Message ID | 20200321090802.11537-5-alexandru.ardelean@analog.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2,1/5] iio: adc: ad7780: define/use own IIO channel macros | expand |
On Sat, 21 Mar 2020 11:08:02 +0200 Alexandru Ardelean <alexandru.ardelean@analog.com> wrote: > This change uses the read_avail and '.info_mask_shared_by_type_available' > modifier to set the available scale. > Essentially, nothing changes to the driver's ABI. > > The main idea for this patch is to remove the AD7793 driver from > checkpatch's radar. There have been about ~3 attempts to fix/break the > 'in_voltage-voltage_scale_available' attribute, because checkpatch assumed > it to be an arithmetic operation and people were trying to change that. > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> At some point it might be nice to move the sampling_frequency over as well but clearly not remotely urgent! Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to poke at it. Thanks, Jonathan > --- > drivers/iio/adc/ad7793.c | 53 +++++++++++++++++++++++++++------------- > 1 file changed, 36 insertions(+), 17 deletions(-) > > diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c > index 5592ae573e6b..fad98f1801db 100644 > --- a/drivers/iio/adc/ad7793.c > +++ b/drivers/iio/adc/ad7793.c > @@ -354,29 +354,28 @@ static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( > static IIO_CONST_ATTR_NAMED(sampling_frequency_available_ad7797, > sampling_frequency_available, "123 62 50 33 17 16 12 10 8 6 4"); > > -static ssize_t ad7793_show_scale_available(struct device *dev, > - struct device_attribute *attr, char *buf) > +static int ad7793_read_avail(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + const int **vals, int *type, int *length, > + long mask) > { > - struct iio_dev *indio_dev = dev_to_iio_dev(dev); > struct ad7793_state *st = iio_priv(indio_dev); > - int i, len = 0; > > - for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) > - len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0], > - st->scale_avail[i][1]); > + switch (mask) { > + case IIO_CHAN_INFO_SCALE: > + *vals = (int *)st->scale_avail; > + *type = IIO_VAL_INT_PLUS_NANO; > + /* Values are stored in a 2D matrix */ > + *length = ARRAY_SIZE(st->scale_avail) * 2; > > - len += sprintf(buf + len, "\n"); > + return IIO_AVAIL_LIST; > + } > > - return len; > + return -EINVAL; > } > > -static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, > - in_voltage-voltage_scale_available, S_IRUGO, > - ad7793_show_scale_available, NULL, 0); > - > static struct attribute *ad7793_attributes[] = { > &iio_const_attr_sampling_frequency_available.dev_attr.attr, > - &iio_dev_attr_in_m_in_scale_available.dev_attr.attr, > NULL > }; > > @@ -534,6 +533,7 @@ static const struct iio_info ad7793_info = { > .read_raw = &ad7793_read_raw, > .write_raw = &ad7793_write_raw, > .write_raw_get_fmt = &ad7793_write_raw_get_fmt, > + .read_avail = ad7793_read_avail, > .attrs = &ad7793_attribute_group, > .validate_trigger = ad_sd_validate_trigger, > }; > @@ -547,7 +547,7 @@ static const struct iio_info ad7797_info = { > }; > > #define __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ > - _storagebits, _shift, _extend_name, _type, _mask_all) \ > + _storagebits, _shift, _extend_name, _type, _mask_type_av, _mask_all) \ > { \ > .type = (_type), \ > .differential = (_channel2 == -1 ? 0 : 1), \ > @@ -559,6 +559,7 @@ static const struct iio_info ad7797_info = { > .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > BIT(IIO_CHAN_INFO_OFFSET), \ > .