| Message ID | 20200609175003.19793-1-nsaenzjulienne@suse.de (mailing list archive) |
|---|---|
| Headers | show |
| Series | Raspberry Pi 4 USB firmware initialization rework | expand |
On 6/9/2020 10:49 AM, Nicolas Saenz Julienne wrote: > Now that the reset driver exposing Raspberry Pi 4's firmware based USB > reset routine is available, let's add the device tree node exposing it. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's co-processor, VideoCore. This series reworks how we handle this. The previous solution makes use of PCI quirks and exporting platform specific functions. Albeit functional it feels pretty shoehorned. This proposes an alternative way of handling the triggering of the xHCI chip initialization trough means of a reset controller. The benefits are pretty evident: less platform churn in core xHCI code, and no explicit device dependency management in pcie-brcmstb. Note that patch #1 depend on another series[1]. The series is based on next-20200605. v1: https://lore.kernel.org/linux-usb/20200608192701.18355-1-nsaenzjulienne@suse.de/T/#t [1] https://lwn.net/ml/linux-kernel/cover.662a8d401787ef33780d91252a352de91dc4be10.1590594293.git-series.maxime@cerno.tech/ --- Changes since v1: - Rework reset controller so it's less USB centric. - Use correct reset controller API in xhci-pci - Correct typos Nicolas Saenz Julienne (9): dt-bindings: reset: Add a binding for the RPi Firmware reset controller reset: Add Raspberry Pi 4 firmware reset controller ARM: dts: bcm2711: Add firmware usb reset node ARM: dts: bcm2711: Add reset controller to xHCI node usb: xhci-pci: Add support for reset controllers Revert "USB: pci-quirks: Add Raspberry Pi 4 quirk" usb: host: pci-quirks: Bypass xHCI quirks for Raspberry Pi 4 Revert "firmware: raspberrypi: Introduce vl805 init routine" Revert "PCI: brcmstb: Wait for Raspberry Pi's firmware when present" .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++ arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 12 ++ drivers/firmware/Kconfig | 3 +- drivers/firmware/raspberrypi.c | 61 --------- drivers/pci/controller/pcie-brcmstb.c | 17 --- drivers/reset/Kconfig | 11 ++ drivers/reset/Makefile | 1 + drivers/reset/reset-raspberrypi.c | 126 ++++++++++++++++++ drivers/usb/host/pci-quirks.c | 22 ++- drivers/usb/host/xhci-pci.c | 7 + include/soc/bcm2835/raspberrypi-firmware.h | 7 - 11 files changed, 188 insertions(+), 100 deletions(-) create mode 100644 drivers/reset/reset-raspberrypi.c