diff mbox series

dt-bindings: fxas21002c: convert bindings to yaml

Message ID 20201013131545.503434-1-rmfrfs@gmail.com (mailing list archive)
State New, archived
Headers show
Series dt-bindings: fxas21002c: convert bindings to yaml | expand

Commit Message

Rui Miguel Silva Oct. 13, 2020, 1:15 p.m. UTC
Convert fxas21002c gyroscope sensor bindings documentation to
yaml schema and remove the textual bindings document.

Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
---
 .../bindings/iio/gyroscope/nxp,fxas21002c.txt | 31 --------
 .../iio/gyroscope/nxp,fxas21002c.yaml         | 77 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 78 insertions(+), 32 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
 create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml

Comments

Jonathan Cameron Oct. 13, 2020, 3:34 p.m. UTC | #1
On Tue, 13 Oct 2020 14:15:45 +0100
Rui Miguel Silva <rui.silva@linaro.org> wrote:

> Convert fxas21002c gyroscope sensor bindings documentation to
> yaml schema and remove the textual bindings document.
> 
> Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>

Hi Rui,

Always good to see a yaml conversion.

Comments inline...

> ---
>  .../bindings/iio/gyroscope/nxp,fxas21002c.txt | 31 --------
>  .../iio/gyroscope/nxp,fxas21002c.yaml         | 77 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 78 insertions(+), 32 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
>  create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
> deleted file mode 100644
> index 465e104bbf14..000000000000
> --- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -* NXP FXAS21002C Gyroscope device tree bindings
> -
> -http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
> -
> -Required properties:
> -  - compatible : should be "nxp,fxas21002c"
> -  - reg : the I2C address of the sensor or SPI chip select number for the
> -          device.
> -  - vdd-supply: phandle to the regulator that provides power to the sensor.
> -  - vddio-supply: phandle to the regulator that provides power to the bus.
> -
> -Optional properties:
> -  - reset-gpios : gpio used to reset the device, see gpio/gpio.txt
> -  - interrupts : device support 2 interrupts, INT1 and INT2,
> -                 the interrupts can be triggered on rising or falling edges.
> -                 See interrupt-controller/interrupts.txt
> -  - interrupt-names: should contain "INT1" or "INT2", the gyroscope interrupt
> -                     line in use.
> -  - drive-open-drain: the interrupt/data ready line will be configured
> -                      as open drain, which is useful if several sensors share
> -                      the same interrupt line. This is a boolean property.
> -                      (This binding is taken from pinctrl/pinctrl-bindings.txt)
> -
> -Example:
> -
> -gyroscope@20 {
> -	compatible = "nxp,fxas21002c";
> -	reg = <0x20>;
> -	vdd-supply = <&reg_peri_3p15v>;
> -	vddio-supply = <&reg_peri_3p15v>;
> -};
> diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
> new file mode 100644
> index 000000000000..7680e97cf1d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/gyroscope/nxp,fxas21002c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP FXAS21002C Gyroscope Unit

Why Unit? Gyroscope seems fine to me.

> +
> +maintainers:
> +  - Rui Miguel Silva <rmfrfs@gmail.com>
> +
> +description: |
> +  3 axis digital gyroscope device with an I2C and SPI interface.

Can we document the SPI binding as well?  With an example.

> +  http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,fxas21002c

Unless we think it likely this binding is going to shortly include other options,
       const: nxp... 
(doesn't matter that much though!)

> +
> +  reg:
> +    maxItems: 1
> +    description: base address of the device

No it isn't. It is the i2c address. Also this is standard so no description needed.


> +
> +  vdd-supply:
> +    description: Regulator that provides power to the sensor
> +
> +  vddio-supply:
> +    description: Regulator that provides power to the bus
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: GPIO connected to reset
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2
> +    description: device support 2 interrupts,
I'd argue that's obvious from the maxItems. So no need to repeat it.


 INT1 and INT2,
This part is clear form interrupt-names so again, I wouldn't say it again.

 the interrupts can
> +                 be triggered on rising or falling edges.
This last bit is useful so I would have just this or something like

Either interrupt may be triggered on rising or falling edges.

> +
> +  interrupt-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      enum:
> +        - INT1
> +        - INT2
> +    description: gyroscope interrupt line in use.

