diff mbox series

[v2,3/6] regulator: Add regulator driver for ATC260x PMICs

Message ID 8da70f0b19de17fb8edead7ff06461ae2451b0e9.1598043782.git.cristian.ciocaltea@gmail.com (mailing list archive)
State New, archived
Headers show
Series Add initial support for ATC260x PMICs | expand

Commit Message

Cristian Ciocaltea Aug. 21, 2020, 10:19 p.m. UTC
This driver supports the DC-DC converters and LDO regulators found in
the ATC2603C and ATC2609A chip variants of the Actions Semi ATC260x
family of PMICs.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[cristian: add ATC2603C variant, more regulator capabilities, cleanups]
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
---
 drivers/regulator/Kconfig             |   8 +
 drivers/regulator/Makefile            |   1 +
 drivers/regulator/atc260x-regulator.c | 511 ++++++++++++++++++++++++++
 3 files changed, 520 insertions(+)
 create mode 100644 drivers/regulator/atc260x-regulator.c

Comments

Mark Brown Aug. 24, 2020, 11 a.m. UTC | #1
On Sat, Aug 22, 2020 at 01:19:49AM +0300, Cristian Ciocaltea wrote:

> +static int atc260x_set_voltage_time_sel(struct regulator_dev *rdev,
> +					unsigned int old_selector,
> +					unsigned int new_selector)
> +{
> +	struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
> +	int id = rdev_get_id(rdev);
> +
> +	if (new_selector > old_selector)
> +		return id > data->last_dcdc_reg_id ? data->voltage_time_ldo
> +						   : data->voltage_time_dcdc;

Please write normal conditional statements to make things easier to
read.  It also looks like this would be more robustly written by just
having separate ops for DCDCs and LDOs, this could easily break if
another device is supported in the driver.

> +static const struct of_device_id atc260x_regulator_of_match[] = {
> +	{ .compatible = "actions,atc2603c-regulator" },
> +	{ .compatible = "actions,atc2609a-regulator" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, atc260x_regulator_of_match);

We don't need compatibles here, this is just reflecting the current
Linux device model into the OS neutral DT bindings.  Another OS may
choose to split regulators up differently.  We should just instantiate
the regulator device from the MFD based on identifying the chip overall.
Cristian Ciocaltea Aug. 24, 2020, 11:23 p.m. UTC | #2
Hi Mark,

Thanks for reviewing!

On Mon, Aug 24, 2020 at 12:00:45PM +0100, Mark Brown wrote:
> On Sat, Aug 22, 2020 at 01:19:49AM +0300, Cristian Ciocaltea wrote:
> 
> > +static int atc260x_set_voltage_time_sel(struct regulator_dev *rdev,
> > +					unsigned int old_selector,
> > +					unsigned int new_selector)
> > +{
> > +	struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
> > +	int id = rdev_get_id(rdev);
> > +
> > +	if (new_selector > old_selector)
> > +		return id > data->last_dcdc_reg_id ? data->voltage_time_ldo
> > +						   : data->voltage_time_dcdc;
> 
> Please write normal conditional statements to make things easier to
> read.  It also looks like this would be more robustly written by just
> having separate ops for DCDCs and LDOs, this could easily break if
> another device is supported in the driver.

Sure, I can provide separate ops, but in this case we duplicate almost
all of them. If this is not acceptable, then I will just rewrite the
conditional statement.

> > +static const struct of_device_id atc260x_regulator_of_match[] = {
> > +	{ .compatible = "actions,atc2603c-regulator" },
> > +	{ .compatible = "actions,atc2609a-regulator" },
> > +	{ /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, atc260x_regulator_of_match);
> 
> We don't need compatibles here, this is just reflecting the current
> Linux device model into the OS neutral DT bindings.  Another OS may
> choose to split regulators up differently.  We should just instantiate
> the regulator device from the MFD based on identifying the chip overall.

I have actually seen this in some MFD drivers I had been studying before
starting this work. I wasn't sure what is the rationale behind, I
assumed they have just an informative purpose.

So, if I understand correctly, this approach is deprecated now and I
should remove the compatibles from both the function driver and the
corresponding mfd_cell in the core implementation. And not only for
regulators, but for all the other functions of the MFD device.

Regards,
Cristi
Mark Brown Aug. 25, 2020, 10:55 a.m. UTC | #3
On Tue, Aug 25, 2020 at 02:23:10AM +0300, Cristian Ciocaltea wrote:
> On Mon, Aug 24, 2020 at 12:00:45PM +0100, Mark Brown wrote:

> > Please write normal conditional statements to make things easier to
> > read.  It also looks like this would be more robustly written by just
> > having separate ops for DCDCs and LDOs, this could easily break if
> > another device is supported in the driver.

