| Message ID | 20200925101731.2159827-7-luc@lmichel.fr (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | raspi: add the bcm2835 cprman clock manager | expand |
On 9/25/20 12:17 PM, Luc Michel wrote: > The cprman PLLs generate a clock based on a prescaler, a multiplier and > a divider. The prescaler doubles the parent (xosc) frequency, then the > multiplier/divider are applied. The multiplier has an integer and a > fractionnal part. Typo "fractional". > > This commit also implements the cprman CM_LOCK register. This register > reports which PLL is currently locked. We consider a PLL has being > locked as soon as it is enabled (on real hardware, there is a delay > after turning a PLL on, for it to stabilise). Typo "stabilize". > > Signed-off-by: Luc Michel <luc@lmichel.fr> > --- > include/hw/misc/bcm2835_cprman_internals.h | 8 +++ > hw/misc/bcm2835_cprman.c | 64 +++++++++++++++++++++- > 2 files changed, 71 insertions(+), 1 deletion(-) > > diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h > index 5cfa849492..22a2500ab0 100644 > --- a/include/hw/misc/bcm2835_cprman_internals.h > +++ b/include/hw/misc/bcm2835_cprman_internals.h > @@ -98,10 +98,18 @@ REG32(A2W_PLLA_FRAC, 0x1200) > REG32(A2W_PLLC_FRAC, 0x1220) > REG32(A2W_PLLD_FRAC, 0x1240) > REG32(A2W_PLLH_FRAC, 0x1260) > REG32(A2W_PLLB_FRAC, 0x12e0) > > +/* misc registers */ > +REG32(CM_LOCK, 0x114) > + FIELD(CM_LOCK, FLOCKH, 12, 1) > + FIELD(CM_LOCK, FLOCKD, 11, 1) > + FIELD(CM_LOCK, FLOCKC, 10, 1) > + FIELD(CM_LOCK, FLOCKB, 9, 1) > + FIELD(CM_LOCK, FLOCKA, 8, 1) > + > /* > * This field is common to all registers. Each register write value must match > * the CPRMAN_PASSWORD magic value in its 8 MSB. > */ > FIELD(CPRMAN, PASSWORD, 24, 8) > diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c > index ad71d30a86..ba82522eb1 100644 > --- a/hw/misc/bcm2835_cprman.c > +++ b/hw/misc/bcm2835_cprman.c > @@ -48,13 +48,51 @@ > #include "hw/misc/bcm2835_cprman_internals.h" > #include "trace.h" > > /* PLL */ > > +static bool pll_is_locked(const CprmanPLLState *pll) > +{ > + return !FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PWRDN) > + && !FIELD_EX32(*pll->reg_cm, CM_PLLx, ANARST); > +} > + > static void pll_update(CprmanPLLState *pll) > { > - clock_update(pll->out, 0); > + uint64_t freq, ndiv, fdiv, pdiv; > + > + if (!pll_is_locked(pll)) { > + clock_update(pll->out, 0); > + return; > + } > + > + pdiv = FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PDIV); > + > + if (!pdiv) { > + clock_update(pll->out, 0); > + return; > + } > + > + ndiv = FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, NDIV); > + fdiv = FIELD_EX32(*pll->reg_a2w_frac, A2W_PLLx_FRAC, FRAC); > + > + if (pll->reg_a2w_ana[1] & pll->prediv_mask) { > + /* The prescaler doubles the parent frequency */ > + ndiv *= 2; > + fdiv *= 2; > + } > + > + /* > + * We have a multiplier with an integer part (ndiv) and a fractional part > + * (fdiv), and a divider (pdiv). > + */ > + freq = clock_get_hz(pll->xosc_in) * > + ((ndiv << R_A2W_PLLx_FRAC_FRAC_LENGTH) + fdiv); > + freq /= pdiv; > + freq >>= R_A2W_PLLx_FRAC_FRAC_LENGTH; Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > + > + clock_update_hz(pll->out, freq); > } > > static void pll_xosc_update(void *opaque) > { > pll_update(CPRMAN_PLL(opaque)); > @@ -94,18 +132,42 @@ static const TypeInfo cprman_pll_info = { > }; > > > /* CPRMAN "top level" model */ > > +static uint32_t get_cm_lock(const BCM2835CprmanState *s) > +{ > + static const int CM_LOCK_MAPPING[] = { Maybe CM_LOCK_MAPPING[CPRMAN_NUM_PLL]. > + [CPRMAN_PLLA] = R_CM_LOCK_FLOCKA_SHIFT, > + [CPRMAN_PLLC] = R_CM_LOCK_FLOCKC_SHIFT, > + [CPRMAN_PLLD] = R_CM_LOCK_FLOCKD_SHIFT, > + [CPRMAN_PLLH] = R_CM_LOCK_FLOCKH_SHIFT, > + [CPRMAN_PLLB] = R_CM_LOCK_FLOCKB_SHIFT, > + }; > + > + uint32_t r = 0; > + size_t i; > + > + for (i = 0; i < CPRMAN_NUM_PLL; i++) { > + r |= pll_is_locked(&s->plls[i]) << CM_LOCK_MAPPING[i]; > + } > + > + return r; > +} > + > static uint64_t cprman_read(void *opaque, hwaddr offset, > unsigned size) > { > BCM2835CprmanState *s = CPRMAN(opaque); > uint64_t r = 0; > size_t idx = offset / sizeof(uint32_t); > > switch (idx) { > + case R_CM_LOCK: > + r = get_cm_lock(s); > + break; > + > default: > r = s->regs[idx]; > } > > trace_bcm2835_cprman_read(offset, r); >
