diff mbox series

[next] usb: xhci: fix spelling mistake in Kconfig "firwmare" -> "firmware"

Message ID 20200603121152.16550-1-colin.king@canonical.com (mailing list archive)
State Superseded
Headers show
Series [next] usb: xhci: fix spelling mistake in Kconfig "firwmare" -> "firmware" | expand

Commit Message

Colin King June 3, 2020, 12:11 p.m. UTC
From: Colin Ian King <colin.king@canonical.com>

There are two spelling mistakes in the Kconfig text. Fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/usb/host/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Colin King June 3, 2020, 12:15 p.m. UTC | #1
On 03/06/2020 13:11, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
> 
> There are two spelling mistakes in the Kconfig text. Fix these.
> 
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
>  drivers/usb/host/Kconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 62c348062e48..5f4b6c71392c 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -44,10 +44,10 @@ config USB_XHCI_PCI
>  	default y
>  
>  config USB_XHCI_PCI_RENESAS
> -	tristate "Support for additional Renesas xHCI controller with firwmare"
> +	tristate "Support for additional Renesas xHCI controller with firmware"
>  	---help---
>  	  Say 'Y' to enable the support for the Renesas xHCI controller with
> -	  firwmare. Make sure you have the firwmare for the device and
> +	  firmware. Make sure you have the firwmare for the device and
>  	  installed on your system for this device to work.
>  	  If unsure, say 'N'.
>  
> 
Spotted one more, I'll send a V2
Colin King June 3, 2020, 12:20 p.m. UTC | #2
On 03/06/2020 13:15, Colin Ian King wrote:
> On 03/06/2020 13:11, Colin King wrote:
>> From: Colin Ian King <colin.king@canonical.com>
>>
>> There are two spelling mistakes in the Kconfig text. Fix these.
>>
>> Signed-off-by: Colin Ian King <colin.king@canonical.com>
>> ---
>>  drivers/usb/host/Kconfig | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
>> index 62c348062e48..5f4b6c71392c 100644
>> --- a/drivers/usb/host/Kconfig
>> +++ b/drivers/usb/host/Kconfig
>> @@ -44,10 +44,10 @@ config USB_XHCI_PCI
>>  	default y
>>  
>>  config USB_XHCI_PCI_RENESAS
>> -	tristate "Support for additional Renesas xHCI controller with firwmare"
>> +	tristate "Support for additional Renesas xHCI controller with firmware"
>>  	---help---
>>  	  Say 'Y' to enable the support for the Renesas xHCI controller with
>> -	  firwmare. Make sure you have the firwmare for the device and
>> +	  firmware. Make sure you have the firwmare for the device and
>>  	  installed on your system for this device to work.
>>  	  If unsure, say 'N'.
>>  
>>
> Spotted one more, I'll send a V2
> 
Please ignore the NAK, I was looking at the wrong file, doh.  The
original patch is fine.

Colin
Greg Kroah-Hartman June 18, 2020, 8:40 a.m. UTC | #3
On Wed, Jun 03, 2020 at 01:11:52PM +0100, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
> 
> There are two spelling mistakes in the Kconfig text. Fix these.
> 
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
>  drivers/usb/host/Kconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 62c348062e48..5f4b6c71392c 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -44,10 +44,10 @@ config USB_XHCI_PCI
>  	default y
>  
>  config USB_XHCI_PCI_RENESAS
> -	tristate "Support for additional Renesas xHCI controller with firwmare"
> +	tristate "Support for additional Renesas xHCI controller with firmware"
>  	---help---
>  	  Say 'Y' to enable the support for the Renesas xHCI controller with
> -	  firwmare. Make sure you have the firwmare for the device and
> +	  firmware. Make sure you have the firwmare for the device and
>  	  installed on your system for this device to work.
>  	  If unsure, say 'N'.
>  
> -- 
> 2.25.1
> 

Does not apply to my tree :(
diff mbox series

Patch

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 62c348062e48..5f4b6c71392c 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -44,10 +44,10 @@  config USB_XHCI_PCI
 	default y
 
 config USB_XHCI_PCI_RENESAS
-	tristate "Support for additional Renesas xHCI controller with firwmare"
+	tristate "Support for additional Renesas xHCI controller with firmware"
 	---help---
 	  Say 'Y' to enable the support for the Renesas xHCI controller with
-	  firwmare. Make sure you have the firwmare for the device and
+	  firmware. Make sure you have the firwmare for the device and
 	  installed on your system for this device to work.
 	  If unsure, say 'N'.