diff mbox series

[v2,4/6] dt-bindings: rockchip: Add DesignWare based PCIe controller

Message ID 1581574091-240890-5-git-send-email-shawn.lin@rock-chips.com (mailing list archive)
State New, archived
Headers show
Series Add Rockchip new PCIe controller and combo phy support | expand

Commit Message

Shawn Lin Feb. 13, 2020, 6:08 a.m. UTC
From: Simon Xue <xxm@rock-chips.com>

Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

---

Changes in v2:
- fix yaml format

 .../devicetree/bindings/pci/rockchip-dw-pcie.yaml  | 148 +++++++++++++++++++++
 1 file changed, 148 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml

Comments

Rob Herring (Arm) Feb. 13, 2020, 8:47 p.m. UTC | #1
On Thu, 13 Feb 2020 14:08:09 +0800, Shawn Lin wrote:
> From: Simon Xue <xxm@rock-chips.com>
> 
> Signed-off-by: Simon Xue <xxm@rock-chips.com>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> 
> ---
> 
> Changes in v2:
> - fix yaml format
> 
>  .../devicetree/bindings/pci/rockchip-dw-pcie.yaml  | 148 +++++++++++++++++++++
>  1 file changed, 148 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
Error: Documentation/devicetree/bindings/pci/rockchip-dw-pcie.example.dts:24.26-27 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:300: recipe for target 'Documentation/devicetree/bindings/pci/rockchip-dw-pcie.example.dt.yaml' failed
make[1]: *** [Documentation/devicetree/bindings/pci/rockchip-dw-pcie.example.dt.yaml] Error 1
Makefile:1263: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1237300
Please check and re-submit.
Rob Herring (Arm) May 7, 2020, 2:09 p.m. UTC | #2
On Thu, Feb 13, 2020 at 02:08:09PM +0800, Shawn Lin wrote:
> From: Simon Xue <xxm@rock-chips.com>
> 
> Signed-off-by: Simon Xue <xxm@rock-chips.com>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> 
> ---
> 
> Changes in v2:
> - fix yaml format
> 
>  .../devicetree/bindings/pci/rockchip-dw-pcie.yaml  | 148 +++++++++++++++++++++
>  1 file changed, 148 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> new file mode 100644
> index 0000000..527c770
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> @@ -0,0 +1,148 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: DesignWare based PCIe RC controller on Rockchip SoCs
> +
> +maintainers:
> +  - Shawn Lin <shawn.lin@rock-chips.com>
> +  - Simon Xue <xxm@rock-chips.com>
> +
> +# We need a select here so we don't match all nodes with 'snps,dw-pcie'
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        const: rockchip,rk1808-pcie
> +  required:
> +    - compatible
> +

Need to reference pci-bus.yaml.

> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,rk1808-pcie
> +      - snps,dw-pcie

Doesn't match the example. This says 1 string that either of the 2 
strings.

> +
> +  reg:
> +    maxItems: 1

Example shows 2. If so, need to define here what each one is.

> +
> +  clocks:
> +    items:
> +      - description: High speed clock for PCIe
> +      - description: Low speed clock for PCIe
> +      - description: AHB clock for PCIe
> +      - description: APB clock for PCIe
> +      - description: Auxiliary clock for PCIe
> +
> +  clock-names:
> +    items:
> +      - const: hsclk
> +      - const: lsclk
> +      - const: aclk
> +      - const: pclk
> +      - const: sclk-aux
> +
> +  resets:
> +    items:
> +      - description: PCIe niu high reset line
> +      - description: PCIe niu low reset line
> +      - description: PCIe grf reset line
> +      - description: PCIe control reset line
> +      - description: PCIe control powerup reset line
> +      - description: PCIe control master reset line
> +      - description: PCIe control slave reset line
> +      - description: PCIe control dbi reset line
> +      - description: PCIe control button reset line
> +      - description: PCIe control power engine reset line
> +      - description: PCIe control core reset line
> +      - description: PCIe control non-sticky reset line
> +      - description: PCIe control sticky reset line
> +      - description: PCIe control power reset line
> +      - description: PCIe niu ahb reset line
> +      - description: PCIe niu apb reset line
> +
> +  reset-names:
> +    items:
> +      - const: niu-h
> +      - const: niu-l
> +      - const: grf-p
> +      - const: ctl-p
> +      - const: ctl-powerup
> +      - const: ctl-mst-a
> +      - const: ctl-slv-a
> +      - const: ctl-dbi-a
> +      - const: ctl-button
> +      - const: ctl-pe
> +      - const: ctl-core
> +      - const: ctl-nsticky
> +      - const: ctl-sticky
> +      - const: ctl-pwr
> +      - const: ctl-niu-a
> +      - const: ctl-niu-p
> +
> +  rockchip,usbpciegrf:
> +    enum:
> +      - rockchip,usbpciegrf
> +    description: The grf for COMBPHY configuration and state registers.

