diff mbox series

[net-next,v3,02/11] net: ethernet: ti: cpts: separate hw counter read from timecounter

Message ID 20200320194244.4703-3-grygorii.strashko@ti.com (mailing list archive)
State New, archived
Headers show
Series net: ethernet: ti: cpts: add irq and HW_TS_PUSH events | expand

Commit Message

Grygorii Strashko March 20, 2020, 7:42 p.m. UTC
Separate hw counter read from timecounter code:
- add CPTS context field to store current HW counter value
- move HW timestamp request and FIFO read code out of timecounter code
- convert cyc2time on event reception in cpts_fifo_read()
- call timecounter_read() in cpts_fifo_read() to update tk->cycle_last

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/net/ethernet/ti/cpts.c | 53 +++++++++++++++++-----------------
 drivers/net/ethernet/ti/cpts.h |  2 ++
 2 files changed, 29 insertions(+), 26 deletions(-)

Comments

Richard Cochran March 26, 2020, 2:18 p.m. UTC | #1
On Fri, Mar 20, 2020 at 09:42:35PM +0200, Grygorii Strashko wrote:
> Separate hw counter read from timecounter code:
> - add CPTS context field to store current HW counter value
> - move HW timestamp request and FIFO read code out of timecounter code
> - convert cyc2time on event reception in cpts_fifo_read()
> - call timecounter_read() in cpts_fifo_read() to update tk->cycle_last

This comment tells us WHAT the patch does, but does not help because
we can see that from the patch itself.  Instead, the comment should
tell us WHY is change is needed.

I was left scratching my head, with the question, what is the purpose
here?  Maybe the answer is to be found later on in the series.

Here is commit message pattern to follow that I learned from tglx:

1. context
2. problem
3. solution

For this patch, the sentence, "Separate hw counter read from
timecounter code" is #3.

Thanks,
Richard
Grygorii Strashko March 26, 2020, 8:14 p.m. UTC | #2
On 26/03/2020 16:18, Richard Cochran wrote:
> On Fri, Mar 20, 2020 at 09:42:35PM +0200, Grygorii Strashko wrote:
>> Separate hw counter read from timecounter code:
>> - add CPTS context field to store current HW counter value
>> - move HW timestamp request and FIFO read code out of timecounter code
>> - convert cyc2time on event reception in cpts_fifo_read()
>> - call timecounter_read() in cpts_fifo_read() to update tk->cycle_last
> 
> This comment tells us WHAT the patch does, but does not help because
> we can see that from the patch itself.  Instead, the comment should
> tell us WHY is change is needed.
> 
> I was left scratching my head, with the question, what is the purpose
> here?  Maybe the answer is to be found later on in the series.
> 
> Here is commit message pattern to follow that I learned from tglx:
> 
> 1. context
> 2. problem
> 3. solution
> 
> For this patch, the sentence, "Separate hw counter read from
> timecounter code" is #3.

Sorry, will update.
diff mbox series

Patch

diff --git a/drivers/net/ethernet/ti/cpts.c b/drivers/net/ethernet/ti/cpts.c
index f07b40504e5b..6a1844cd23ff 100644
--- a/drivers/net/ethernet/ti/cpts.c
+++ b/drivers/net/ethernet/ti/cpts.c
@@ -112,10 +112,8 @@  static bool cpts_match_tx_ts(struct cpts *cpts, struct cpts_event *event)
 					(struct cpts_skb_cb_data *)skb->cb;
 
 		if (cpts_match(skb, class, seqid, mtype)) {
-			u64 ns = timecounter_cyc2time(&cpts->tc, event->low);
-
 			memset(&ssh, 0, sizeof(ssh));
-			ssh.hwtstamp = ns_to_ktime(ns);
+			ssh.hwtstamp = ns_to_ktime(event->timestamp);
 			skb_tstamp_tx(skb, &ssh);
 			found = true;
 			__skb_unlink(skb, &cpts->txq);
@@ -158,8 +156,16 @@  static int cpts_fifo_read(struct cpts *cpts, int match)
 		event->tmo = jiffies + 2;
 		event->high = hi;
 		event->low = lo;
+		event->timestamp = timecounter_cyc2time(&cpts->tc, event->low);
 		type = event_type(event);
+
+		dev_dbg(cpts->dev, "CPTS_EV: %d high:%08X low:%08x\n",
+			type, event->high, event->low);
 		switch (type) {
+		case CPTS_EV_PUSH:
+			WRITE_ONCE(cpts->cur_timestamp, lo);
+			timecounter_read(&cpts->tc);
+			break;
 		case CPTS_EV_TX:
 			if (cpts_match_tx_ts(cpts, event)) {
 				/* if the new event matches an existing skb,
@@ -168,7 +174,6 @@  static int cpts_fifo_read(struct cpts *cpts, int match)
 				break;
 			}
 			/* fall through */
-		case CPTS_EV_PUSH:
 		case CPTS_EV_RX:
 			list_del_init(&event->list);
 			list_add_tail(&event->list, &cpts->events);
@@ -189,26 +194,17 @@  static int cpts_fifo_read(struct cpts *cpts, int match)
 
 static u64 cpts_systim_read(const struct cyclecounter *cc)
 {
-	u64 val = 0;
-	struct cpts_event *event;
-	struct list_head *this, *next;
 	struct cpts *cpts = container_of(cc, struct cpts, cc);
 