Singular with 2 interrupts.  Personally I'd just drop the description as not
adding anything.

> +
> +  drive-open-drain:
> +    type: boolean
> +    description: the interrupt/data ready line will be configured as open drain,
> +                 which is useful if several sensors share the same interrupt
> +                 line.
> +
> +required:
> +  - compatible
> +  - reg
> +  - vdd-supply

Why required?  If it's hard wired on will a stub regulator not work fine
with this device.  Do we need to read it's voltage or similar?

> +  - vddio-supply
> +
> +unevaluatedProperties: false

Why unevalutatedProperties rather than additionalProperties?
I'll confess I don't really understand when to use unevaluatedProperties.
I'm guessing issue here is we don't have the SPI bindings stuff?

> +
> +examples:
> +  - |
> +    i2c0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        gyroscope@20 {
> +          compatible = "nxp,fxas21002c";
> +          reg = <0x20>;
> +
> +          vdd-supply = <&reg_peri_3p15v>;
> +          vddio-supply = <&reg_peri_3p15v>;
> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6594f0966716..2e85e114c9c3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12469,7 +12469,7 @@ NXP FXAS21002C DRIVER
>  M:	Rui Miguel Silva <rmfrfs@gmail.com>
>  L:	linux-iio@vger.kernel.org
>  S:	Maintained
> -F:	Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
> +F:	Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
>  F:	drivers/iio/gyro/fxas21002c.h
>  F:	drivers/iio/gyro/fxas21002c_core.c
>  F:	drivers/iio/gyro/fxas21002c_i2c.c
Rui Miguel Silva Oct. 13, 2020, 8:54 p.m. UTC | #2
Hi Jonathan,
On Tue, Oct 13, 2020 at 04:34:31PM +0100, Jonathan Cameron wrote:
> On Tue, 13 Oct 2020 14:15:45 +0100
> Rui Miguel Silva <rui.silva@linaro.org> wrote:
> 
> > Convert fxas21002c gyroscope sensor bindings documentation to
> > yaml schema and remove the textual bindings document.
> > 
> > Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
> 
> Hi Rui,
> 
> Always good to see a yaml conversion.
> 
> Comments inline...

Thanks for the review, I will address all your comments, just a small
note bellow regarding the unevaluatedProperties.