> Sure, I can provide separate ops, but in this case we duplicate almost
> all of them. If this is not acceptable, then I will just rewrite the
> conditional statement.

That's fine, it's just a fairly small struct that's being duplicated not
code.
diff mbox series

Patch

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index de17ef7e18f0..860e46798503 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -170,6 +170,14 @@  config REGULATOR_AS3722
 	  AS3722 PMIC. This will enable support for all the software
 	  controllable DCDC/LDO regulators.
 
+config REGULATOR_ATC260X
+	tristate "Actions Semi ATC260x PMIC Regulators"
+	depends on MFD_ATC260X
+	help
+	  This driver provides support for the voltage regulators on the
+	  ATC260x PMICs. This will enable support for all the software
+	  controllable DCDC/LDO regulators.
+
 config REGULATOR_AXP20X
 	tristate "X-POWERS AXP20X PMIC Regulators"
 	depends on MFD_AXP20X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index d8d3ecf526a8..181ff77ee23c 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -26,6 +26,7 @@  obj-$(CONFIG_REGULATOR_ARIZONA_LDO1) += arizona-ldo1.o
 obj-$(CONFIG_REGULATOR_ARIZONA_MICSUPP) += arizona-micsupp.o
 obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
 obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
+obj-$(CONFIG_REGULATOR_ATC260X) += atc260x-regulator.o
 obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
 obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
 obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o
diff --git a/drivers/regulator/atc260x-regulator.c b/drivers/regulator/atc260x-regulator.c
new file mode 100644
index 000000000000..7fab56cb80df
--- /dev/null
+++ b/drivers/regulator/atc260x-regulator.c
@@ -0,0 +1,511 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Regulator driver for ATC260x PMICs
+//
+// Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+// Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+#include <linux/mfd/atc260x/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+struct atc260x_regulator_data {
+	int last_dcdc_reg_id;
+	int voltage_time_dcdc;
+	int voltage_time_ldo;
+};
+
+static const struct linear_range atc2603c_dcdc_voltage_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1300000, 0, 13, 50000),
+	REGULATOR_LINEAR_RANGE(1950000, 14, 15, 100000),
+};
+
+static const struct linear_range atc2609a_dcdc_voltage_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 127, 6250),
+	REGULATOR_LINEAR_RANGE(1400000, 128, 232, 25000),
+};
+
+static const struct linear_range atc2609a_ldo_voltage_ranges0[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0, 15, 100000),
+	REGULATOR_LINEAR_RANGE(2100000, 16, 28, 100000),
+};
+
+static const struct linear_range atc2609a_ldo_voltage_ranges1[] = {
+	REGULATOR_LINEAR_RANGE(850000, 0, 15, 100000),
+	REGULATOR_LINEAR_RANGE(2100000, 16, 27, 100000),
+};
+
+static const unsigned int atc260x_ldo_voltage_range_sel[] = {
+	0x0, 0x1,
+};
+
+static int atc260x_set_voltage_time_sel(struct regulator_dev *rdev,
+					unsigned int old_selector,
+					unsigned int new_selector)
+{
+	struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+
+	if (new_selector > old_selector)
+		return id > data->last_dcdc_reg_id ? data->voltage_time_ldo
+						   : data->voltage_time_dcdc;
+
+	return 0;
+}
+
+static const struct regulator_ops atc260x_reg_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = atc260x_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_reg_bypass_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = atc260x_set_voltage_time_sel,
+	.set_bypass = regulator_set_bypass_regmap,
+	.get_bypass = regulator_get_bypass_regmap,
+};
+
+static const struct regulator_ops atc260x_reg_bypass_discharge_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = atc260x_set_voltage_time_sel,
+	.set_bypass = regulator_set_bypass_regmap,
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_active_discharge = regulator_set_active_discharge_regmap,
+};
+