COMBOPHY?

Why isn't this part of the phy node?

> +
> +required:
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +  - reg
> +  - clocks
> +  - clock-names
> +  - msi-map
> +  - num-lanes
> +  - phys
> +  - phy-names
> +  - ranges
> +  - resets
> +  - reset-names
> +  - rockchip,usbpciegrf
> +  - reset-gpios
> +
> +additionalProperties: false

With pci-bus.yaml included, this will have to be 
'unevaluatedProperties: false'.

> +
> +examples:
> +  - |
> +    pcie0: pcie@fc400000 {

Unit address should be first entry in 'reg'.

> +      compatible = "rockchip,rk1808-pcie", "snps,dw-pcie";
> +      #address-cells = <3>;
> +      #size-cells = <2>;
> +      bus-range = <0x0 0x1f>;
> +      reg = <0x0 0xfc000000 0x0 0x400000>,
> +            <0x0 0xfc400000 0x0 0x10000>;
> +      clocks = <&cru HSCLK_PCIE>, <&cru LSCLK_PCIE>,
> +               <&cru ACLK_PCIE>, <&cru PCLK_PCIE>,
> +               <&cru SCLK_PCIE_AUX>;
> +      clock-names = "hsclk", "lsclk",
> +                    "aclk", "pclk",
> +                    "sclk-aux";
> +      msi-map = <0x0 &its 0x0 0x1000>;
> +      num-lanes = <2>;
> +      phys = <&combphy PHY_TYPE_PCIE>;

Not documented.

> +      phy-names = "pcie-phy";

Not documented. Not really needed if only 1.

