| Message ID | 20200818213737.140613-6-cmo@melexis.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio: temperature: mlx90632: Add extended calibration calculations | expand |
On Wed, Aug 19, 2020 at 12:38 AM Crt Mori <cmo@melexis.com> wrote: > > There is some inconsistency and whitespace cleanup performed in this > patch. It was done on top of my other patches, but I can rebase to head > of the togreg branch if it would go in sooner. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> > Signed-off-by: Crt Mori <cmo@melexis.com> > --- > drivers/iio/temperature/mlx90632.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c > index 94bca2b2866a..472a7fb20615 100644 > --- a/drivers/iio/temperature/mlx90632.c > +++ b/drivers/iio/temperature/mlx90632.c > @@ -112,10 +112,10 @@ > #define MLX90632_DSP_VERSION 5 /* DSP version */ > #define MLX90632_DSP_MASK GENMASK(7, 0) /* DSP version in EE_VERSION */ > #define MLX90632_RESET_CMD 0x0006 /* Reset sensor (address or global) */ > -#define MLX90632_REF_12 12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */ > -#define MLX90632_REF_3 12LL /**< ResCtrlRef value of Channel 3 */ > -#define MLX90632_MAX_MEAS_NUM 31 /**< Maximum measurements in list */ > -#define MLX90632_SLEEP_DELAY_MS 3000 /**< Autosleep delay */ > +#define MLX90632_REF_12 12LL /* ResCtrlRef value of Ch 1 or Ch 2 */ > +#define MLX90632_REF_3 12LL /* ResCtrlRef value of Channel 3 */ > +#define MLX90632_MAX_MEAS_NUM 31 /* Maximum measurements in list */ > +#define MLX90632_SLEEP_DELAY_MS 3000 /* Autosleep delay */ > #define MLX90632_EXTENDED_LIMIT 27000 /* Extended mode raw value limit */ > > /** > @@ -889,7 +889,7 @@ static int mlx90632_probe(struct i2c_client *client, > mlx90632->mtyp = MLX90632_MTYP_EXTENDED; > } else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) { > dev_dbg(&client->dev, > - "Detected Unknown EEPROM calibration %x\n", read); > + "Detected Unknown EEPROM calibration %x\n", read); > } else { > dev_err(&client->dev, > "Wrong DSP version %x (expected %x)\n", > -- > 2.25.1 > -- With Best Regards, Andy Shevchenko
diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c index 94bca2b2866a..472a7fb20615 100644 --- a/drivers/iio/temperature/mlx90632.c +++ b/drivers/iio/temperature/mlx90632.c @@ -112,10 +112,10 @@ #define MLX90632_DSP_VERSION 5 /* DSP version */ #define MLX90632_DSP_MASK GENMASK(7, 0) /* DSP version in EE_VERSION */ #define MLX90632_RESET_CMD 0x0006 /* Reset sensor (address or global) */ -#define MLX90632_REF_12 12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */ -#define MLX90632_REF_3 12LL /**< ResCtrlRef value of Channel 3 */ -#define MLX90632_MAX_MEAS_NUM 31 /**< Maximum measurements in list */ -#define MLX90632_SLEEP_DELAY_MS 3000 /**< Autosleep delay */ +#define MLX90632_REF_12 12LL /* ResCtrlRef value of Ch 1 or Ch 2 */ +#define MLX90632_REF_3 12LL /* ResCtrlRef value of Channel 3 */ +#define MLX90632_MAX_MEAS_NUM 31 /* Maximum measurements in list */ +#define MLX90632_SLEEP_DELAY_MS 3000 /* Autosleep delay */ #define MLX90632_EXTENDED_LIMIT 27000 /* Extended mode raw value limit */ /** @@ -889,7 +889,7 @@ static int mlx90632_probe(struct i2c_client *client, mlx90632->mtyp = MLX90632_MTYP_EXTENDED; } else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) { dev_dbg(&client->dev, - "Detected Unknown EEPROM calibration %x\n", read); + "Detected Unknown EEPROM calibration %x\n", read); } else { dev_err(&client->dev, "Wrong DSP version %x (expected %x)\n",
There is some inconsistency and whitespace cleanup performed in this patch. It was done on top of my other patches, but I can rebase to head of the togreg branch if it would go in sooner. Signed-off-by: Crt Mori <cmo@melexis.com> --- drivers/iio/temperature/mlx90632.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)