Message ID | 1597903916-8674-1-git-send-email-tamizhr@codeaurora.org (mailing list archive) |
---|---|
State | Changes Requested |
Delegated to: | Johannes Berg |
Headers | show |
Series | iw: add TID specific Tx bitrate configuration | expand |
Hello Tamizh, > Add TID specific Tx bitrate configuration by using > handle_bitrates already APIs. > > Examples: > $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates auto > $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates limit vht-mcs-5 4:9 > > Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> > --- > bitrate.c | 27 ++++++++++++++++++++------- > interface.c | 34 +++++++++++++++++++++++++++++++++- > iw.h | 3 +++ > 3 files changed, 56 insertions(+), 8 deletions(-) ... > COMMAND(set, tidconf, "[peer <MAC address>] tids <mask> [override] [sretry <num>] [lretry <num>] " > - "[ampdu [on|off]] [amsdu [on|off]] [noack [on|off]] [rtscts [on|off]]", > + "[ampdu [on|off]] [amsdu [on|off]] [noack [on|off]] [rtscts [on|off]]" > + "[bitrates <type [auto|fixed|limit]> [legacy-<2.4|5> <legacy rate in Mbps>*] [ht-mcs-<2.4|5> <MCS index>*]" > + " [vht-mcs-<2.4|5> <NSS:MCSx,MCSy... | NSS:MCSx-MCSy>*] [sgi-2.4|lgi-2.4] [sgi-5|lgi-5]]", > NL80211_CMD_SET_TID_CONFIG, 0, CIB_NETDEV, handle_tid_config, > "Setup per-node TID specific configuration for TIDs selected by bitmask.\n" > "If MAC address is not specified, then supplied TID configuration\n" > @@ -955,4 +985,6 @@ COMMAND(set, tidconf, "[peer <MAC address>] tids <mask> [override] [sretry <num> > " $ iw dev wlan0 tids 0x5 ampdu off amsdu off rtscts on\n" > " $ iw dev wlan0 tids 0x3 override ampdu on noack on rtscts on\n" > " $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x1 ampdu off tids 0x3 amsdu off rtscts on\n" > + " $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates auto\n" > + " $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates limit vht-mcs-5 4:9\n" It just occured to me that I wrote incorrect help message in the patch adding tidconf command. IIRC the correct usage should be: $ iw dev wlan0 set tidconf peer 1:2:3:4:5:6 tids 0x3 ampdu off tids 0x2 sretry 10 lretry 100 $ iw dev wlan0 set tidconf tids 0xff ampdu off amsdu off sretry 10 lretry 100 noack off Could you please update new help entries and fix the existing ones ? Regards, Sergey
Hi Sergey, > >> Add TID specific Tx bitrate configuration by using >> handle_bitrates already APIs. >> >> Examples: >> $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates auto >> $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates limit >> vht-mcs-5 4:9 >> >> Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> >> --- >> bitrate.c | 27 ++++++++++++++++++++------- >> interface.c | 34 +++++++++++++++++++++++++++++++++- >> iw.h | 3 +++ >> 3 files changed, 56 insertions(+), 8 deletions(-) > > ... > >> COMMAND(set, tidconf, "[peer <MAC address>] tids <mask> [override] >> [sretry <num>] [lretry <num>] " >> - "[ampdu [on|off]] [amsdu [on|off]] [noack [on|off]] [rtscts >> [on|off]]", >> + "[ampdu [on|off]] [amsdu [on|off]] [noack [on|off]] [rtscts >> [on|off]]" >> + "[bitrates <type [auto|fixed|limit]> [legacy-<2.4|5> <legacy rate in >> Mbps>*] [ht-mcs-<2.4|5> <MCS index>*]" >> + " [vht-mcs-<2.4|5> <NSS:MCSx,MCSy... | NSS:MCSx-MCSy>*] >> [sgi-2.4|lgi-2.4] [sgi-5|lgi-5]]", >> NL80211_CMD_SET_TID_CONFIG, 0, CIB_NETDEV, handle_tid_config, >> "Setup per-node TID specific configuration for TIDs selected by >> bitmask.\n" >> "If MAC address is not specified, then supplied TID configuration\n" >> @@ -955,4 +985,6 @@ COMMAND(set, tidconf, "[peer <MAC address>] tids >> <mask> [override] [sretry <num> >> " $ iw dev wlan0 tids 0x5 ampdu off amsdu off rtscts on\n" >> " $ iw dev wlan0 tids 0x3 override ampdu on noack on rtscts on\n" >> " $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x1 ampdu off tids 0x3 >> amsdu off rtscts on\n" >> + " $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates auto\n" >> + " $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates limit >> vht-mcs-5 4:9\n" > > It just occured to me that I wrote incorrect help message in the patch > adding tidconf command. IIRC the correct usage should be: > > $ iw dev wlan0 set tidconf peer 1:2:3:4:5:6 tids 0x3 ampdu off tids > 0x2 sretry 10 lretry 100 > $ iw dev wlan0 set tidconf tids 0xff ampdu off amsdu off sretry 10 > lretry 100 noack off > > Could you please update new help entries and fix the existing ones ? > Sure, will send as separate patch along with fixing new entries in this patch. Tamizh.