> +      ranges = <0x00000800 0x0 0xf8000000 0x0 0xf8000000 0x0 0x800000
> +                0x83000000 0x0 0xf8800000 0x0 0xf8800000 0x0 0x3700000
> +                0x81000000 0x0 0xfbf00000 0x0 0xfbf00000 0x0 0x100000>;
> +      resets = <&cru SRST_PCIE_NIU_H>, <&cru SRST_PCIE_NIU_L>,
> +               <&cru SRST_PCIEGRF_P>, <&cru SRST_PCIECTL_P>,
> +               <&cru SRST_PCIECTL_POWERUP>, <&cru SRST_PCIECTL_MST_A>,
> +               <&cru SRST_PCIECTL_SLV_A>, <&cru SRST_PCIECTL_DBI_A>,
> +               <&cru SRST_PCIECTL_BUTTON>, <&cru SRST_PCIECTL_PE>,
> +               <&cru SRST_PCIECTL_CORE>, <&cru SRST_PCIECTL_NSTICKY>,
> +               <&cru SRST_PCIECTL_STICKY>, <&cru SRST_PCIECTL_PWR>,
> +               <&cru SRST_PCIE_NIU_A>, <&cru SRST_PCIE_NIU_P>;
> +      reset-names = "niu-h", "niu-l", "grf-p", "ctl-p",
> +                    "ctl-powerup", "ctl-mst-a", "ctl-slv-a",
> +                    "ctl-dbi-a", "ctl-button", "ctl-pe",
> +                    "ctl-core", "ctl-nsticky", "ctl-sticky",
> +                    "ctl-pwr", "ctl-niu-a", "ctl-niu-p";
> +      rockchip,usbpciegrf = <&usb_pcie_grf>;
> +      reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
> +    };
> +
> +...
> -- 
> 1.9.1
> 
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
new file mode 100644
index 0000000..527c770
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -0,0 +1,148 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe RC controller on Rockchip SoCs
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+  - Simon Xue <xxm@rock-chips.com>
+
+# We need a select here so we don't match all nodes with 'snps,dw-pcie'
+select:
+  properties:
+    compatible:
+      contains:
+        const: rockchip,rk1808-pcie
+  required:
+    - compatible
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk1808-pcie
+      - snps,dw-pcie
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: High speed clock for PCIe
+      - description: Low speed clock for PCIe
+      - description: AHB clock for PCIe
+      - description: APB clock for PCIe
+      - description: Auxiliary clock for PCIe
+
+  clock-names:
+    items:
+      - const: hsclk
+      - const: lsclk
+      - const: aclk
+      - const: pclk
+      - const: sclk-aux
+
+  resets:
+    items:
+      - description: PCIe niu high reset line
+      - description: PCIe niu low reset line
+      - description: PCIe grf reset line
+      - description: PCIe control reset line
+      - description: PCIe control powerup reset line
+      - description: PCIe control master reset line
+      - description: PCIe control slave reset line
+      - description: PCIe control dbi reset line
+      - description: PCIe control button reset line
+      - description: PCIe control power engine reset line
+      - description: PCIe control core reset line
+      - description: PCIe control non-sticky reset line
+      - description: PCIe control sticky reset line
+      - description: PCIe control power reset line
+      - description: PCIe niu ahb reset line
+      - description: PCIe niu apb reset line
+
+  reset-names:
+    items:
+      - const: niu-h
+      - const: niu-l
+      - const: grf-p
+      - const: ctl-p
+      - const: ctl-powerup
+      - const: ctl-mst-a
+      - const: ctl-slv-a
+      - const: ctl-dbi-a
+      - const: ctl-button
+      - const: ctl-pe
+      - const: ctl-core
+      - const: ctl-nsticky
+      - const: ctl-sticky
+      - const: ctl-pwr
+      - const: ctl-niu-a
+      - const: ctl-niu-p
+
+  rockchip,usbpciegrf:
+    enum:
+      - rockchip,usbpciegrf
+    description: The grf for COMBPHY configuration and state registers.
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - clocks
+  - clock-names
+  - msi-map
+  - num-lanes
+  - phys
+  - phy-names
+  - ranges
+  - resets
+  - reset-names
+  - rockchip,usbpciegrf
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie0: pcie@fc400000 {
+      compatible = "rockchip,rk1808-pcie", "snps,dw-pcie";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      bus-range = <0x0 0x1f>;
+      reg = <0x0 0xfc000000 0x0 0x400000>,
+            <0x0 0xfc400000 0x0 0x10000>;
+      clocks = <&cru HSCLK_PCIE>, <&cru LSCLK_PCIE>,
+               <&cru ACLK_PCIE>, <&cru PCLK_PCIE>,
+               <&cru SCLK_PCIE_AUX>;
+      clock-names = "hsclk", "lsclk",
+                    "aclk", "pclk",
+                    "sclk-aux";
+      msi-map = <0x0 &its 0x0 0x1000>;
+      num-lanes = <2>;
+      phys = <&combphy PHY_TYPE_PCIE>;
+      phy-names = "pcie-phy";
+      ranges = <0x00000800 0x0 0xf8000000 0x0 0xf8000000 0x0 0x800000
+                0x83000000 0x0 0xf8800000 0x0 0xf8800000 0x0 0x3700000
+                0x81000000 0x0 0xfbf00000 0x0 0xfbf00000 0x0 0x100000>;
+      resets = <&cru SRST_PCIE_NIU_H>, <&cru SRST_PCIE_NIU_L>,
+               <&cru SRST_PCIEGRF_P>, <&cru SRST_PCIECTL_P>,
+               <&cru SRST_PCIECTL_POWERUP>, <&cru SRST_PCIECTL_MST_A>,
+               <&cru SRST_PCIECTL_SLV_A>, <&cru SRST_PCIECTL_DBI_A>,
+               <&cru SRST_PCIECTL_BUTTON>, <&cru SRST_PCIECTL_PE>,
+               <&cru SRST_PCIECTL_CORE>, <&cru SRST_PCIECTL_NSTICKY>,
+               <&cru SRST_PCIECTL_STICKY>, <&cru SRST_PCIECTL_PWR>,
+               <&cru SRST_PCIE_NIU_A>, <&cru SRST_PCIE_NIU_P>;
+      reset-names = "niu-h", "niu-l", "grf-p", "ctl-p",
+                    "ctl-powerup", "ctl-mst-a", "ctl-slv-a",
+                    "ctl-dbi-a", "ctl-button", "ctl-pe",
+                    "ctl-core", "ctl-nsticky", "ctl-sticky",
+                    "ctl-pwr", "ctl-niu-a", "ctl-niu-p";
+      rockchip,usbpciegrf = <&usb_pcie_grf>;
+      reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+    };
+
+...