diff mbox series

[V3,1/4] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format

Message ID 1587993846-30773-2-git-send-email-jprakash@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series [V3,1/4] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format | expand

Commit Message

Jishnu Prakash April 27, 2020, 1:24 p.m. UTC
Convert the adc bindings from .txt to .yaml format.

Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
---
 .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 173 --------------
 .../bindings/iio/adc/qcom,spmi-vadc.yaml           | 252 +++++++++++++++++++++
 2 files changed, 252 insertions(+), 173 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
 create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml

Comments

Amit Kucheria May 5, 2020, 10:03 a.m. UTC | #1
Hi Jishnu,

It is nice to cc reviewers in the followup versions. Just noticed this.

On Mon, Apr 27, 2020 at 6:55 PM Jishnu Prakash <jprakash@codeaurora.org> wrote:
>
> Convert the adc bindings from .txt to .yaml format.
>
> Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>

Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>


> ---
>  .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 173 --------------
>  .../bindings/iio/adc/qcom,spmi-vadc.yaml           | 252 +++++++++++++++++++++
>  2 files changed, 252 insertions(+), 173 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> deleted file mode 100644
> index c878768..0000000
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> +++ /dev/null
> @@ -1,173 +0,0 @@
> -Qualcomm's SPMI PMIC ADC
> -
> -- SPMI PMIC voltage ADC (VADC) provides interface to clients to read
> -  voltage. The VADC is a 15-bit sigma-delta ADC.
> -- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
> -  voltage. The VADC is a 16-bit sigma-delta ADC.
> -
> -VADC node:
> -
> -- compatible:
> -    Usage: required
> -    Value type: <string>
> -    Definition: Should contain "qcom,spmi-vadc".
> -                Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
> -                Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
> -                Should contain "qcom,pms405-adc" for PMS405 PMIC
> -
> -- reg:
> -    Usage: required
> -    Value type: <prop-encoded-array>
> -    Definition: VADC base address in the SPMI PMIC register map.
> -
> -- #address-cells:
> -    Usage: required
> -    Value type: <u32>
> -    Definition: Must be one. Child node 'reg' property should define ADC
> -            channel number.
> -
> -- #size-cells:
> -    Usage: required
> -    Value type: <u32>
> -    Definition: Must be zero.
> -
> -- #io-channel-cells:
> -    Usage: required
> -    Value type: <u32>
> -    Definition: Must be one. For details about IIO bindings see:
> -            Documentation/devicetree/bindings/iio/iio-bindings.txt
> -
> -- interrupts:
> -    Usage: optional
> -    Value type: <prop-encoded-array>
> -    Definition: End of conversion interrupt.
> -
> -Channel node properties:
> -
> -- reg:
> -    Usage: required
> -    Value type: <u32>
> -    Definition: ADC channel number.
> -            See include/dt-bindings/iio/qcom,spmi-vadc.h
> -
> -- label:
> -    Usage: required for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2"
> -    Value type: <empty>
> -    Definition: ADC input of the platform as seen in the schematics.
> -            For thermistor inputs connected to generic AMUX or GPIO inputs
> -            these can vary across platform for the same pins. Hence select
> -            the platform schematics name for this channel.
> -
> -- qcom,decimation:
> -    Usage: optional
> -    Value type: <u32>
> -    Definition: This parameter is used to decrease ADC sampling rate.
> -            Quicker measurements can be made by reducing decimation ratio.
> -            - For compatible property "qcom,spmi-vadc", valid values are
> -              512, 1024, 2048, 4096. If property is not found, default value
> -              of 512 will be used.
> -            - For compatible property "qcom,spmi-adc5", valid values are 250, 420
> -              and 840. If property is not found, default value of 840 is used.
> -            - For compatible property "qcom,spmi-adc-rev2", valid values are 256,
> -              512 and 1024. If property is not present, default value is 1024.
> -
> -- qcom,pre-scaling:
> -    Usage: optional
> -    Value type: <u32 array>
> -    Definition: Used for scaling the channel input signal before the signal is
> -            fed to VADC. The configuration for this node is to know the
> -            pre-determined ratio and use it for post scaling. Select one from
> -            the following options.
> -            <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
> -            If property is not found default value depending on chip will be used.
> -
> -- qcom,ratiometric:
> -    Usage: optional
> -    Value type: <empty>
> -    Definition: Channel calibration type.
> -            - For compatible property "qcom,spmi-vadc", if this property is
> -              specified VADC will use the VDD reference (1.8V) and GND for