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > + .info_mask_shared_by_type_available = (_mask_type_av), \ > .info_mask_shared_by_all = _mask_all, \ > .scan_index = (_si), \ > .scan_type = { \ > @@ -574,23 +575,41 @@ static const struct iio_info ad7797_info = { > _storagebits, _shift) \ > __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ > _storagebits, _shift, NULL, IIO_VOLTAGE, \ > + BIT(IIO_CHAN_INFO_SCALE), \ > BIT(IIO_CHAN_INFO_SAMP_FREQ)) > > #define AD7793_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ > _storagebits, _shift) \ > __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \ > _storagebits, _shift, "shorted", IIO_VOLTAGE, \ > + BIT(IIO_CHAN_INFO_SCALE), \ > BIT(IIO_CHAN_INFO_SAMP_FREQ)) > > #define AD7793_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \ > __AD7793_CHANNEL(_si, 0, -1, _address, _bits, \ > _storagebits, _shift, NULL, IIO_TEMP, \ > + 0, \ > BIT(IIO_CHAN_INFO_SAMP_FREQ)) > > #define AD7793_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \ > _shift) \ > __AD7793_CHANNEL(_si, _channel, -1, _address, _bits, \ > _storagebits, _shift, "supply", IIO_VOLTAGE, \ > + 0, \ > + BIT(IIO_CHAN_INFO_SAMP_FREQ)) > + > +#define AD7797_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ > + _storagebits, _shift) \ > + __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ > + _storagebits, _shift, NULL, IIO_VOLTAGE, \ > + 0, \ > + BIT(IIO_CHAN_INFO_SAMP_FREQ)) > + > +#define AD7797_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ > + _storagebits, _shift) \ > + __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \ > + _storagebits, _shift, "shorted", IIO_VOLTAGE, \ > + 0, \ > BIT(IIO_CHAN_INFO_SAMP_FREQ)) > > #define DECLARE_AD7793_CHANNELS(_name, _b, _sb, _s) \ > @@ -620,8 +639,8 @@ const struct iio_chan_spec _name##_channels[] = { \ > > #define DECLARE_AD7797_CHANNELS(_name, _b, _sb) \ > const struct iio_chan_spec _name##_channels[] = { \ > - AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ > - AD7793_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ > + AD7797_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ > + AD7797_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ > AD7793_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \ > AD7793_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \ > IIO_CHAN_SOFT_TIMESTAMP(4), \
On Sat, Mar 21, 2020 at 11:08:02AM +0200, Alexandru Ardelean wrote: > This change uses the read_avail and '.info_mask_shared_by_type_available' > modifier to set the available scale. > Essentially, nothing changes to the driver's ABI. > > The main idea for this patch is to remove the AD7793 driver from > checkpatch's radar. There have been about ~3 attempts to fix/break the > 'in_voltage-voltage_scale_available' attribute, because checkpatch assumed > it to be an arithmetic operation and people were trying to change that. > +static int ad7793_read_avail(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + const int **vals, int *type, int *length, > + long mask) > { > struct ad7793_state *st = iio_priv(indio_dev); > > + switch (mask) { > + case IIO_CHAN_INFO_SCALE: > + *vals = (int *)st->scale_avail; > + *type = IIO_VAL_INT_PLUS_NANO; > + /* Values are stored in a 2D matrix */ > + *length = ARRAY_SIZE(st->scale_avail) * 2; > > + return IIO_AVAIL_LIST; > + } > > + return -EINVAL; Wouldn't be better move this under default case?
On Sat, 2020-03-21 at 21:37 +0200, Andy Shevchenko wrote: > [External] > > On Sat, Mar 21, 2020 at 11:08:02AM +0200, Alexandru Ardelean wrote: > > This change uses the read_avail and '.info_mask_shared_by_type_available' > > modifier to set the available scale. > > Essentially, nothing changes to the driver's ABI. > > > > The main idea for this patch is to remove the AD7793 driver from > > checkpatch's radar. There have been about ~3 attempts to fix/break the > > 'in_voltage-voltage_scale_available' attribute, because checkpatch assumed > > it to be an arithmetic operation and people were trying to change that. > > +static int ad7793_read_avail(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + const int **vals, int *type, int *length, > > + long mask) > > { > > struct ad7793_state *st = iio_priv(indio_dev); > > > > + switch (mask) { > > + case IIO_CHAN_INFO_SCALE: > > + *vals = (int *)st->scale_avail; > > + *type = IIO_VAL_INT_PLUS_NANO; > > + /* Values are stored in a 2D matrix */ > > + *length = ARRAY_SIZE(st->scale_avail) * 2; > > > > + return IIO_AVAIL_LIST; > > + } > > > > + return -EINVAL; > > Wouldn't be better move this under default case? > Ummm, sure. I'm a bit vague how we do from here since Jonathan accepted this and the patchset. I'll send a V3 of the whole set [in a few days max].