diff --git a/include/hw/misc/bcm2835_cprman_internals.h b/include/hw/misc/bcm2835_cprman_internals.h index 5cfa849492..22a2500ab0 100644 --- a/include/hw/misc/bcm2835_cprman_internals.h +++ b/include/hw/misc/bcm2835_cprman_internals.h @@ -98,10 +98,18 @@ REG32(A2W_PLLA_FRAC, 0x1200) REG32(A2W_PLLC_FRAC, 0x1220) REG32(A2W_PLLD_FRAC, 0x1240) REG32(A2W_PLLH_FRAC, 0x1260) REG32(A2W_PLLB_FRAC, 0x12e0) +/* misc registers */ +REG32(CM_LOCK, 0x114) + FIELD(CM_LOCK, FLOCKH, 12, 1) + FIELD(CM_LOCK, FLOCKD, 11, 1) + FIELD(CM_LOCK, FLOCKC, 10, 1) + FIELD(CM_LOCK, FLOCKB, 9, 1) + FIELD(CM_LOCK, FLOCKA, 8, 1) + /* * This field is common to all registers. Each register write value must match * the CPRMAN_PASSWORD magic value in its 8 MSB. */ FIELD(CPRMAN, PASSWORD, 24, 8) diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c index ad71d30a86..ba82522eb1 100644 --- a/hw/misc/bcm2835_cprman.c +++ b/hw/misc/bcm2835_cprman.c @@ -48,13 +48,51 @@ #include "hw/misc/bcm2835_cprman_internals.h" #include "trace.h" /* PLL */ +static bool pll_is_locked(const CprmanPLLState *pll) +{ + return !FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PWRDN) + && !FIELD_EX32(*pll->reg_cm, CM_PLLx, ANARST); +} + static void pll_update(CprmanPLLState *pll) { - clock_update(pll->out, 0); + uint64_t freq, ndiv, fdiv, pdiv; + + if (!pll_is_locked(pll)) { + clock_update(pll->out, 0); + return; + } + + pdiv = FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, PDIV); + + if (!pdiv) { + clock_update(pll->out, 0); + return; + } + + ndiv = FIELD_EX32(*pll->reg_a2w_ctrl, A2W_PLLx_CTRL, NDIV); + fdiv = FIELD_EX32(*pll->reg_a2w_frac, A2W_PLLx_FRAC, FRAC); + + if (pll->reg_a2w_ana[1] & pll->prediv_mask) { + /* The prescaler doubles the parent frequency */ + ndiv *= 2; + fdiv *= 2; + } + + /* + * We have a multiplier with an integer part (ndiv) and a fractional part + * (fdiv), and a divider (pdiv). + */ + freq = clock_get_hz(pll->xosc_in) * + ((ndiv << R_A2W_PLLx_FRAC_FRAC_LENGTH) + fdiv); + freq /= pdiv; + freq >>= R_A2W_PLLx_FRAC_FRAC_LENGTH; + + clock_update_hz(pll->out, freq); } static void pll_xosc_update(void *opaque) { pll_update(CPRMAN_PLL(opaque)); @@ -94,18 +132,42 @@ static const TypeInfo cprman_pll_info = { }; /* CPRMAN "top level" model */ +static uint32_t get_cm_lock(const BCM2835CprmanState *s) +{ + static const int CM_LOCK_MAPPING[] = { + [CPRMAN_PLLA] = R_CM_LOCK_FLOCKA_SHIFT, + [CPRMAN_PLLC] = R_CM_LOCK_FLOCKC_SHIFT, + [CPRMAN_PLLD] = R_CM_LOCK_FLOCKD_SHIFT, + [CPRMAN_PLLH] = R_CM_LOCK_FLOCKH_SHIFT, + [CPRMAN_PLLB] = R_CM_LOCK_FLOCKB_SHIFT, + }; + + uint32_t r = 0; + size_t i; + + for (i = 0; i < CPRMAN_NUM_PLL; i++) { + r |= pll_is_locked(&s->plls[i]) << CM_LOCK_MAPPING[i]; + } + + return r; +} + static uint64_t cprman_read(void *opaque, hwaddr offset, unsigned size) { BCM2835CprmanState *s = CPRMAN(opaque); uint64_t r = 0; size_t idx = offset / sizeof(uint32_t); switch (idx) { + case R_CM_LOCK: + r = get_cm_lock(s); + break; + default: r = s->regs[idx]; } trace_bcm2835_cprman_read(offset, r);
The cprman PLLs generate a clock based on a prescaler, a multiplier and a divider. The prescaler doubles the parent (xosc) frequency, then the multiplier/divider are applied. The multiplier has an integer and a fractionnal part. This commit also implements the cprman CM_LOCK register. This register reports which PLL is currently locked. We consider a PLL has being locked as soon as it is enabled (on real hardware, there is a delay after turning a PLL on, for it to stabilise). Signed-off-by: Luc Michel <luc@lmichel.fr> --- include/hw/misc/bcm2835_cprman_internals.h | 8 +++ hw/misc/bcm2835_cprman.c | 64 +++++++++++++++++++++- 2 files changed, 71 insertions(+), 1 deletion(-)