> -              channel calibration. If property is not found, channel will be
> -              calibrated with 0.625V and 1.25V reference channels, also
> -              known as absolute calibration.
> -            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
> -              if this property is specified VADC will use the VDD reference
> -              (1.875V) and GND for channel calibration. If property is not found,
> -              channel will be calibrated with 0V and 1.25V reference channels,
> -              also known as absolute calibration.
> -
> -- qcom,hw-settle-time:
> -    Usage: optional
> -    Value type: <u32>
> -    Definition: Time between AMUX getting configured and the ADC starting
> -            conversion. The 'hw_settle_time' is an index used from valid values
> -            and programmed in hardware to achieve the hardware settling delay.
> -            - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2",
> -              Delay = 100us * (hw_settle_time) for hw_settle_time < 11,
> -              and 2ms * (hw_settle_time - 10) otherwise.
> -              Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
> -              900 us and 1, 2, 4, 6, 8, 10 ms.
> -              If property is not found, channel will use 0us.
> -            - For compatible property "qcom,spmi-adc5", delay = 15us for
> -              value 0, 100us * (value) for values < 11,
> -              and 2ms * (value - 10) otherwise.
> -              Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800,
> -              900 us and 1, 2, 4, 6, 8, 10 ms
> -              Certain controller digital versions have valid values of
> -              15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
> -              If property is not found, channel will use 15us.
> -
> -- qcom,avg-samples:
> -    Usage: optional
> -    Value type: <u32>
> -    Definition: Number of samples to be used for measurement.
> -            Averaging provides the option to obtain a single measurement
> -            from the ADC that is an average of multiple samples. The value
> -            selected is 2^(value).
> -            - For compatible property "qcom,spmi-vadc", valid values
> -              are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
> -              If property is not found, 1 sample will be used.
> -            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
> -              valid values are: 1, 2, 4, 8, 16
> -              If property is not found, 1 sample will be used.
> -
> -NOTE:
> -
> -For compatible property "qcom,spmi-vadc" following channels, also known as
> -reference point channels, are used for result calibration and their channel
> -configuration nodes should be defined:
> -VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
> -VADC_GND_REF and VADC_VDD_VADC.
> -
> -Example:
> -
> -#include <dt-bindings/iio/qcom,spmi-vadc.h>
> -#include <linux/irq.h>
> -/* ... */
> -
> -       /* VADC node */
> -       pmic_vadc: vadc@3100 {
> -               compatible = "qcom,spmi-vadc";
> -               reg = <0x3100>;
> -               interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> -               #address-cells = <1>;
> -               #size-cells = <0>;
> -               #io-channel-cells = <1>;
> -               io-channel-ranges;
> -
> -               /* Channel node */
> -               adc-chan@VADC_LR_MUX10_USB_ID {
> -                       reg = <VADC_LR_MUX10_USB_ID>;
> -                       qcom,decimation = <512>;
> -                       qcom,ratiometric;
> -                       qcom,hw-settle-time = <200>;
> -                       qcom,avg-samples = <1>;
> -                       qcom,pre-scaling = <1 3>;
> -               };
> -       };
> -
> -       /* IIO client node */
> -       usb {
> -               io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>;
> -               io-channel-names = "vadc";
> -       };
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> new file mode 100644
> index 0000000..de8d243
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> @@ -0,0 +1,252 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm's SPMI PMIC ADC
> +
> +maintainers:
> +  - Andy Gross <agross@kernel.org>
> +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description: |
> +  SPMI PMIC voltage ADC (VADC) provides interface to clients to read
> +  voltage. The VADC is a 15-bit sigma-delta ADC.
> +  SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
> +  voltage. The VADC is a 16-bit sigma-delta ADC.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: qcom,pms405-adc
> +          - const: qcom,spmi-adc-rev2
> +
> +      - items:
> +        - enum:
> +          - qcom,spmi-vadc
> +          - qcom,spmi-adc5
> +          - qcom,spmi-adc-rev2
> +
> +  reg:
> +    description: VADC base address in the SPMI PMIC register map
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  '#io-channel-cells':
> +    const: 1
> +
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      End of conversion interrupt.
> +
> +required:
> +  - compatible
