| Message ID | 20200409141401.321222-3-kamel.bouhara@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Atmel TCB capture driver | expand |
On Thu, 9 Apr 2020 16:14:00 +0200, Kamel Bouhara wrote: > Describe the devicetree binding for the ATMEL TCB counter. Each counter > blocks exposes three independent counters. > > However, when configured in quadrature decoder, both channel <0> and <1> > are required for speed/position and rotation capture (yet only the > position is captured). > > Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> > --- > .../bindings/counter/atmel-tcb-capture.yaml | 35 +++++++++++++++++++ > 1 file changed, 35 insertions(+) > create mode 100644 Documentation/devicetree/bindings/counter/atmel-tcb-capture.yaml > My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/counter/atmel-tcb-capture.example.dts:20.17-32: Warning (reg_format): /example-0/timer@f800c000/timer@0:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/counter/atmel-tcb-capture.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/counter/atmel-tcb-capture.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/counter/atmel-tcb-capture.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/counter/atmel-tcb-capture.example.dts:18.27-21.15: Warning (avoid_default_addr_size): /example-0/timer@f800c000/timer@0: Relying on default #address-cells value Documentation/devicetree/bindings/counter/atmel-tcb-capture.example.dts:18.27-21.15: Warning (avoid_default_addr_size): /example-0/timer@f800c000/timer@0: Relying on default #size-cells value See https://patchwork.ozlabs.org/patch/1268623 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/counter/atmel-tcb-capture.yaml b/Documentation/devicetree/bindings/counter/atmel-tcb-capture.yaml new file mode 100644 index 000000000000..ca8b31c1f869 --- /dev/null +++ b/Documentation/devicetree/bindings/counter/atmel-tcb-capture.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/counter/atmel-tcb-capture.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel TCB Counter + +maintainers: + - Kamel Bouhara <kamel.bouhara@bootlin.com> + +properties: + compatible: + const: "atmel,tcb-capture" + + reg: + description: TCB capture channel to register as counter device. + Each channel is independent therefore only one channel is + registered by default execpt for the QDEC mode where both TCB0's + channels <0> and <1> are required. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + tcb0: timer@f800c000 { + qdec: timer@0 { + compatible = "atmel,tcb-capture"; + reg = <0>, <1>; + }; + };
Describe the devicetree binding for the ATMEL TCB counter. Each counter blocks exposes three independent counters. However, when configured in quadrature decoder, both channel <0> and <1> are required for speed/position and rotation capture (yet only the position is captured). Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> --- .../bindings/counter/atmel-tcb-capture.yaml | 35 +++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/counter/atmel-tcb-capture.yaml