On Sat, 2020-03-21 at 16:57 +0000, Jonathan Cameron wrote: > [External] > > On Sat, 21 Mar 2020 11:08:02 +0200 > Alexandru Ardelean <alexandru.ardelean@analog.com> wrote: > > > This change uses the read_avail and '.info_mask_shared_by_type_available' > > modifier to set the available scale. > > Essentially, nothing changes to the driver's ABI. > > > > The main idea for this patch is to remove the AD7793 driver from > > checkpatch's radar. There have been about ~3 attempts to fix/break the > > 'in_voltage-voltage_scale_available' attribute, because checkpatch assumed > > it to be an arithmetic operation and people were trying to change that. > > > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> > At some point it might be nice to move the sampling_frequency over as well > but clearly not remotely urgent! I also thought about that now. But I decided to defer it; the patchset to do just this seemed big enough. I mostly want to avoid checkpatch fixes for this. It looks bad on our part if we get hit periodically on this, and don't do anything about it. > > Applied to the togreg branch of iio.git and pushed out as testing > for the autobuilders to poke at it. > > Thanks, > > Jonathan > > > --- > > drivers/iio/adc/ad7793.c | 53 +++++++++++++++++++++++++++------------- > > 1 file changed, 36 insertions(+), 17 deletions(-) > > > > diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c > > index 5592ae573e6b..fad98f1801db 100644 > > --- a/drivers/iio/adc/ad7793.c > > +++ b/drivers/iio/adc/ad7793.c > > @@ -354,29 +354,28 @@ static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( > > static IIO_CONST_ATTR_NAMED(sampling_frequency_available_ad7797, > > sampling_frequency_available, "123 62 50 33 17 16 12 10 8 6 4"); > > > > -static ssize_t ad7793_show_scale_available(struct device *dev, > > - struct device_attribute *attr, char *buf) > > +static int ad7793_read_avail(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + const int **vals, int *type, int *length, > > + long mask) > > { > > - struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > struct ad7793_state *st = iio_priv(indio_dev); > > - int i, len = 0; > > > > - for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) > > - len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0], > > - st->scale_avail[i][1]); > > + switch (mask) { > > + case IIO_CHAN_INFO_SCALE: > > + *vals = (int *)st->scale_avail; > > + *type = IIO_VAL_INT_PLUS_NANO; > > + /* Values are stored in a 2D matrix */ > > + *length = ARRAY_SIZE(st->scale_avail) * 2; > > > > - len += sprintf(buf + len, "\n"); > > + return IIO_AVAIL_LIST; > > + } > > > > - return len; > > + return -EINVAL; > > } > > > > -static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, > > - in_voltage-voltage_scale_available, S_IRUGO, > > - ad7793_show_scale_available, NULL, 0); > > - > > static struct attribute *ad7793_attributes[] = { > > &iio_const_attr_sampling_frequency_available.dev_attr.attr, > > - &iio_dev_attr_in_m_in_scale_available.dev_attr.attr, > > NULL > > }; > > > > @@ -534,6 +533,7 @@ static const struct iio_info ad7793_info = { > > .read_raw = &ad7793_read_raw, > > .write_raw = &ad7793_write_raw, > > .write_raw_get_fmt = &ad7793_write_raw_get_fmt, > > + .read_avail = ad7793_read_avail, > > .attrs = &ad7793_attribute_group, > > .validate_trigger = ad_sd_validate_trigger, > > }; > > @@ -547,7 +547,7 @@ static const struct iio_info ad7797_info = { > > }; > > > > #define __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ > > - _storagebits, _shift, _extend_name, _type, _mask_all) \ > > + _storagebits, _shift, _extend_name, _type, _mask_type_av, _mask_all) \ > > { \ > > .type = (_type), \ > > .differential = (_channel2 == -1 ? 0 : 1), \ > > @@ -559,6 +559,7 @@ static const struct iio_info ad7797_info = { > > .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > > BIT(IIO_CHAN_INFO_OFFSET), \ > > .