> +  - reg
> +  - '#address-cells'
> +  - '#size-cells'
> +  - '#io-channel-cells'
> +
> +patternProperties:
> +  "^.*@[0-9a-f]+$":
> +    type: object
> +    description: |
> +      Represents the external channels which are connected to the ADC.
> +      For compatible property "qcom,spmi-vadc" following channels, also known as
> +      reference point channels, are used for result calibration and their channel
> +      configuration nodes should be defined:
> +      VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
> +      VADC_GND_REF and VADC_VDD_VADC.
> +
> +    properties:
> +      reg:
> +        description: |
> +          ADC channel number.
> +          See include/dt-bindings/iio/qcom,spmi-vadc.h
> +
> +      label:
> +        $ref: /schemas/types.yaml#/definitions/string
> +        description: |
> +            ADC input of the platform as seen in the schematics.
> +            For thermistor inputs connected to generic AMUX or GPIO inputs
> +            these can vary across platform for the same pins. Hence select
> +            the platform schematics name for this channel.
> +
> +      qcom,decimation:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: |
> +            This parameter is used to decrease ADC sampling rate.
> +            Quicker measurements can be made by reducing decimation ratio.
> +
> +      qcom,pre-scaling:
> +        description: |
> +            Used for scaling the channel input signal before the signal is
> +            fed to VADC. The configuration for this node is to know the
> +            pre-determined ratio and use it for post scaling. It is a pair of
> +            integers, denoting the numerator and denominator of the fraction by which
> +            input signal is multiplied. For example, <1 3> indicates the signal is scaled
> +            down to 1/3 of its value before ADC measurement.
> +            If property is not found default value depending on chip will be used.
> +        allOf:
> +          - $ref: /schemas/types.yaml#/definitions/uint32-array
> +        oneOf:
> +          - items:
> +            - const: 1
> +            - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
> +
> +          - items:
> +            - const: 10
> +            - const: 81
> +
> +      qcom,ratiometric:
> +        description: |
> +            Channel calibration type.
> +            - For compatible property "qcom,spmi-vadc", if this property is
> +              specified VADC will use the VDD reference (1.8V) and GND for
> +              channel calibration. If property is not found, channel will be
> +              calibrated with 0.625V and 1.25V reference channels, also
> +              known as absolute calibration.
> +            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
> +              if this property is specified VADC will use the VDD reference (1.875V)
> +              and GND for channel calibration. If property is not found, channel
> +              will be calibrated with 0V and 1.25V reference channels, also known
> +              as absolute calibration.
> +        type: boolean
> +
> +      qcom,hw-settle-time:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: |
> +            Time between AMUX getting configured and the ADC starting
> +            conversion. The 'hw_settle_time' is an index used from valid values
> +            and programmed in hardware to achieve the hardware settling delay.
> +
> +      qcom,avg-samples:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: |
> +            Number of samples to be used for measurement.
> +            Averaging provides the option to obtain a single measurement
> +            from the ADC that is an average of multiple samples. The value
> +            selected is 2^(value).
> +
> +    required:
> +      - reg
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,spmi-vadc
> +
> +    then:
> +      patternProperties:
> +        "^.*@[0-9a-f]+$":
> +          properties:
> +            qcom,decimation:
> +              enum: [ 512, 1024, 2048, 4096 ]
> +              default: 512
> +
> +            qcom,hw-settle-time:
> +              enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
> +                      4, 6, 8, 10 ]
> +              default: 0
> +
> +            qcom,avg-samples:
> +              enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 ]
> +              default: 1
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,spmi-adc-rev2
> +
> +    then:
> +      patternProperties:
> +        "^.*@[0-9a-f]+$":
> +          properties:
> +            qcom,decimation:
> +              enum: [ 256, 512, 1024 ]
> +              default: 1024
> +
> +            qcom,hw-settle-time:
> +              enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
> +                      4, 6, 8, 10 ]
> +              default: 0
> +
> +            qcom,avg-samples:
> +              enum: [ 1, 2, 4, 8, 16 ]
> +              default: 1
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,spmi-adc5
> +
> +    then:
> +      patternProperties:
> +        "^.*@[0-9a-f]+$":
