| Message ID | 20200529131753.15587-1-heikki.krogerus@linux.intel.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 130206a88683d859f63ed6d4a56ab5c2b4930c8e |
| Headers | show |
| Series | usb: typec: mux: intel_pmc_mux: Fix DP alternate mode entry | expand |
Hi Heikki, On Fri, May 29, 2020 at 04:17:53PM +0300, Heikki Krogerus wrote: > The PMC needs to be notified separately about HPD (hotplug > detected) signal being high after mode entry. There is a bit > "HPD High" in the Alternate Mode Request that the driver > already sets, but that bit is only valid when the > DisplayPort Alternate Mode is directly entered from > disconnected state. > > Fixes: 5c4edcdbcd97 ("usb: typec: mux: intel: Fix DP_HPD_LVL bit field") > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tried this out; my DP monitor seems to enumerate correctly, so: Tested-by: Prashant Malani <pmalani@chromium.org> > --- > drivers/usb/typec/mux/intel_pmc_mux.c | 13 +++++++++++-- > 1 file changed, 11 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c > index 962bc69a6a59e..70ddc9d6d49e4 100644 > --- a/drivers/usb/typec/mux/intel_pmc_mux.c > +++ b/drivers/usb/typec/mux/intel_pmc_mux.c > @@ -148,7 +148,8 @@ pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_mux_state *state) > msg[0] = PMC_USB_DP_HPD; > msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; > > - msg[1] = PMC_USB_DP_HPD_IRQ; > + if (data->status & DP_STATUS_IRQ_HPD) > + msg[1] = PMC_USB_DP_HPD_IRQ; > > if (data->status & DP_STATUS_HPD_STATE) > msg[1] |= PMC_USB_DP_HPD_LVL; > @@ -161,6 +162,7 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) > { > struct typec_displayport_data *data = state->data; > struct altmode_req req = { }; > + int ret; > > if (data->status & DP_STATUS_IRQ_HPD) > return pmc_usb_mux_dp_hpd(port, state); > @@ -181,7 +183,14 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) > if (data->status & DP_STATUS_HPD_STATE) > req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH; > > - return pmc_usb_command(port, (void *)&req, sizeof(req)); > + ret = pmc_usb_command(port, (void *)&req, sizeof(req)); > + if (ret) > + return ret; > + > + if (data->status & DP_STATUS_HPD_STATE) > + return pmc_usb_mux_dp_hpd(port, state); > + > + return 0; > } > > static int > -- > 2.26.2 >
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index 962bc69a6a59e..70ddc9d6d49e4 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -148,7 +148,8 @@ pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_mux_state *state) msg[0] = PMC_USB_DP_HPD; msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; - msg[1] = PMC_USB_DP_HPD_IRQ; + if (data->status & DP_STATUS_IRQ_HPD) + msg[1] = PMC_USB_DP_HPD_IRQ; if (data->status & DP_STATUS_HPD_STATE) msg[1] |= PMC_USB_DP_HPD_LVL; @@ -161,6 +162,7 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) { struct typec_displayport_data *data = state->data; struct altmode_req req = { }; + int ret; if (data->status & DP_STATUS_IRQ_HPD) return pmc_usb_mux_dp_hpd(port, state); @@ -181,7 +183,14 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) if (data->status & DP_STATUS_HPD_STATE) req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH; - return pmc_usb_command(port, (void *)&req, sizeof(req)); + ret = pmc_usb_command(port, (void *)&req, sizeof(req)); + if (ret) + return ret; + + if (data->status & DP_STATUS_HPD_STATE) + return pmc_usb_mux_dp_hpd(port, state); + + return 0; } static int
The PMC needs to be notified separately about HPD (hotplug detected) signal being high after mode entry. There is a bit "HPD High" in the Alternate Mode Request that the driver already sets, but that bit is only valid when the DisplayPort Alternate Mode is directly entered from disconnected state. Fixes: 5c4edcdbcd97 ("usb: typec: mux: intel: Fix DP_HPD_LVL bit field") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> --- drivers/usb/typec/mux/intel_pmc_mux.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)