diff mbox series

[RFC,3/6] dt-bindings: display/bridge/nwl-dsi: Drop mux handling

Message ID 9884c56219e9bdbeec179c27ea2b734dbb5f1289.1589548223.git.agx@sigxcpu.org (mailing list archive)
State New, archived
Headers show
Series drm/bridge: Add mux input selection bridge | expand

Commit Message

Guido Günther May 15, 2020, 1:12 p.m. UTC
No need to encode the SoC specifics in the bridge driver. For the
imx8mq we can use the mux-input-bridge.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
 .../devicetree/bindings/display/bridge/nwl-dsi.yaml         | 6 ------
 1 file changed, 6 deletions(-)

Comments

Rob Herring (Arm) May 28, 2020, 7:59 p.m. UTC | #1
On Fri, May 15, 2020 at 03:12:12PM +0200, Guido Günther wrote:
> No need to encode the SoC specifics in the bridge driver. For the
> imx8mq we can use the mux-input-bridge.

You can't just change bindings like this. You'd still have to support 
the "old" way. But IMO, this way is the right way.

> 
> Signed-off-by: Guido Günther <agx@sigxcpu.org>
> ---
>  .../devicetree/bindings/display/bridge/nwl-dsi.yaml         | 6 ------
>  1 file changed, 6 deletions(-)
Guido Günther May 29, 2020, 4:23 a.m. UTC | #2
Hi Rob,
On Thu, May 28, 2020 at 01:59:14PM -0600, Rob Herring wrote:
> On Fri, May 15, 2020 at 03:12:12PM +0200, Guido Günther wrote:
> > No need to encode the SoC specifics in the bridge driver. For the
> > imx8mq we can use the mux-input-bridge.
> 
> You can't just change bindings like this. You'd still have to support 
> the "old" way. But IMO, this way is the right way.

My understanding is that binding stability only applies to released
kernels and this binding never was in released kernel yet. Does it still
apply in this case?
Cheers,
 -- Guido

> 
> > 
> > Signed-off-by: Guido Günther <agx@sigxcpu.org>
> > ---
> >  .../devicetree/bindings/display/bridge/nwl-dsi.yaml         | 6 ------
> >  1 file changed, 6 deletions(-)
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
index 8aff2d68fc33..d2c2d4e19a25 100644
--- a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -46,10 +46,6 @@  properties:
       - const: phy_ref
       - const: lcdif
 
-  mux-controls:
-    description:
-      mux controller node to use for operating the input mux
-
   phys:
     maxItems: 1
     description:
@@ -151,7 +147,6 @@  required:
   - clocks
   - compatible
   - interrupts
-  - mux-controls
   - phy-names
   - phys
   - ports
@@ -180,7 +175,6 @@  examples:
                        <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
               clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
               interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-              mux-controls = <&mux 0>;
               power-domains = <&pgc_mipi>;
               resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
                        <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,