> +          properties:
> +            qcom,decimation:
> +              enum: [ 250, 420, 840 ]
> +              default: 840
> +
> +            qcom,hw-settle-time:
> +              enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
> +                      4, 6, 8, 10, 16, 32, 64, 128 ]
> +              default: 15
> +
> +            qcom,avg-samples:
> +              enum: [ 1, 2, 4, 8, 16 ]
> +              default: 1
> +
> +examples:
> +  - |
> +    spmi_bus {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      /* VADC node */
> +      pmic_vadc: adc@3100 {
> +        compatible = "qcom,spmi-vadc";
> +        reg = <0x3100>;
> +        interrupts = <0x0 0x31 0x0 0x1>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        #io-channel-cells = <1>;
> +        io-channel-ranges;
> +
> +        /* Channel node */
> +        adc-chan@39 {
> +          reg = <0x39>;
> +          qcom,decimation = <512>;
> +          qcom,ratiometric;
> +          qcom,hw-settle-time = <200>;
> +          qcom,avg-samples = <1>;
> +          qcom,pre-scaling = <1 3>;
> +        };
> +
> +        adc-chan@9 {
> +          reg = <0x9>;
> +        };
> +
> +        adc-chan@a {
> +          reg = <0xa>;
> +        };
> +
> +        adc-chan@e {
> +          reg = <0xe>;
> +        };
> +
> +        adc-chan@f {
> +          reg = <0xf>;
> +        };
> +      };
> +    };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
Rob Herring (Arm) May 12, 2020, 1:49 a.m. UTC | #2
On Mon, 27 Apr 2020 18:54:02 +0530, Jishnu Prakash wrote:
> Convert the adc bindings from .txt to .yaml format.
> 
> Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
> ---
>  .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 173 --------------
>  .../bindings/iio/adc/qcom,spmi-vadc.yaml           | 252 +++++++++++++++++++++
>  2 files changed, 252 insertions(+), 173 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
deleted file mode 100644
index c878768..0000000
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
+++ /dev/null
@@ -1,173 +0,0 @@ 
-Qualcomm's SPMI PMIC ADC
-
-- SPMI PMIC voltage ADC (VADC) provides interface to clients to read
-  voltage. The VADC is a 15-bit sigma-delta ADC.
-- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
-  voltage. The VADC is a 16-bit sigma-delta ADC.
-
-VADC node:
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,spmi-vadc".
-                Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
-                Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
-                Should contain "qcom,pms405-adc" for PMS405 PMIC
-
-- reg:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: VADC base address in the SPMI PMIC register map.
-
-- #address-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Must be one. Child node 'reg' property should define ADC
-            channel number.
-
-- #size-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Must be zero.
-
-- #io-channel-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Must be one. For details about IIO bindings see:
-            Documentation/devicetree/bindings/iio/iio-bindings.txt
-
-- interrupts:
-    Usage: optional
-    Value type: <prop-encoded-array>
-    Definition: End of conversion interrupt.
-
-Channel node properties:
-
-- reg:
-    Usage: required
-    Value type: <u32>
-    Definition: ADC channel number.
-            See include/dt-bindings/iio/qcom,spmi-vadc.h
-
-- label:
-    Usage: required for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2"
-    Value type: <empty>
-    Definition: ADC input of the platform as seen in the schematics.
-            For thermistor inputs connected to generic AMUX or GPIO inputs
-            these can vary across platform for the same pins. Hence select
-            the platform schematics name for this channel.
-
-- qcom,decimation:
-    Usage: optional
-    Value type: <u32>
-    Definition: This parameter is used to decrease ADC sampling rate.
-            Quicker measurements can be made by reducing decimation ratio.
-            - For compatible property "qcom,spmi-vadc", valid values are
-              512, 1024, 2048, 4096. If property is not found, default value
-              of 512 will be used.
-            - For compatible property "qcom,spmi-adc5", valid values are 250, 420
-              and 840. If property is not found, default value of 840 is used.
-            - For compatible property "qcom,spmi-adc-rev2", valid values are 256,
-              512 and 1024. If property is not present, default value is 1024.
-
-- qcom,pre-scaling:
-    Usage: optional
-    Value type: <u32 array>
-    Definition: Used for scaling the channel input signal before the signal is
-            fed to VADC. The configuration for this node is to know the
-            pre-determined ratio and use it for post scaling. Select one from
-            the following options.
-            <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
-            If property is not found default value depending on chip will be used.
-
-- qcom,ratiometric:
-    Usage: optional
-    Value type: <empty>
