Message ID | 20200219123933.2792-3-nsaenzjulienne@suse.de (mailing list archive) |
---|---|
State | Superseded, archived |
Delegated to: | Lorenzo Pieralisi |
Headers | show |
Series | Raspberry Pi 4 VL805 firmware load support | expand |
On 2/19/20 4:39 AM, Nicolas Saenz Julienne wrote: > On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be > loaded directly from an EEPROM or, if not present, by the SoC's > VideCore. The function informs VideCore that VL805 was just reset, or > requests for a probe defer. > > Based on Tim Gover's downstream implementation. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > --- [snip] > diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h > index cc9cdbc66403..a37c3a461d2a 100644 > --- a/include/soc/bcm2835/raspberrypi-firmware.h > +++ b/include/soc/bcm2835/raspberrypi-firmware.h > @@ -8,6 +8,7 @@ > > #include <linux/types.h> > #include <linux/of_device.h> > +#include <linux/pci.h> I would move this inclusion where we need it, which is in drivers/firmware/raspberrypi.c and only provide a forward declaration here (avoids needless rebuilds). With that: Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
On Wed, 2020-02-19 at 11:13 -0800, Florian Fainelli wrote: > On 2/19/20 4:39 AM, Nicolas Saenz Julienne wrote: > > On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be > > loaded directly from an EEPROM or, if not present, by the SoC's > > VideCore. The function informs VideCore that VL805 was just reset, or > > requests for a probe defer. > > > > Based on Tim Gover's downstream implementation. > > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > --- > > [snip] > > > > diff --git a/include/soc/bcm2835/raspberrypi-firmware.h > > b/include/soc/bcm2835/raspberrypi-firmware.h > > index cc9cdbc66403..a37c3a461d2a 100644 > > --- a/include/soc/bcm2835/raspberrypi-firmware.h > > +++ b/include/soc/bcm2835/raspberrypi-firmware.h > > @@ -8,6 +8,7 @@ > > > > #include <linux/types.h> > > #include <linux/of_device.h> > > +#include <linux/pci.h> > > I would move this inclusion where we need it, which is in > drivers/firmware/raspberrypi.c and only provide a forward declaration > here (avoids needless rebuilds). Noted
diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index da26a584dca0..cc0563029805 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -286,6 +286,43 @@ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) } EXPORT_SYMBOL_GPL(rpi_firmware_get); +/* + * On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be + * loaded directly from an EEPROM or, if not present, by the SoC's VideCore. + * Inform VideCore that VL805 was just reset, or defer xhci's probe if not yet + * joinable trough the mailbox interface. + */ +int rpi_firmware_init_vl805(struct pci_dev *pdev) +{ + struct device_node *fw_np; + struct rpi_firmware *fw; + u32 dev_addr; + int ret; + + fw_np = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); + if (!fw_np) + return 0; + + fw = rpi_firmware_get(fw_np); + of_node_put(fw_np); + if (!fw) + return -EPROBE_DEFER; + + dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 | + PCI_FUNC(pdev->devfn) << 12; + + ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, + &dev_addr, sizeof(dev_addr)); + if (ret) + return ret; + + dev_dbg(&pdev->dev, "loaded Raspberry Pi's VL805 firmware\n"); + + return 0; +} +EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805); + static const struct of_device_id rpi_firmware_of_match[] = { { .compatible = "raspberrypi,bcm2835-firmware", }, {}, diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h index cc9cdbc66403..a37c3a461d2a 100644 --- a/include/soc/bcm2835/raspberrypi-firmware.h +++ b/include/soc/bcm2835/raspberrypi-firmware.h @@ -8,6 +8,7 @@ #include <linux/types.h> #include <linux/of_device.h> +#include <linux/pci.h> struct rpi_firmware; @@ -141,6 +142,7 @@ int rpi_firmware_property(struct rpi_firmware *fw, int rpi_firmware_property_list(struct rpi_firmware *fw, void *data, size_t tag_size); struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node); +int rpi_firmware_init_vl805(struct pci_dev *pdev); #else static inline int rpi_firmware_property(struct rpi_firmware *fw, u32 tag, void *data, size_t len) @@ -158,6 +160,11 @@ static inline struct rpi_firmware *rpi_firmware_get(struct device_node *firmware { return NULL; } + +static int rpi_firmware_init_vl805(struct pci_dev *pdev) +{ + return 0; +} #endif #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */
On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's VideCore. The function informs VideCore that VL805 was just reset, or requests for a probe defer. Based on Tim Gover's downstream implementation. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> --- Changes since v1: - Moved into own commit and firmware/raspberrypi.c drivers/firmware/raspberrypi.c | 37 ++++++++++++++++++++++ include/soc/bcm2835/raspberrypi-firmware.h | 7 ++++ 2 files changed, 44 insertions(+)