diff mbox series

pci: brcmstb: Fix build on 32bit ARM platforms with older compilers

Message ID 20200227115146.24515-1-m.szyprowski@samsung.com (mailing list archive)
State Mainlined, archived
Commit 73a7a271b3eee7b83f29b13866163776f1cbef89
Delegated to: Lorenzo Pieralisi
Headers show
Series pci: brcmstb: Fix build on 32bit ARM platforms with older compilers | expand

Commit Message

Marek Szyprowski Feb. 27, 2020, 11:51 a.m. UTC
Some older compilers have no implementation for the helper for 64-bit
unsigned division/modulo, so linking pcie-brcmstb driver causes the
"undefined reference to `__aeabi_uldivmod'" error.

*rc_bar2_size is always a power of two, because it is calculated as:
"1ULL << fls64(entry->res->end - entry->res->start)", so the modulo
operation in the subsequent check can be replaced by a simple logical
AND with a proper mask.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Nicolas Saenz Julienne Feb. 27, 2020, 11:56 a.m. UTC | #1
On Thu, 2020-02-27 at 12:51 +0100, Marek Szyprowski wrote:
> Some older compilers have no implementation for the helper for 64-bit
> unsigned division/modulo, so linking pcie-brcmstb driver causes the
> "undefined reference to `__aeabi_uldivmod'" error.
> 
> *rc_bar2_size is always a power of two, because it is calculated as:
> "1ULL << fls64(entry->res->end - entry->res->start)", so the modulo
> operation in the subsequent check can be replaced by a simple logical
> AND with a proper mask.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

Thanks!
Nicolas
Lorenzo Pieralisi Feb. 27, 2020, 12:30 p.m. UTC | #2
Subject should be:

PCI: brcmstb: Fix build on 32bit ARM platforms with older compilers

On Thu, Feb 27, 2020 at 12:51:46PM +0100, Marek Szyprowski wrote:
> Some older compilers have no implementation for the helper for 64-bit
> unsigned division/modulo, so linking pcie-brcmstb driver causes the
> "undefined reference to `__aeabi_uldivmod'" error.
> 
> *rc_bar2_size is always a power of two, because it is calculated as:
> "1ULL << fls64(entry->res->end - entry->res->start)", so the modulo
> operation in the subsequent check can be replaced by a simple logical
> AND with a proper mask.
> 

Add a Fixes: tag please.

Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")

> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  drivers/pci/controller/pcie-brcmstb.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Hi Bjorn,

I think this should be merged in one of the upcoming -rc, given that
it fixes v5.6 material.

Here is my ACK to that end, if you prefer postponing it to v5.7
please let me know.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index d20aabc26273..3a10e678c7f4 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -670,7 +670,7 @@ static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
>  	 *   outbound memory @ 3GB). So instead it will  start at the 1x
>  	 *   multiple of its size
>  	 */
> -	if (!*rc_bar2_size || *rc_bar2_offset % *rc_bar2_size ||
> +	if (!*rc_bar2_size || (*rc_bar2_offset & (*rc_bar2_size - 1)) ||
>  	    (*rc_bar2_offset < SZ_4G && *rc_bar2_offset > SZ_2G)) {
>  		dev_err(dev, "Invalid rc_bar2_offset/size: size 0x%llx, off 0x%llx\n",
>  			*rc_bar2_size, *rc_bar2_offset);
> -- 
> 2.17.1
>
Bjorn Helgaas Feb. 27, 2020, 2:09 p.m. UTC | #3
On Thu, Feb 27, 2020 at 12:51:46PM +0100, Marek Szyprowski wrote:
> Some older compilers have no implementation for the helper for 64-bit
> unsigned division/modulo, so linking pcie-brcmstb driver causes the
> "undefined reference to `__aeabi_uldivmod'" error.
> 
> *rc_bar2_size is always a power of two, because it is calculated as:
> "1ULL << fls64(entry->res->end - entry->res->start)", so the modulo
> operation in the subsequent check can be replaced by a simple logical
> AND with a proper mask.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Applied to for-linus for v5.6, thanks!  I added acks from Nicolas and
Lorenzo and also the Fixes: tag from Lorenzo.

> ---
>  drivers/pci/controller/pcie-brcmstb.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index d20aabc26273..3a10e678c7f4 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -670,7 +670,7 @@ static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
>  	 *   outbound memory @ 3GB). So instead it will  start at the 1x
>  	 *   multiple of its size
>  	 */
> -	if (!*rc_bar2_size || *rc_bar2_offset % *rc_bar2_size ||
> +	if (!*rc_bar2_size || (*rc_bar2_offset & (*rc_bar2_size - 1)) ||
>  	    (*rc_bar2_offset < SZ_4G && *rc_bar2_offset > SZ_2G)) {
>  		dev_err(dev, "Invalid rc_bar2_offset/size: size 0x%llx, off 0x%llx\n",
>  			*rc_bar2_size, *rc_bar2_offset);
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index d20aabc26273..3a10e678c7f4 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -670,7 +670,7 @@  static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
 	 *   outbound memory @ 3GB). So instead it will  start at the 1x
 	 *   multiple of its size
 	 */
-	if (!*rc_bar2_size || *rc_bar2_offset % *rc_bar2_size ||
+	if (!*rc_bar2_size || (*rc_bar2_offset & (*rc_bar2_size - 1)) ||
 	    (*rc_bar2_offset < SZ_4G && *rc_bar2_offset > SZ_2G)) {
 		dev_err(dev, "Invalid rc_bar2_offset/size: size 0x%llx, off 0x%llx\n",
 			*rc_bar2_size, *rc_bar2_offset);