-    Definition: Channel calibration type.
-            - For compatible property "qcom,spmi-vadc", if this property is
-              specified VADC will use the VDD reference (1.8V) and GND for
-              channel calibration. If property is not found, channel will be
-              calibrated with 0.625V and 1.25V reference channels, also
-              known as absolute calibration.
-            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
-              if this property is specified VADC will use the VDD reference
-              (1.875V) and GND for channel calibration. If property is not found,
-              channel will be calibrated with 0V and 1.25V reference channels,
-              also known as absolute calibration.
-
-- qcom,hw-settle-time:
-    Usage: optional
-    Value type: <u32>
-    Definition: Time between AMUX getting configured and the ADC starting
-            conversion. The 'hw_settle_time' is an index used from valid values
-            and programmed in hardware to achieve the hardware settling delay.
-            - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2",
-              Delay = 100us * (hw_settle_time) for hw_settle_time < 11,
-              and 2ms * (hw_settle_time - 10) otherwise.
-              Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
-              900 us and 1, 2, 4, 6, 8, 10 ms.
-              If property is not found, channel will use 0us.
-            - For compatible property "qcom,spmi-adc5", delay = 15us for
-              value 0, 100us * (value) for values < 11,
-              and 2ms * (value - 10) otherwise.
-              Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800,
-              900 us and 1, 2, 4, 6, 8, 10 ms
-              Certain controller digital versions have valid values of
-              15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
-              If property is not found, channel will use 15us.
-
-- qcom,avg-samples:
-    Usage: optional
-    Value type: <u32>
-    Definition: Number of samples to be used for measurement.
-            Averaging provides the option to obtain a single measurement
-            from the ADC that is an average of multiple samples. The value
-            selected is 2^(value).
-            - For compatible property "qcom,spmi-vadc", valid values
-              are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
-              If property is not found, 1 sample will be used.
-            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
-              valid values are: 1, 2, 4, 8, 16
-              If property is not found, 1 sample will be used.
-
-NOTE:
-
-For compatible property "qcom,spmi-vadc" following channels, also known as
-reference point channels, are used for result calibration and their channel
-configuration nodes should be defined:
-VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
-VADC_GND_REF and VADC_VDD_VADC.
-
-Example:
-
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <linux/irq.h>
-/* ... */
-
-	/* VADC node */
-	pmic_vadc: vadc@3100 {
-		compatible = "qcom,spmi-vadc";
-		reg = <0x3100>;
-		interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-
-		/* Channel node */
-		adc-chan@VADC_LR_MUX10_USB_ID {
-			reg = <VADC_LR_MUX10_USB_ID>;
-			qcom,decimation = <512>;
-			qcom,ratiometric;
-			qcom,hw-settle-time = <200>;
-			qcom,avg-samples = <1>;
-			qcom,pre-scaling = <1 3>;
-		};
-	};
-
-	/* IIO client node */
-	usb {
-		io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>;
-		io-channel-names = "vadc";
-	};
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
new file mode 100644
index 0000000..de8d243
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -0,0 +1,252 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  SPMI PMIC voltage ADC (VADC) provides interface to clients to read
+  voltage. The VADC is a 15-bit sigma-delta ADC.
+  SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
+  voltage. The VADC is a 16-bit sigma-delta ADC.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qcom,pms405-adc
+          - const: qcom,spmi-adc-rev2
+
+      - items:
+        - enum:
+          - qcom,spmi-vadc
+          - qcom,spmi-adc5
+          - qcom,spmi-adc-rev2
+
+  reg:
+    description: VADC base address in the SPMI PMIC register map
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#io-channel-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      End of conversion interrupt.
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - '#io-channel-cells'
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+      For compatible property "qcom,spmi-vadc" following channels, also known as
+      reference point channels, are used for result calibration and their channel
+      configuration nodes should be defined:
+      VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
+      VADC_GND_REF and VADC_VDD_VADC.
+
+    properties:
+      reg:
+        description: |
+          ADC channel number.
+          See include/dt-bindings/iio/qcom,spmi-vadc.h
+
+      label:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: |