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > > + .info_mask_shared_by_type_available = (_mask_type_av), \ > > .info_mask_shared_by_all = _mask_all, \ > > .scan_index = (_si), \ > > .scan_type = { \ > > @@ -574,23 +575,41 @@ static const struct iio_info ad7797_info = { > > _storagebits, _shift) \ > > __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ > > _storagebits, _shift, NULL, IIO_VOLTAGE, \ > > + BIT(IIO_CHAN_INFO_SCALE), \ > > BIT(IIO_CHAN_INFO_SAMP_FREQ)) > > > > #define AD7793_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ > > _storagebits, _shift) \ > > __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \ > > _storagebits, _shift, "shorted", IIO_VOLTAGE, \ > > + BIT(IIO_CHAN_INFO_SCALE), \ > > BIT(IIO_CHAN_INFO_SAMP_FREQ)) > > > > #define AD7793_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \ > > __AD7793_CHANNEL(_si, 0, -1, _address, _bits, \ > > _storagebits, _shift, NULL, IIO_TEMP, \ > > + 0, \ > > BIT(IIO_CHAN_INFO_SAMP_FREQ)) > > > > #define AD7793_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, > > \ > > _shift) \ > > __AD7793_CHANNEL(_si, _channel, -1, _address, _bits, \ > > _storagebits, _shift, "supply", IIO_VOLTAGE, \ > > + 0, \ > > + BIT(IIO_CHAN_INFO_SAMP_FREQ)) > > + > > +#define AD7797_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ > > + _storagebits, _shift) \ > > + __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ > > + _storagebits, _shift, NULL, IIO_VOLTAGE, \ > > + 0, \ > > + BIT(IIO_CHAN_INFO_SAMP_FREQ)) > > + > > +#define AD7797_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ > > + _storagebits, _shift) \ > > + __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \ > > + _storagebits, _shift, "shorted", IIO_VOLTAGE, \ > > + 0, \ > > BIT(IIO_CHAN_INFO_SAMP_FREQ)) > > > > #define DECLARE_AD7793_CHANNELS(_name, _b, _sb, _s) \ > > @@ -620,8 +639,8 @@ const struct iio_chan_spec _name##_channels[] = { \ > > > > #define DECLARE_AD7797_CHANNELS(_name, _b, _sb) \ > > const struct iio_chan_spec _name##_channels[] = { \ > > - AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ > > - AD7793_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ > > + AD7797_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ > > + AD7797_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ > > AD7793_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \ > > AD7793_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \ > > IIO_CHAN_SOFT_TIMESTAMP(4), \
On Sun, 22 Mar 2020 09:18:13 +0000 "Ardelean, Alexandru" <alexandru.Ardelean@analog.com> wrote: > On Sat, 2020-03-21 at 21:37 +0200, Andy Shevchenko wrote: > > [External] > > > > On Sat, Mar 21, 2020 at 11:08:02AM +0200, Alexandru Ardelean wrote: > > > This change uses the read_avail and '.info_mask_shared_by_type_available' > > > modifier to set the available scale. > > > Essentially, nothing changes to the driver's ABI. > > > > > > The main idea for this patch is to remove the AD7793 driver from > > > checkpatch's radar. There have been about ~3 attempts to fix/break the > > > 'in_voltage-voltage_scale_available' attribute, because checkpatch assumed > > > it to be an arithmetic operation and people were trying to change that. > > > +static int ad7793_read_avail(struct iio_dev *indio_dev, > > > + struct iio_chan_spec const *chan, > > > + const int **vals, int *type, int *length, > > > + long mask) > > > { > > > struct ad7793_state *st = iio_priv(indio_dev); > > > > > > + switch (mask) { > > > + case IIO_CHAN_INFO_SCALE: > > > + *vals = (int *)st->scale_avail; > > > + *type = IIO_VAL_INT_PLUS_NANO; > > > + /* Values are stored in a 2D matrix */ > > > + *length = ARRAY_SIZE(st->scale_avail) * 2; > > > > > > + return IIO_AVAIL_LIST; > > > + } > > > > > > + return -EINVAL; > > > > Wouldn't be better move this under default case? > > > > Ummm, sure. > I'm a bit vague how we do from here since Jonathan accepted this and the > patchset. > I'll send a V3 of the whole set [in a few days max]. I'll drop this last patch. Just resend this one with the change. Jonathan
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c index 5592ae573e6b..fad98f1801db 100644 --- a/drivers/iio/adc/ad7793.c +++ b/drivers/iio/adc/ad7793.c @@ -354,29 +354,28 @@ static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( static IIO_CONST_ATTR_NAMED(sampling_frequency_available_ad7797, sampling_frequency_available, "123 62 50 33 17 16 12 10 8 6 4"); -static ssize_t ad7793_show_scale_available(struct device *dev, - struct device_attribute *attr, char *buf) +static int ad7793_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) { - struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7793_state *st = iio_priv(indio_dev); - int i, len = 