diff mbox series

iio: cros_ec: Reapply range at resume

Message ID 20200527043517.240123-1-gwendal@chromium.org (mailing list archive)
State New, archived
Headers show
Series iio: cros_ec: Reapply range at resume | expand

Commit Message

Gwendal Grignou May 27, 2020, 4:35 a.m. UTC
EC does not currently preserve range across sensor reinit.
If sensor is powered down at suspend, it will default to the EC default
range at resume, not the range set by the host.

Save range if modified, and apply at resume.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 .../common/cros_ec_sensors/cros_ec_sensors.c  |  5 +++++
 .../cros_ec_sensors/cros_ec_sensors_core.c    | 21 +++++++++++++++++++
 drivers/iio/light/cros_ec_light_prox.c        |  6 +++++-
 drivers/iio/pressure/cros_ec_baro.c           |  8 +++++--
 .../linux/iio/common/cros_ec_sensors_core.h   | 11 +++++++++-
 5 files changed, 47 insertions(+), 4 deletions(-)

Comments

Jonathan Cameron May 31, 2020, 1:56 p.m. UTC | #1
On Tue, 26 May 2020 21:35:17 -0700
Gwendal Grignou <gwendal@chromium.org> wrote:

> EC does not currently preserve range across sensor reinit.
> If sensor is powered down at suspend, it will default to the EC default
> range at resume, not the range set by the host.
> 
> Save range if modified, and apply at resume.
> 
> Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
one minor moan inline, but not important.

Applied to the togreg branch of iio.git and pushed out as testing.

There would be some logic to applying this as a fix and to stable.
If you like me to do that, let me know.