+            ADC input of the platform as seen in the schematics.
+            For thermistor inputs connected to generic AMUX or GPIO inputs
+            these can vary across platform for the same pins. Hence select
+            the platform schematics name for this channel.
+
+      qcom,decimation:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            This parameter is used to decrease ADC sampling rate.
+            Quicker measurements can be made by reducing decimation ratio.
+
+      qcom,pre-scaling:
+        description: |
+            Used for scaling the channel input signal before the signal is
+            fed to VADC. The configuration for this node is to know the
+            pre-determined ratio and use it for post scaling. It is a pair of
+            integers, denoting the numerator and denominator of the fraction by which
+            input signal is multiplied. For example, <1 3> indicates the signal is scaled
+            down to 1/3 of its value before ADC measurement.
+            If property is not found default value depending on chip will be used.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        oneOf:
+          - items:
+            - const: 1
+            - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+
+          - items:
+            - const: 10
+            - const: 81
+
+      qcom,ratiometric:
+        description: |
+            Channel calibration type.
+            - For compatible property "qcom,spmi-vadc", if this property is
+              specified VADC will use the VDD reference (1.8V) and GND for
+              channel calibration. If property is not found, channel will be
+              calibrated with 0.625V and 1.25V reference channels, also
+              known as absolute calibration.
+            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
+              if this property is specified VADC will use the VDD reference (1.875V)
+              and GND for channel calibration. If property is not found, channel
+              will be calibrated with 0V and 1.25V reference channels, also known
+              as absolute calibration.
+        type: boolean
+
+      qcom,hw-settle-time:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            Time between AMUX getting configured and the ADC starting
+            conversion. The 'hw_settle_time' is an index used from valid values
+            and programmed in hardware to achieve the hardware settling delay.
+
+      qcom,avg-samples:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            Number of samples to be used for measurement.
+            Averaging provides the option to obtain a single measurement
+            from the ADC that is an average of multiple samples. The value
+            selected is 2^(value).
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-vadc
+
+    then:
+      patternProperties:
+        "^.*@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 512, 1024, 2048, 4096 ]
+              default: 512
+
+            qcom,hw-settle-time:
+              enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
+                      4, 6, 8, 10 ]
+              default: 0
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 ]
+              default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-rev2
+
+    then:
+      patternProperties:
+        "^.*@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 256, 512, 1024 ]
+              default: 1024
+
+            qcom,hw-settle-time:
+              enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
+                      4, 6, 8, 10 ]
+              default: 0
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16 ]
+              default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc5
+
+    then:
+      patternProperties:
+        "^.*@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 250, 420, 840 ]
+              default: 840
+
+            qcom,hw-settle-time:
+              enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
+                      4, 6, 8, 10, 16, 32, 64, 128 ]
+              default: 15
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16 ]
+              default: 1
+
+examples:
+  - |
+    spmi_bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      /* VADC node */
+      pmic_vadc: adc@3100 {
+        compatible = "qcom,spmi-vadc";
+        reg = <0x3100>;
+        interrupts = <0x0 0x31 0x0 0x1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #io-channel-cells = <1>;
+        io-channel-ranges;
+
+        /* Channel node */
+        adc-chan@39 {
+          reg = <0x39>;
+          qcom,decimation = <512>;
+          qcom,ratiometric;
+          qcom,hw-settle-time = <200>;
+          qcom,avg-samples = <1>;
+          qcom,pre-scaling = <1 3>;
+        };
+
+        adc-chan@9 {
+          reg = <0x9>;
+        };
+
+        adc-chan@a {
+          reg = <0xa>;
+        };
+
+        adc-chan@e {
+          reg = <0xe>;
+        };
+
+        adc-chan@f {
+          reg = <0xf>;
+        };
+      };
+    };