+static const struct regulator_ops atc260x_reg_range_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = atc260x_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_reg_range_pick_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_pickable_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_pickable_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
+	.set_voltage_time_sel = atc260x_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_reg_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = atc260x_set_voltage_time_sel,
+};
+
+/*
+ * ATC2603C notes:
+ * - LDO8 is not documented in datasheet (v2.4), but supported
+ *   in the vendor's driver implementation (xapp-le-kernel).
+ * - LDO12 mentioned in datasheet is not programmable, hence not
+ *   handled in this driver.
+ */
+enum atc2603c_reg_ids {
+	ATC2603C_ID_DCDC1,
+	ATC2603C_ID_DCDC2,
+	ATC2603C_ID_DCDC3,
+	ATC2603C_ID_LDO1,
+	ATC2603C_ID_LDO2,
+	ATC2603C_ID_LDO3,
+	ATC2603C_ID_LDO5,
+	ATC2603C_ID_LDO6,
+	ATC2603C_ID_LDO7,
+	ATC2603C_ID_LDO8,
+	ATC2603C_ID_LDO11,
+	ATC2603C_ID_SWITCHLDO1,
+	ATC2603C_ID_MAX,
+};
+
+#define atc2603c_reg_desc_dcdc(num, min, step, n_volt, vsel_h, vsel_l) { \
+	.name = "DCDC"#num, \
+	.supply_name = "dcdc"#num, \
+	.of_match = of_match_ptr("dcdc"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_DCDC##num, \
+	.ops = &atc260x_reg_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = min, \
+	.uV_step = step, \
+	.n_voltages = n_volt, \
+	.vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
+	.vsel_mask = GENMASK(vsel_h, vsel_l), \
+	.enable_reg = ATC2603C_PMU_DC##num##_CTL0, \
+	.enable_mask = BIT(15), \
+	.enable_time = 800, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_dcdc_range(num, vsel_h, vsel_l) { \
+	.name = "DCDC"#num, \
+	.supply_name = "dcdc"#num, \
+	.of_match = of_match_ptr("dcdc"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_DCDC##num, \
+	.ops = &atc260x_reg_range_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.n_voltages = 16, \
+	.linear_ranges = atc2603c_dcdc_voltage_ranges, \
+	.n_linear_ranges = ARRAY_SIZE(atc2603c_dcdc_voltage_ranges), \
+	.vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
+	.vsel_mask = GENMASK(vsel_h, vsel_l), \
+	.enable_reg = ATC2603C_PMU_DC##num##_CTL0, \
+	.enable_mask = BIT(15), \
+	.enable_time = 800, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_dcdc_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \
+	.name = "DCDC"#num, \
+	.supply_name = "dcdc"#num, \
+	.of_match = of_match_ptr("dcdc"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_DCDC##num, \
+	.ops = &atc260x_reg_fixed_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = min, \
+	.uV_step = step, \
+	.n_voltages = n_volt, \
+	.vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
+	.vsel_mask = GENMASK(vsel_h, vsel_l), \
+	.enable_time = 800, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_ldo(num, min, step, n_volt, vsel_h, vsel_l) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_LDO##num, \
+	.ops = &atc260x_reg_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = min, \
+	.uV_step = step, \
+	.n_voltages = n_volt, \
+	.vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \
+	.vsel_mask = GENMASK(vsel_h, vsel_l), \
+	.enable_reg = ATC2603C_PMU_LDO##num##_CTL, \
+	.enable_mask = BIT(0), \
+	.enable_time = 2000, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_ldo_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_LDO##num, \
+	.ops = &atc260x_reg_fixed_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = min, \
+	.uV_step = step, \
+	.n_voltages = n_volt, \
+	.vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \
+	.vsel_mask = GENMASK(vsel_h, vsel_l), \
+	.enable_time = 2000, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_ldo_switch(num, min, step, n_volt, vsel_h, vsel_l) { \
+	.name = "SWITCHLDO"#num, \
+	.supply_name = "switchldo"#num, \
+	.of_match = of_match_ptr("switchldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_SWITCHLDO##num, \
+	.ops = &atc260x_reg_bypass_discharge_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = min, \
