| Message ID | 1580305274-27274-1-git-send-email-martin.fuzzey@flowbird.group (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | dmaengine: imx-sdma: fix context cache | expand |
Hi Martin, Thanks for the fix. On Wed, Jan 29, 2020 at 10:41 AM Martin Fuzzey <martin.fuzzey@flowbird.group> wrote: > > There is a DMA problem with the serial ports on i.MX6. > > When the following sequence is performed: > > 1) Open a port > 2) Write some data > 3) Close the port > 4) Open a *different* port > 5) Write some data > 6) Close the port > > The second write sends nothing and the second close hangs. > If the first close() is omitted it works. > > Adding logs to the the UART driver shows that the DMA is being setup but > the callback is never invoked for the second write. > > This used to work in 4.19. > > Git bisect leads to: > ad0d92d: "dmaengine: imx-sdma: refine to load context only once" > > This commit adds a "context_loaded" flag used to avoid unnecessary context > setups. > However the flag is only reset in sdma_channel_terminate_work(), > which is only invoked in a worker triggered by sdma_terminate_all() IF > there is an active descriptor. > > So, if no active descriptor remains when the channel is terminated, the > flag is not reset and, when the channel is later reused the old context > is used. > > Fix the problem by always resetting the flag in sdma_free_chan_resources(). > > Fixes: ad0d92d: "dmaengine: imx-sdma: refine to load context only once" Nit: in the Fixes tag we use 12 digits for the commit ID and the Subject is enclosed by parenthesis. The preferred format would be: Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once") Reviewed-by: Fabio Estevam <festevam@gmail.com> Thanks
On 29-01-20, 17:19, Fabio Estevam wrote: > Hi Martin, > > Thanks for the fix. > > On Wed, Jan 29, 2020 at 10:41 AM Martin Fuzzey > <martin.fuzzey@flowbird.group> wrote: > > > > There is a DMA problem with the serial ports on i.MX6. > > > > When the following sequence is performed: > > > > 1) Open a port > > 2) Write some data > > 3) Close the port > > 4) Open a *different* port > > 5) Write some data > > 6) Close the port > > > > The second write sends nothing and the second close hangs. > > If the first close() is omitted it works. > > > > Adding logs to the the UART driver shows that the DMA is being setup but > > the callback is never invoked for the second write. > > > > This used to work in 4.19. > > > > Git bisect leads to: > > ad0d92d: "dmaengine: imx-sdma: refine to load context only once" > > > > This commit adds a "context_loaded" flag used to avoid unnecessary context > > setups. > > However the flag is only reset in sdma_channel_terminate_work(), > > which is only invoked in a worker triggered by sdma_terminate_all() IF > > there is an active descriptor. > > > > So, if no active descriptor remains when the channel is terminated, the > > flag is not reset and, when the channel is later reused the old context > > is used. > > > > Fix the problem by always resetting the flag in sdma_free_chan_resources(). > > > > Fixes: ad0d92d: "dmaengine: imx-sdma: refine to load context only once" > > Nit: in the Fixes tag we use 12 digits for the commit ID and the > Subject is enclosed by parenthesis. > > The preferred format would be: > > Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once") > > Reviewed-by: Fabio Estevam <festevam@gmail.com> Applied, with updated Fixes line. Thanks
Hi, On Wed, Jan 29, 2020 at 02:40:06PM +0100, Martin Fuzzey wrote: > There is a DMA problem with the serial ports on i.MX6. > > When the following sequence is performed: > > 1) Open a port > 2) Write some data > 3) Close the port > 4) Open a *different* port > 5) Write some data > 6) Close the port > > The second write sends nothing and the second close hangs. > If the first close() is omitted it works. > > Adding logs to the the UART driver shows that the DMA is being setup but > the callback is never invoked for the second write. > > This used to work in 4.19. > > Git bisect leads to: > ad0d92d: "dmaengine: imx-sdma: refine to load context only once" > > This commit adds a "context_loaded" flag used to avoid unnecessary context > setups. > However the flag is only reset in sdma_channel_terminate_work(), > which is only invoked in a worker triggered by sdma_terminate_all() IF > there is an active descriptor. > > So, if no active descriptor remains when the channel is terminated, the > flag is not reset and, when the channel is later reused the old context > is used. > > Fix the problem by always resetting the flag in sdma_free_chan_resources(). > > Fixes: ad0d92d: "dmaengine: imx-sdma: refine to load context only once" > Cc: stable@vger.kernel.org > Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> > Thanks for the patch! We were chasing this issue for days and just found your patch as we were preparing our (quite similar) solution for submission ;-) I've successfully tested your patch on a custom i.MX6Solo board. Therefore feel free to add Tested-by: Richard Leitner <richard.leitner@skidata.com> regards;rl