Thanks,

Jonathan

> ---
>  .../common/cros_ec_sensors/cros_ec_sensors.c  |  5 +++++
>  .../cros_ec_sensors/cros_ec_sensors_core.c    | 21 +++++++++++++++++++
>  drivers/iio/light/cros_ec_light_prox.c        |  6 +++++-
>  drivers/iio/pressure/cros_ec_baro.c           |  8 +++++--
>  .../linux/iio/common/cros_ec_sensors_core.h   | 11 +++++++++-
>  5 files changed, 47 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> index a66941fdb3855..130ab8ce0269b 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> @@ -200,6 +200,10 @@ static int cros_ec_sensors_write(struct iio_dev *indio_dev,
>  		st->core.param.sensor_range.roundup = 1;
>  
>  		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
> +		if (ret == 0) {
> +			st->core.range_updated = true;
> +			st->core.curr_range = val;
> +		}
>  		break;
>  	default:
>  		ret = cros_ec_sensors_core_write(
> @@ -315,6 +319,7 @@ MODULE_DEVICE_TABLE(platform, cros_ec_sensors_ids);
>  static struct platform_driver cros_ec_sensors_platform_driver = {
>  	.driver = {
>  		.name	= "cros-ec-sensors",
> +		.pm	= &cros_ec_sensors_pm_ops,
>  	},
>  	.probe		= cros_ec_sensors_probe,
>  	.id_table	= cros_ec_sensors_ids,
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> index c831915ca7e56..cda459b612067 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> @@ -824,5 +824,26 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
>  }
>  EXPORT_SYMBOL_GPL(cros_ec_sensors_core_write);
>  
> +static int __maybe_unused cros_ec_sensors_resume(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> +	int ret = 0;
> +
> +	if (st->range_updated) {
> +		mutex_lock(&st->cmd_lock);
> +		st->param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
> +		st->param.sensor_range.data = st->curr_range;
> +		st->param.sensor_range.roundup = 1;
> +		ret = cros_ec_motion_send_host_cmd(st, 0);
> +		mutex_unlock(&st->cmd_lock);
> +	}
> +	return ret;
> +}
> +
> +SIMPLE_DEV_PM_OPS(cros_ec_sensors_pm_ops, NULL, cros_ec_sensors_resume);
> +EXPORT_SYMBOL_GPL(cros_ec_sensors_pm_ops);
> +
>  MODULE_DESCRIPTION("ChromeOS EC sensor hub core functions");
>  MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
> index 2198b50909ed0..fed79ba27fda5 100644
> --- a/drivers/iio/light/cros_ec_light_prox.c
> +++ b/drivers/iio/light/cros_ec_light_prox.c
> @@ -145,8 +145,11 @@ static int cros_ec_light_prox_write(struct iio_dev *indio_dev,
>  		break;
>  	case IIO_CHAN_INFO_CALIBSCALE:
>  		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
> -		st->core.param.sensor_range.data = (val << 16) | (val2 / 100);
> +		st->core.curr_range = (val << 16) | (val2 / 100);
> +		st->core.param.sensor_range.data = st->core.curr_range;
>  		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
> +		if (ret == 0)
> +			st->core.range_updated = true;
>  		break;
>  	default:
>  		ret = cros_ec_sensors_core_write(&st->core, chan, val, val2,
> @@ -256,6 +259,7 @@ MODULE_DEVICE_TABLE(platform, cros_ec_light_prox_ids);
>  static struct platform_driver cros_ec_light_prox_platform_driver = {
>  	.driver = {
>  		.name	= "cros-ec-light-prox",
> +		.pm	= &cros_ec_sensors_pm_ops,
>  	},
>  	.probe		= cros_ec_light_prox_probe,
>  	.id_table	= cros_ec_light_prox_ids,
> diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
> index c079b89600824..f0938b6fbba07 100644
> --- a/drivers/iio/pressure/cros_ec_baro.c
> +++ b/drivers/iio/pressure/cros_ec_baro.c
> @@ -96,8 +96,11 @@ static int cros_ec_baro_write(struct iio_dev *indio_dev,
>  		/* Always roundup, so caller gets at least what it asks for. */
>  		st->core.param.sensor_range.roundup = 1;
>  
> -		if (cros_ec_motion_send_host_cmd(&st->core, 0))
> -			ret = -EIO;
> +		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
> +		if (ret == 0) {
> +			st->core.range_updated = true;
> +			st->core.curr_range = val;
> +		}
>  		break;
>  	default:
>  		ret = cros_ec_sensors_core_write(&st->core, chan, val, val2,
> @@ -199,6 +202,7 @@ MODULE_DEVICE_TABLE(platform, cros_ec_baro_ids);
>  static struct platform_driver cros_ec_baro_platform_driver = {
>  	.driver = {
>  		.name	= "cros-ec-baro",
> +		.pm	= &cros_ec_sensors_pm_ops,
>  	},
>  	.probe		= cros_ec_baro_probe,
>  	.id_table	= cros_ec_baro_ids,
> diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
> index 7bc961defa87e..caa8bb279a346 100644
> --- a/include/linux/iio/common/cros_ec_sensors_core.h
> +++ b/include/linux/iio/common/cros_ec_sensors_core.h
> @@ -42,6 +42,10 @@ typedef irqreturn_t (*cros_ec_sensors_capture_t)(int irq, void *p);
>   * @resp:			motion sensor response structure
>   * @type:			type of motion sensor
>   * @loc:			location where the motion sensor is placed
> + * @range_updated:		True if the range of the sensor has been
> + *				updated.
> + * @curr_range:			If updated, the current range value.
> + *				It will be reapplied at every resume.
>   * @calib:			calibration parameters. Note that trigger
>   *				captured data will always provide the calibrated
>   *				data
> @@ -65,6 +69,9 @@ struct cros_ec_sensors_core_state {
>  	enum motionsensor_type type;
>  	enum motionsensor_location loc;
>  
> +	bool range_updated;
> +	int curr_range;
> +
>  	struct calib_data {
>  		s16 offset;
>  		u16 scale;
> @@ -114,7 +121,9 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
>  			       struct iio_chan_spec const *chan,
>  			       int val, int val2, long mask);
>  
> -/* List of extended channel specification for all sensors */
> +extern const struct dev_pm_ops cros_ec_sensors_pm_ops;
> +
> +/* List of extended channel specification for all sensors. */

If I were being fussy... This change is unrelated and shouldn't be in this patch.

>  extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[];
>  extern const struct attribute *cros_ec_sensor_fifo_attributes[];
>
diff mbox series

Patch

diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index a66941fdb3855..130ab8ce0269b 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -200,6 +200,10 @@  static int cros_ec_sensors_write(struct iio_dev *indio_dev,
 		st->core.param.sensor_range.roundup = 1;
 
 		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret == 0) {
+			st->core.range_updated = true;
+			st->core.curr_range = val;
+		}
 		break;
 	default:
 		ret = cros_ec_sensors_core_write(
@@ -315,6 +319,7 @@  MODULE_DEVICE_TABLE(platform, cros_ec_sensors_ids);
 static struct platform_driver cros_ec_sensors_platform_driver = {
 	.driver = {
 		.name	= "cros-ec-sensors",
+		.pm	= &cros_ec_sensors_pm_ops,
 	},
 	.probe		= cros_ec_sensors_probe,
 	.id_table	= cros_ec_sensors_ids,
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index c831915ca7e56..cda459b612067 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -824,5 +824,26 @@  int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
 }
 EXPORT_SYMBOL_GPL(cros_ec_sensors_core_write);
 
