> > 2.24.1
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 
> -- 
> Matt Roper
> Graphics Software Engineer
> VTT-OSGC Platform Enablement
> Intel Corporation
> (916) 356-2795
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 1795963e1866..941f0f6d55c1 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1186,7 +1186,7 @@  intel_dp_aux_wait_done(struct intel_dp *intel_dp)
 	trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true);
 
 	if (!done)
-		DRM_ERROR("%s did not complete or timeout within %ums (status 0x%08x)\n",
+		DRM_ERROR("%s: did not complete or timeout within %ums (status 0x%08x)\n",
 			  intel_dp->aux.name, timeout_ms, status);
 #undef C
 
@@ -1373,8 +1373,8 @@  intel_dp_aux_xfer(struct intel_dp *intel_dp,
 		const u32 status = intel_uncore_read(uncore, ch_ctl);
 
 		if (status != intel_dp->aux_busy_last_status) {
-			WARN(1, "dp_aux_ch not started status 0x%08x\n",
-			     status);
+			WARN(1, "%s: not started status 0x%08x\n",
+			     intel_dp->aux.name, status);
 			intel_dp->aux_busy_last_status = status;
 		}
 
@@ -1435,7 +1435,8 @@  intel_dp_aux_xfer(struct intel_dp *intel_dp,
 	}
 
 	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
-		DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
+		DRM_ERROR("%s: not done status 0x%08x\n",
+			  intel_dp->aux.name, status);
 		ret = -EBUSY;
 		goto out;
 	}
@@ -1445,7 +1446,8 @@  intel_dp_aux_xfer(struct intel_dp *intel_dp,
 	 * Timeouts occur when the sink is not connected
 	 */
 	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
-		DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
+		DRM_ERROR("%s: receive error status 0x%08x\n",
+			  intel_dp->aux.name, status);
 		ret = -EIO;
 		goto out;
 	}
@@ -1453,7 +1455,8 @@  intel_dp_aux_xfer(struct intel_dp *intel_dp,
 	/* Timeouts occur when the device isn't connected, so they're
 	 * "normal" -- don't fill the kernel log with these */
 	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
-		DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
+		DRM_DEBUG_KMS("%s: timeout status 0x%08x\n",
+			      intel_dp->aux.name, status);
 		ret = -ETIMEDOUT;
 		goto out;
 	}
@@ -1468,8 +1471,8 @@  intel_dp_aux_xfer(struct intel_dp *intel_dp,
 	 * drm layer takes care for the necessary retries.
 	 */
 	if (recv_bytes == 0 || recv_bytes > 20) {
-		DRM_DEBUG_KMS("Forbidden recv_bytes = %d on aux transaction\n",
-			      recv_bytes);
+		DRM_DEBUG_KMS("%s: Forbidden recv_bytes = %d on aux transaction\n",
+			      intel_dp->aux.name, recv_bytes);
 		ret = -EBUSY;
 		goto out;
 	}