-	cpts_write32(cpts, TS_PUSH, ts_push);
-	if (cpts_fifo_read(cpts, CPTS_EV_PUSH))
-		dev_err(cpts->dev, "cpts: unable to obtain a time stamp\n");
+	return READ_ONCE(cpts->cur_timestamp);
+}
 
-	list_for_each_safe(this, next, &cpts->events) {
-		event = list_entry(this, struct cpts_event, list);
-		if (event_type(event) == CPTS_EV_PUSH) {
-			list_del_init(&event->list);
-			list_add(&event->list, &cpts->pool);
-			val = event->low;
-			break;
-		}
-	}
+static void cpts_update_cur_time(struct cpts *cpts, int match)
+{
+	cpts_write32(cpts, TS_PUSH, ts_push);
 
-	return val;
+	if (cpts_fifo_read(cpts, match) && match != -1)
+		dev_err(cpts->dev, "cpts: unable to obtain a time stamp\n");
 }
 
 /* PTP clock operations */
@@ -232,7 +228,7 @@  static int cpts_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
 
 	spin_lock_irqsave(&cpts->lock, flags);
 
-	timecounter_read(&cpts->tc);
+	cpts_update_cur_time(cpts, CPTS_EV_PUSH);
 
 	cpts->cc.mult = neg_adj ? mult - diff : mult + diff;
 
@@ -260,6 +256,9 @@  static int cpts_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
 	struct cpts *cpts = container_of(ptp, struct cpts, info);
 
 	spin_lock_irqsave(&cpts->lock, flags);
+
+	cpts_update_cur_time(cpts, CPTS_EV_PUSH);
+
 	ns = timecounter_read(&cpts->tc);
 	spin_unlock_irqrestore(&cpts->lock, flags);
 
@@ -294,11 +293,14 @@  static long cpts_overflow_check(struct ptp_clock_info *ptp)
 {
 	struct cpts *cpts = container_of(ptp, struct cpts, info);
 	unsigned long delay = cpts->ov_check_period;
-	struct timespec64 ts;
 	unsigned long flags;
+	u64 ns;
 
 	spin_lock_irqsave(&cpts->lock, flags);
-	ts = ns_to_timespec64(timecounter_read(&cpts->tc));
+
+	cpts_update_cur_time(cpts, -1);
+
+	ns = timecounter_read(&cpts->tc);
 
 	if (!skb_queue_empty(&cpts->txq)) {
 		cpts_purge_txq(cpts);
@@ -307,8 +309,7 @@  static long cpts_overflow_check(struct ptp_clock_info *ptp)
 	}
 	spin_unlock_irqrestore(&cpts->lock, flags);
 
-	dev_dbg(cpts->dev, "cpts overflow check at %lld.%09ld\n",
-		(long long)ts.tv_sec, ts.tv_nsec);
+	dev_dbg(cpts->dev, "cpts overflow check at %lld\n", ns);
 	return (long)delay;
 }
 
@@ -390,7 +391,7 @@  static u64 cpts_find_ts(struct cpts *cpts, struct sk_buff *skb, int ev_type)
 		seqid = (event->high >> SEQUENCE_ID_SHIFT) & SEQUENCE_ID_MASK;
 		if (ev_type == event_type(event) &&
 		    cpts_match(skb, class, seqid, mtype)) {
-			ns = timecounter_cyc2time(&cpts->tc, event->low);
+			ns = event->timestamp;
 			list_del_init(&event->list);
 			list_add(&event->list, &cpts->pool);
 			break;
diff --git a/drivers/net/ethernet/ti/cpts.h b/drivers/net/ethernet/ti/cpts.h
index bb997c11ee15..32ecd1ce4d3b 100644
--- a/drivers/net/ethernet/ti/cpts.h
+++ b/drivers/net/ethernet/ti/cpts.h
@@ -94,6 +94,7 @@  struct cpts_event {
 	unsigned long tmo;
 	u32 high;
 	u32 low;
+	u64 timestamp;
 };
 
 struct cpts {
@@ -114,6 +115,7 @@  struct cpts {
 	struct cpts_event pool_data[CPTS_MAX_EVENTS];
 	unsigned long ov_check_period;
 	struct sk_buff_head txq;
+	u64 cur_timestamp;
 };
 
 void cpts_rx_timestamp(struct cpts *cpts, struct sk_buff *skb);