+static int __maybe_unused cros_ec_sensors_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret = 0;
+
+	if (st->range_updated) {
+		mutex_lock(&st->cmd_lock);
+		st->param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
+		st->param.sensor_range.data = st->curr_range;
+		st->param.sensor_range.roundup = 1;
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		mutex_unlock(&st->cmd_lock);
+	}
+	return ret;
+}
+
+SIMPLE_DEV_PM_OPS(cros_ec_sensors_pm_ops, NULL, cros_ec_sensors_resume);
+EXPORT_SYMBOL_GPL(cros_ec_sensors_pm_ops);
+
 MODULE_DESCRIPTION("ChromeOS EC sensor hub core functions");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
index 2198b50909ed0..fed79ba27fda5 100644
--- a/drivers/iio/light/cros_ec_light_prox.c
+++ b/drivers/iio/light/cros_ec_light_prox.c
@@ -145,8 +145,11 @@  static int cros_ec_light_prox_write(struct iio_dev *indio_dev,
 		break;
 	case IIO_CHAN_INFO_CALIBSCALE:
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
-		st->core.param.sensor_range.data = (val << 16) | (val2 / 100);
+		st->core.curr_range = (val << 16) | (val2 / 100);
+		st->core.param.sensor_range.data = st->core.curr_range;
 		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret == 0)
+			st->core.range_updated = true;
 		break;
 	default:
 		ret = cros_ec_sensors_core_write(&st->core, chan, val, val2,
@@ -256,6 +259,7 @@  MODULE_DEVICE_TABLE(platform, cros_ec_light_prox_ids);
 static struct platform_driver cros_ec_light_prox_platform_driver = {
 	.driver = {
 		.name	= "cros-ec-light-prox",
+		.pm	= &cros_ec_sensors_pm_ops,
 	},
 	.probe		= cros_ec_light_prox_probe,
 	.id_table	= cros_ec_light_prox_ids,
diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
index c079b89600824..f0938b6fbba07 100644
--- a/drivers/iio/pressure/cros_ec_baro.c
+++ b/drivers/iio/pressure/cros_ec_baro.c
@@ -96,8 +96,11 @@  static int cros_ec_baro_write(struct iio_dev *indio_dev,
 		/* Always roundup, so caller gets at least what it asks for. */
 		st->core.param.sensor_range.roundup = 1;
 
-		if (cros_ec_motion_send_host_cmd(&st->core, 0))
-			ret = -EIO;
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret == 0) {
+			st->core.range_updated = true;
+			st->core.curr_range = val;
+		}
 		break;
 	default:
 		ret = cros_ec_sensors_core_write(&st->core, chan, val, val2,
@@ -199,6 +202,7 @@  MODULE_DEVICE_TABLE(platform, cros_ec_baro_ids);
 static struct platform_driver cros_ec_baro_platform_driver = {
 	.driver = {
 		.name	= "cros-ec-baro",
+		.pm	= &cros_ec_sensors_pm_ops,
 	},
 	.probe		= cros_ec_baro_probe,
 	.id_table	= cros_ec_baro_ids,
diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
index 7bc961defa87e..caa8bb279a346 100644
--- a/include/linux/iio/common/cros_ec_sensors_core.h
+++ b/include/linux/iio/common/cros_ec_sensors_core.h
@@ -42,6 +42,10 @@  typedef irqreturn_t (*cros_ec_sensors_capture_t)(int irq, void *p);
  * @resp:			motion sensor response structure
  * @type:			type of motion sensor
  * @loc:			location where the motion sensor is placed
+ * @range_updated:		True if the range of the sensor has been
+ *				updated.
+ * @curr_range:			If updated, the current range value.
+ *				It will be reapplied at every resume.
  * @calib:			calibration parameters. Note that trigger
  *				captured data will always provide the calibrated
  *				data
@@ -65,6 +69,9 @@  struct cros_ec_sensors_core_state {
 	enum motionsensor_type type;
 	enum motionsensor_location loc;
 
+	bool range_updated;
+	int curr_range;
+
 	struct calib_data {
 		s16 offset;
 		u16 scale;
@@ -114,7 +121,9 @@  int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
 			       struct iio_chan_spec const *chan,
 			       int val, int val2, long mask);
 
-/* List of extended channel specification for all sensors */
+extern const struct dev_pm_ops cros_ec_sensors_pm_ops;
+
+/* List of extended channel specification for all sensors. */
 extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[];
 extern const struct attribute *cros_ec_sensor_fifo_attributes[];