+	.uV_step = step, \
+	.n_voltages = n_volt, \
+	.vsel_reg = ATC2603C_PMU_SWITCH_CTL, \
+	.vsel_mask = GENMASK(vsel_h, vsel_l), \
+	.enable_reg = ATC2603C_PMU_SWITCH_CTL, \
+	.enable_mask = BIT(15), \
+	.enable_is_inverted = true, \
+	.enable_time = 2000, \
+	.bypass_reg = ATC2603C_PMU_SWITCH_CTL, \
+	.bypass_mask = BIT(5), \
+	.active_discharge_reg = ATC2603C_PMU_SWITCH_CTL, \
+	.active_discharge_mask = BIT(1), \
+	.owner = THIS_MODULE, \
+}
+
+static const struct regulator_desc atc2603c_reg[] = {
+	atc2603c_reg_desc_dcdc_fixed(1, 700000, 25000, 29, 11, 7),
+	atc2603c_reg_desc_dcdc_range(2, 12, 8),
+	atc2603c_reg_desc_dcdc_fixed(3, 2600000, 100000, 8, 11, 9),
+	atc2603c_reg_desc_ldo_fixed(1, 2600000, 100000, 8, 15, 13),
+	atc2603c_reg_desc_ldo_fixed(2, 2600000, 100000, 8, 15, 13),
+	atc2603c_reg_desc_ldo_fixed(3, 1500000, 100000, 6, 15, 13),
+	atc2603c_reg_desc_ldo(5, 2600000, 100000, 8, 15, 13),
+	atc2603c_reg_desc_ldo_fixed(6, 700000, 25000, 29, 15, 11),
+	atc2603c_reg_desc_ldo(7, 1500000, 100000, 6, 15, 13),
+	atc2603c_reg_desc_ldo(8, 2300000, 100000, 11, 15, 12),
+	atc2603c_reg_desc_ldo_fixed(11, 2600000, 100000, 8, 15, 13),
+	atc2603c_reg_desc_ldo_switch(1, 3000000, 100000, 4, 4, 3),
+};
+
+static const struct regulator_desc atc2603c_reg_dcdc2_ver_b =
+	atc2603c_reg_desc_dcdc(2, 1000000, 50000, 18, 12, 8);
+
+enum atc2609a_reg_ids {
+	ATC2609A_ID_DCDC0,
+	ATC2609A_ID_DCDC1,
+	ATC2609A_ID_DCDC2,
+	ATC2609A_ID_DCDC3,
+	ATC2609A_ID_DCDC4,
+	ATC2609A_ID_LDO0,
+	ATC2609A_ID_LDO1,
+	ATC2609A_ID_LDO2,
+	ATC2609A_ID_LDO3,
+	ATC2609A_ID_LDO4,
+	ATC2609A_ID_LDO5,
+	ATC2609A_ID_LDO6,
+	ATC2609A_ID_LDO7,
+	ATC2609A_ID_LDO8,
+	ATC2609A_ID_LDO9,
+	ATC2609A_ID_MAX,
+};
+
+#define atc2609a_reg_desc_dcdc(num, en_bit) { \
+	.name = "DCDC"#num, \
+	.supply_name = "dcdc"#num, \
+	.of_match = of_match_ptr("dcdc"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2609A_ID_DCDC##num, \
+	.ops = &atc260x_reg_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = 600000, \
+	.uV_step = 6250, \
+	.n_voltages = 256, \
+	.vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \
+	.vsel_mask = GENMASK(15, 8), \
+	.enable_reg = ATC2609A_PMU_DC_OSC, \
+	.enable_mask = BIT(en_bit), \
+	.enable_time = 800, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_dcdc_range(num, en_bit) { \
+	.name = "DCDC"#num, \
+	.supply_name = "dcdc"#num, \
+	.of_match = of_match_ptr("dcdc"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2609A_ID_DCDC##num, \
+	.ops = &atc260x_reg_range_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.n_voltages = 233, \
+	.linear_ranges = atc2609a_dcdc_voltage_ranges, \
+	.n_linear_ranges = ARRAY_SIZE(atc2609a_dcdc_voltage_ranges), \
+	.vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \
+	.vsel_mask = GENMASK(15, 8), \
+	.enable_reg = ATC2609A_PMU_DC_OSC, \
+	.enable_mask = BIT(en_bit), \
+	.enable_time = 800, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_ldo(num) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2609A_ID_LDO##num, \
+	.ops = &atc260x_reg_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = 700000, \
+	.uV_step = 100000, \
+	.n_voltages = 16, \
+	.vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.vsel_mask = GENMASK(4, 1), \
+	.enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.enable_mask = BIT(0), \
+	.enable_time = 2000, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_ldo_bypass(num) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2609A_ID_LDO##num, \
+	.ops = &atc260x_reg_bypass_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = 2300000, \
+	.uV_step = 100000, \
+	.n_voltages = 12, \
+	.vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.vsel_mask = GENMASK(5, 2), \
+	.enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.enable_mask = BIT(0), \
+	.enable_time = 2000, \
+	.bypass_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.bypass_mask = BIT(1), \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_ldo_range_pick(num, n_range) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2609A_ID_LDO##num, \