0; - for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) - len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0], - st->scale_avail[i][1]); + switch (mask) { + case IIO_CHAN_INFO_SCALE: + *vals = (int *)st->scale_avail; + *type = IIO_VAL_INT_PLUS_NANO; + /* Values are stored in a 2D matrix */ + *length = ARRAY_SIZE(st->scale_avail) * 2; - len += sprintf(buf + len, "\n"); + return IIO_AVAIL_LIST; + } - return len; + return -EINVAL; } -static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, - in_voltage-voltage_scale_available, S_IRUGO, - ad7793_show_scale_available, NULL, 0); - static struct attribute *ad7793_attributes[] = { &iio_const_attr_sampling_frequency_available.dev_attr.attr, - &iio_dev_attr_in_m_in_scale_available.dev_attr.attr, NULL }; @@ -534,6 +533,7 @@ static const struct iio_info ad7793_info = { .read_raw = &ad7793_read_raw, .write_raw = &ad7793_write_raw, .write_raw_get_fmt = &ad7793_write_raw_get_fmt, + .read_avail = ad7793_read_avail, .attrs = &ad7793_attribute_group, .validate_trigger = ad_sd_validate_trigger, }; @@ -547,7 +547,7 @@ static const struct iio_info ad7797_info = { }; #define __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ - _storagebits, _shift, _extend_name, _type, _mask_all) \ + _storagebits, _shift, _extend_name, _type, _mask_type_av, _mask_all) \ { \ .type = (_type), \ .differential = (_channel2 == -1 ? 0 : 1), \ @@ -559,6 +559,7 @@ static const struct iio_info ad7797_info = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_OFFSET), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_type_available = (_mask_type_av), \ .info_mask_shared_by_all = _mask_all, \ .scan_index = (_si), \ .scan_type = { \ @@ -574,23 +575,41 @@ static const struct iio_info ad7797_info = { _storagebits, _shift) \ __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ _storagebits, _shift, NULL, IIO_VOLTAGE, \ + BIT(IIO_CHAN_INFO_SCALE), \ BIT(IIO_CHAN_INFO_SAMP_FREQ)) #define AD7793_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ _storagebits, _shift) \ __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \ _storagebits, _shift, "shorted", IIO_VOLTAGE, \ + BIT(IIO_CHAN_INFO_SCALE), \ BIT(IIO_CHAN_INFO_SAMP_FREQ)) #define AD7793_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \ __AD7793_CHANNEL(_si, 0, -1, _address, _bits, \ _storagebits, _shift, NULL, IIO_TEMP, \ + 0, \ BIT(IIO_CHAN_INFO_SAMP_FREQ)) #define AD7793_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \ _shift) \ __AD7793_CHANNEL(_si, _channel, -1, _address, _bits, \ _storagebits, _shift, "supply", IIO_VOLTAGE, \ + 0, \ + BIT(IIO_CHAN_INFO_SAMP_FREQ)) + +#define AD7797_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ + _storagebits, _shift) \ + __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ + _storagebits, _shift, NULL, IIO_VOLTAGE, \ + 0, \ + BIT(IIO_CHAN_INFO_SAMP_FREQ)) + +#define AD7797_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ + _storagebits, _shift) \ + __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \ + _storagebits, _shift, "shorted", IIO_VOLTAGE, \ + 0, \ BIT(IIO_CHAN_INFO_SAMP_FREQ)) #define DECLARE_AD7793_CHANNELS(_name, _b, _sb, _s) \ @@ -620,8 +639,8 @@ const struct iio_chan_spec _name##_channels[] = { \ #define DECLARE_AD7797_CHANNELS(_name, _b, _sb) \ const struct iio_chan_spec _name##_channels[] = { \ - AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ - AD7793_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ + AD7797_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ + AD7797_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ AD7793_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \ AD7793_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \ IIO_CHAN_SOFT_TIMESTAMP(4), \
This change uses the read_avail and '.info_mask_shared_by_type_available' modifier to set the available scale. Essentially, nothing changes to the driver's ABI. The main idea for this patch is to remove the AD7793 driver from checkpatch's radar. There have been about ~3 attempts to fix/break the 'in_voltage-voltage_scale_available' attribute, because checkpatch assumed it to be an arithmetic operation and people were trying to change that. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> --- drivers/iio/adc/ad7793.c | 53 +++++++++++++++++++++++++++------------- 1 file changed, 36 insertions(+), 17 deletions(-)