On 2020/01/29 Martin Fuzzey <martin.fuzzey@flowbird.group> wrote: > > There is a DMA problem with the serial ports on i.MX6. > > When the following sequence is performed: > > 1) Open a port > 2) Write some data > 3) Close the port > 4) Open a *different* port > 5) Write some data > 6) Close the port > > The second write sends nothing and the second close hangs. > If the first close() is omitted it works. > > Adding logs to the the UART driver shows that the DMA is being setup but the > callback is never invoked for the second write. > > This used to work in 4.19. > > Git bisect leads to: > ad0d92d: "dmaengine: imx-sdma: refine to load context only once" > > This commit adds a "context_loaded" flag used to avoid unnecessary context > setups. > However the flag is only reset in sdma_channel_terminate_work(), which is > only invoked in a worker triggered by sdma_terminate_all() IF there is an active > descriptor. > > So, if no active descriptor remains when the channel is terminated, the flag is > not reset and, when the channel is later reused the old context is used. > > Fix the problem by always resetting the flag in sdma_free_chan_resources(). > > Fixes: ad0d92d: "dmaengine: imx-sdma: refine to load context only once" > Cc: stable@vger.kernel.org > Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> > > --- > > The following python script may be used to reproduce the problem: > > import re, serial, sys > > ports=(0, 4) # Can be any ports not used (no need to connect anything) NOT > console... > > def get_tx_counts(): > pattern = re.compile("(\d+):.*tx:(\d+).*") > tx_counts = {} > with open("/proc/tty/driver/IMX-uart", "r") as f: > for line in f: > match = pattern.match(line) > if match: > tx_counts[int(match.group(1))] = > int(match.group(2)) > return tx_counts > > before = get_tx_counts() > > a = serial.Serial("/dev/ttymxc%d" % ports[0]) > a.write("polop") > a.close() > b = serial.Serial("/dev/ttymxc%d" % ports[1]) > b.write("test") > > after = get_tx_counts() > > if (after[ports[0]] - before[ports[0]] > 0) and (after[ports[1]] - before[ports[1]] > > 0): > print "PASS" > sys.exit(0) > else: > print "FAIL" > print "Before: %s" % before > print "After: %s" % after > sys.exit(1) > --- > drivers/dma/imx-sdma.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index > 066b21a..332ca50 100644 > --- a/drivers/dma/imx-sdma.c > +++ b/drivers/dma/imx-sdma.c > @@ -1338,6 +1338,7 @@ static void sdma_free_chan_resources(struct > dma_chan *chan) > > sdmac->event_id0 = 0; > sdmac->event_id1 = 0; > + sdmac->context_loaded = false; Martin, thanks for you patch, sorry for the issue left in kernel for so long, because my below patch set has been pending from last year. I would like revert commit ad0d92d: "dmaengine: imx-sdma: refine to load context only once" since some drivers may change. context during two transfer like spi did. I would pick up this patch set this week anyway. https://lore.kernel.org/patchwork/patch/1086454/ > > sdma_set_channel_priority(sdmac, 0); > > -- > 1.9.1
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 066b21a..332ca50 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1338,6 +1338,7 @@ static void sdma_free_chan_resources(struct dma_chan *chan) sdmac->event_id0 = 0; sdmac->event_id1 = 0; + sdmac->context_loaded = false; sdma_set_channel_priority(sdmac, 0);
There is a DMA problem with the serial ports on i.MX6. When the following sequence is performed: 1) Open a port 2) Write some data 3) Close the port 4) Open a *different* port 5) Write some data 6) Close the port The second write sends nothing and the second close hangs. If the first close() is omitted it works. Adding logs to the the UART driver shows that the DMA is being setup but the callback is never invoked for the second write. This used to work in 4.19. Git bisect leads to: ad0d92d: "dmaengine: imx-sdma: refine to load context only once" This commit adds a "context_loaded" flag used to avoid unnecessary context setups. However the flag is only reset in sdma_channel_terminate_work(), which is only invoked in a worker triggered by sdma_terminate_all() IF there is an active descriptor. So, if no active descriptor remains when the channel is terminated, the flag is not reset and, when the channel is later reused the old context is used. Fix the problem by always resetting the flag in sdma_free_chan_resources(). Fixes: ad0d92d: "dmaengine: imx-sdma: refine to load context only once" Cc: stable@vger.kernel.org Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> --- The following python script may be used to reproduce the problem: import re, serial, sys ports=(0, 4) # Can be any ports not used (no need to connect anything) NOT console... def get_tx_counts(): pattern = re.compile("(\d+):.*tx:(\d+).*") tx_counts = {} with open("/proc/tty/driver/IMX-uart", "r") as f: for line in f: match = pattern.match(line) if match: tx_counts[int(match.group(1))] = int(match.group(2)) return tx_counts before = get_tx_counts() a = serial.Serial("/dev/ttymxc%d" % ports[0]) a.write("polop") a.close() b = serial.Serial("/dev/ttymxc%d" % ports[1]) b.write("test") after = get_tx_counts() if (after[ports[0]] - before[ports[0]] > 0) and (after[ports[1]] - before[ports[1]] > 0): print "PASS" sys.exit(0) else: print "FAIL" print "Before: %s" % before print "After: %s" % after sys.exit(1) --- drivers/dma/imx-sdma.c | 1 + 1 file changed, 1 insertion(+)