+	.ops = &atc260x_reg_range_pick_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.linear_ranges = atc2609a_ldo_voltage_ranges##n_range, \
+	.n_linear_ranges = ARRAY_SIZE(atc2609a_ldo_voltage_ranges##n_range), \
+	.vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.vsel_mask = GENMASK(4, 1), \
+	.vsel_range_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.vsel_range_mask = BIT(5), \
+	.linear_range_selectors = atc260x_ldo_voltage_range_sel, \
+	.enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.enable_mask = BIT(0), \
+	.enable_time = 2000, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_ldo_fixed(num) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2609A_ID_LDO##num, \
+	.ops = &atc260x_reg_fixed_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = 2600000, \
+	.uV_step = 100000, \
+	.n_voltages = 8, \
+	.vsel_reg = ATC2609A_PMU_LDO##num##_CTL, \
+	.vsel_mask = GENMASK(15, 13), \
+	.enable_time = 2000, \
+	.owner = THIS_MODULE, \
+}
+
+static const struct regulator_desc atc2609a_reg[] = {
+	atc2609a_reg_desc_dcdc(0, 4),
+	atc2609a_reg_desc_dcdc(1, 5),
+	atc2609a_reg_desc_dcdc(2, 6),
+	atc2609a_reg_desc_dcdc_range(3, 7),
+	atc2609a_reg_desc_dcdc(4, 8),
+	atc2609a_reg_desc_ldo_bypass(0),
+	atc2609a_reg_desc_ldo_bypass(1),
+	atc2609a_reg_desc_ldo_bypass(2),
+	atc2609a_reg_desc_ldo_range_pick(3, 0),
+	atc2609a_reg_desc_ldo_range_pick(4, 0),
+	atc2609a_reg_desc_ldo(5),
+	atc2609a_reg_desc_ldo_range_pick(6, 1),
+	atc2609a_reg_desc_ldo_range_pick(7, 0),
+	atc2609a_reg_desc_ldo_range_pick(8, 0),
+	atc2609a_reg_desc_ldo_fixed(9),
+};
+
+static int atc260x_regulator_probe(struct platform_device *pdev)
+{
+	struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = atc260x->dev;
+	struct atc260x_regulator_data *atc260x_data;
+	struct regulator_config config = {};
+	struct regulator_dev *atc260x_rdev;
+	const struct regulator_desc *regulators;
+	bool atc2603c_ver_b = false;
+	int i, nregulators;
+
+	if (!pdev->dev.of_node)
+		return -ENXIO;
+
+	atc260x_data = devm_kzalloc(&pdev->dev, sizeof(*atc260x_data), GFP_KERNEL);
+	if (!atc260x_data)
+		return -ENOMEM;
+
+	atc260x_data->voltage_time_dcdc = 350;
+	atc260x_data->voltage_time_ldo = 800;
+
+	switch (atc260x->ic_type) {
+	case ATC2603C:
+		atc260x_data->last_dcdc_reg_id = ATC2603C_ID_DCDC3;
+		regulators = atc2603c_reg;
+		nregulators = ATC2603C_ID_MAX;
+		atc2603c_ver_b = atc260x->ic_ver == ATC260X_B;
+		break;
+	case ATC2609A:
+		atc260x_data->last_dcdc_reg_id = ATC2609A_ID_DCDC4;
+		atc260x_data->voltage_time_dcdc = 250;
+		regulators = atc2609a_reg;
+		nregulators = ATC2609A_ID_MAX;
+		break;
+	default:
+		dev_err(dev, "unsupported ATC260X ID %d\n", atc260x->ic_type);
+		return -EINVAL;
+	}
+
+	config.dev = dev;
+	config.regmap = atc260x->regmap;
+	config.driver_data = atc260x_data;
+
+	/* Instantiate the regulators */
+	for (i = 0; i < nregulators; i++) {
+		if (atc2603c_ver_b && regulators[i].id == ATC2603C_ID_DCDC2)
+			atc260x_rdev = devm_regulator_register(&pdev->dev,
+							       &atc2603c_reg_dcdc2_ver_b,
+							       &config);
+		else
+			atc260x_rdev = devm_regulator_register(&pdev->dev,
+							       &regulators[i],
+							       &config);
+		if (IS_ERR(atc260x_rdev)) {
+			dev_err(dev, "failed to register regulator: %d\n", i);
+			return PTR_ERR(atc260x_rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id atc260x_regulator_of_match[] = {
+	{ .compatible = "actions,atc2603c-regulator" },
+	{ .compatible = "actions,atc2609a-regulator" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atc260x_regulator_of_match);
+
+static struct platform_driver atc260x_regulator_driver = {
+	.probe = atc260x_regulator_probe,
+	.driver = {
+		.name = "atc260x-regulator",
+		.of_match_table = of_match_ptr(atc260x_regulator_of_match),
+	},
+};
+
+module_platform_driver(atc260x_regulator_driver);
+
+MODULE_DESCRIPTION("Regulator driver for ATC260x PMICs");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>");
+MODULE_LICENSE("GPL");