On Thu, 2020-08-20 at 11:41 +0530, Tamizh Chelvam wrote: > Add TID specific Tx bitrate configuration by using > handle_bitrates already APIs. In addition to what Sergey said, I get: interface.c: In function ‘handle_tid_config’: interface.c:944:11: warning: implicit conversion from ‘enum nl80211_tid_config_attr’ to ‘enum nl80211_attrs’ [-Wenum-conversion] 944 | NL80211_TID_CONFIG_ATTR_TX_RATE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Please address that too. johannes
diff --git a/bitrate.c b/bitrate.c index 780017f..32a23a9 100644 --- a/bitrate.c +++ b/bitrate.c @@ -76,13 +76,12 @@ static int setup_vht(struct nl80211_txrate_vht *txrate_vht, #define VHT_ARGC_MAX 100 -static int handle_bitrates(struct nl80211_state *state, - struct nl_msg *msg, - int argc, char **argv, - enum id_input id) +int set_bitrates(struct nl_msg *msg, + int argc, char **argv, + enum nl80211_attrs attr) { struct nlattr *nl_rates, *nl_band; - int i; + int i, ret = 0; bool have_legacy_24 = false, have_legacy_5 = false; uint8_t legacy_24[32], legacy_5[32]; int n_legacy_24 = 0, n_legacy_5 = 0; @@ -195,10 +194,16 @@ static int handle_bitrates(struct nl80211_state *state, case S_GI: break; default: + if (attr != NL80211_ATTR_TX_RATES) + goto next; return 1; } } +next: + if (attr != NL80211_ATTR_TX_RATES) + ret = i; + if (have_vht_mcs_24) if (!setup_vht(&txrate_vht_24, vht_argc_24, vht_argv_24)) return -EINVAL; @@ -213,7 +218,7 @@ static int handle_bitrates(struct nl80211_state *state, if (sgi_24 && lgi_24) return 1; - nl_rates = nla_nest_start(msg, NL80211_ATTR_TX_RATES); + nl_rates = nla_nest_start(msg, attr); if (!nl_rates) goto nla_put_failure; @@ -253,11 +258,19 @@ static int handle_bitrates(struct nl80211_state *state, nla_nest_end(msg, nl_rates); - return 0; + return ret; nla_put_failure: return -ENOBUFS; } +static int handle_bitrates(struct nl80211_state *state, + struct nl_msg *msg, + int argc, char **argv, + enum id_input id) +{ + return set_bitrates(msg, argc, argv, NL80211_ATTR_TX_RATES); +} + #define DESCR_LEGACY "[legacy-<2.4|5> <legacy rate in Mbps>*]" #define DESCR DESCR_LEGACY " [ht-mcs-<2.4|5> <MCS index>*] [vht-mcs-<2.4|5> <NSS:MCSx,MCSy... | NSS:MCSx-MCSy>*] [sgi-2.4|lgi-2.4] [sgi-5|lgi-5]" diff --git a/interface.c b/interface.c index df96bed..b55261f 100644 --- a/interface.c +++ b/interface.c @@ -757,6 +757,7 @@ static int handle_tid_config(struct nl80211_state *state, { struct nlattr *tids_array = NULL; struct nlattr *tids_entry = NULL; + enum nl80211_tx_rate_setting txrate_type; unsigned char peer[ETH_ALEN]; int tids_num = 0; char *end; @@ -920,6 +921,33 @@ static int handle_tid_config(struct nl80211_state *state, argc -= 2; argv += 2; + } else if (strcmp(argv[0], "bitrates") == 0) { + if (argc < 2) { + fprintf(stderr, "not enough args for %s\n", argv[0]); + return HANDLER_RET_USAGE; + } + if (!strcmp(argv[1], "auto")) + txrate_type = NL80211_TX_RATE_AUTOMATIC; + else if (!strcmp(argv[1], "fixed")) + txrate_type = NL80211_TX_RATE_FIXED; + else if (!strcmp(argv[1], "limit")) + txrate_type = NL80211_TX_RATE_LIMITED; + else { + printf("Invalid parameter: %s\n", argv[0]); + return 2; + } + NLA_PUT_U8(msg, NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, txrate_type); + argc -= 2; + argv += 2; + if (txrate_type != NL80211_TX_RATE_AUTOMATIC) { + ret = set_bitrates(msg, argc, argv, + NL80211_TID_CONFIG_ATTR_TX_RATE); + if (ret < 2) + return 1; + + argc -= ret; + argv += ret; + } } else { fprintf(stderr, "Unknown parameter: %s\n", argv[0]); return HANDLER_RET_USAGE; @@ -945,7 +973,9 @@ nla_put_failure: } COMMAND(set, tidconf, "[peer <MAC address>] tids <mask> [override] [sretry <num>] [lretry <num>] " - "[ampdu [on|off]] [amsdu [on|off]] [noack [on|off]] [rtscts [on|off]]", + "[ampdu [on|off]] [amsdu [on|off]] [noack [on|off]] [rtscts [on|off]]" + "[bitrates <type [auto|fixed|limit]> [legacy-<2.4|5> <legacy rate in Mbps>*] [ht-mcs-<2.4|5> <MCS index>*]" + " [vht-mcs-<2.4|5> <NSS:MCSx,MCSy... | NSS:MCSx-MCSy>*] [sgi-2.4|lgi-2.4] [sgi-5|lgi-5]]", NL80211_CMD_SET_TID_CONFIG, 0, CIB_NETDEV, handle_tid_config, "Setup per-node TID specific configuration for TIDs selected by bitmask.\n" "If MAC address is not specified, then supplied TID configuration\n" @@ -955,4 +985,6 @@ COMMAND(set, tidconf, "[peer <MAC address>] tids <mask> [override] [sretry <num> " $ iw dev wlan0 tids 0x5 ampdu off amsdu off rtscts on\n" " $ iw dev wlan0 tids 0x3 override ampdu on noack on rtscts on\n" " $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x1 ampdu off tids 0x3 amsdu off rtscts on\n" + " $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates auto\n" + " $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates limit vht-mcs-5 4:9\n" ); diff --git a/iw.h b/iw.h index bc0b3ac..46bc9b5 100644 --- a/iw.h +++ b/iw.h @@ -245,4 +245,7 @@ void nan_bf(uint8_t idx, uint8_t *bf, uint16_t bf_len, const uint8_t *buf, char *hex2bin(const char *hex, char *buf); +int set_bitrates(struct nl_msg *msg, int argc, char **argv, + enum nl80211_attrs attr); + #endif /* __IW_H */
Add TID specific Tx bitrate configuration by using handle_bitrates already APIs. Examples: $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates auto $ iw dev wlan0 peer xx:xx:xx:xx:xx:xx tids 0x2 bitrates limit vht-mcs-5 4:9 Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> --- bitrate.c | 27 ++++++++++++++++++++------- interface.c | 34 +++++++++++++++++++++++++++++++++- iw.h | 3 +++ 3 files changed, 56 insertions(+), 8 deletions(-)