> 
> > ---
> >  .../bindings/iio/gyroscope/nxp,fxas21002c.txt | 31 --------
> >  .../iio/gyroscope/nxp,fxas21002c.yaml         | 77 +++++++++++++++++++
> >  MAINTAINERS                                   |  2 +-
> >  3 files changed, 78 insertions(+), 32 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
> >  create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
> > deleted file mode 100644
> > index 465e104bbf14..000000000000
> > --- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
> > +++ /dev/null
> > @@ -1,31 +0,0 @@
> > -* NXP FXAS21002C Gyroscope device tree bindings
> > -
> > -http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
> > -
> > -Required properties:
> > -  - compatible : should be "nxp,fxas21002c"
> > -  - reg : the I2C address of the sensor or SPI chip select number for the
> > -          device.
> > -  - vdd-supply: phandle to the regulator that provides power to the sensor.
> > -  - vddio-supply: phandle to the regulator that provides power to the bus.
> > -
> > -Optional properties:
> > -  - reset-gpios : gpio used to reset the device, see gpio/gpio.txt
> > -  - interrupts : device support 2 interrupts, INT1 and INT2,
> > -                 the interrupts can be triggered on rising or falling edges.
> > -                 See interrupt-controller/interrupts.txt
> > -  - interrupt-names: should contain "INT1" or "INT2", the gyroscope interrupt
> > -                     line in use.
> > -  - drive-open-drain: the interrupt/data ready line will be configured
> > -                      as open drain, which is useful if several sensors share
> > -                      the same interrupt line. This is a boolean property.
> > -                      (This binding is taken from pinctrl/pinctrl-bindings.txt)
> > -
> > -Example:
> > -
> > -gyroscope@20 {
> > -	compatible = "nxp,fxas21002c";
> > -	reg = <0x20>;
> > -	vdd-supply = <&reg_peri_3p15v>;
> > -	vddio-supply = <&reg_peri_3p15v>;
> > -};
> > diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
> > new file mode 100644
> > index 000000000000..7680e97cf1d9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
> > @@ -0,0 +1,77 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/gyroscope/nxp,fxas21002c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP FXAS21002C Gyroscope Unit
> 
> Why Unit? Gyroscope seems fine to me.
> 
> > +
> > +maintainers:
> > +  - Rui Miguel Silva <rmfrfs@gmail.com>
> > +
> > +description: |
> > +  3 axis digital gyroscope device with an I2C and SPI interface.
> 
> Can we document the SPI binding as well?  With an example.
> 
> > +  http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - nxp,fxas21002c
> 
> Unless we think it likely this binding is going to shortly include other options,
>        const: nxp... 
> (doesn't matter that much though!)
> 
> > +
> > +  reg:
> > +    maxItems: 1
> > +    description: base address of the device
> 
> No it isn't. It is the i2c address. Also this is standard so no description needed.
> 
> 
> > +
> > +  vdd-supply:
> > +    description: Regulator that provides power to the sensor
> > +
> > +  vddio-supply:
> > +    description: Regulator that provides power to the bus
> > +
> > +  reset-gpios:
> > +    maxItems: 1
> > +    description: GPIO connected to reset
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 2
> > +    description: device support 2 interrupts,
> I'd argue that's obvious from the maxItems. So no need to repeat it.
> 
> 
>  INT1 and INT2,
> This part is clear form interrupt-names so again, I wouldn't say it again.
> 
>  the interrupts can
> > +                 be triggered on rising or falling edges.
> This last bit is useful so I would have just this or something like
> 
> Either interrupt may be triggered on rising or falling edges.
> 
> > +
> > +  interrupt-names:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      enum:
> > +        - INT1
> > +        - INT2
> > +    description: gyroscope interrupt line in use.
> 
> Singular with 2 interrupts.  Personally I'd just drop the description as not
> adding anything.
> 
> > +
> > +  drive-open-drain:
> > +    type: boolean
> > +    description: the interrupt/data ready line will be configured as open drain,
> > +                 which is useful if several sensors share the same interrupt
> > +                 line.
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - vdd-supply
> 
> Why required?  If it's hard wired on will a stub regulator not work fine
> with this device.  Do we need to read it's voltage or similar?
> 
> > +  - vddio-supply
> > +
> > +unevaluatedProperties: false
> 
> Why unevalutatedProperties rather than additionalProperties?
> I'll confess I don't really understand when to use unevaluatedProperties.

Yeah, it is not very clear also to me, I was just following this
clean up series from Rob, and from my understanding here is a case for
unevaluatedProperties. But maybe I got it all wrong.

Cheers,
   Rui

> I'm guessing issue here is we don't have the SPI bindings stuff?
> 
> > +
> > +examples:
> > +  - |
> > +    i2c0 {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        gyroscope@20 {
> > +          compatible = "nxp,fxas21002c";
> > +          reg = <0x20>;
> > +
> > +          vdd-supply = <&reg_peri_3p15v>;
> > +          vddio-supply = <&reg_peri_3p15v>;
> > +        };
> > +    };
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 6594f0966716..2e85e114c9c3 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -12469,7 +12469,7 @@ NXP FXAS21002C DRIVER
> >  M:	Rui Miguel Silva <rmfrfs@gmail.com>
> >  L:	linux-iio@vger.kernel.org
> >  S:	Maintained
> > -F:	Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
> > +F:	Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
> >  F:	drivers/iio/gyro/fxas21002c.h
> >  F:	drivers/iio/gyro/fxas21002c_core.c
> >  F:	drivers/iio/gyro/fxas21002c_i2c.c
>
Rui Miguel Silva Oct. 13, 2020, 9:47 p.m. UTC | #3
Hi Jonathan,
forgot the link bellow...

On Tue, Oct 13, 2020 at 09:54:06PM +0100, Rui Miguel Silva wrote:
> Hi Jonathan,
> On Tue, Oct 13, 2020 at 04:34:31PM +0100, Jonathan Cameron wrote:
> > On Tue, 13 Oct 2020 14:15:45 +0100
> > Rui Miguel Silva <rui.silva@linaro.org> wrote:
> > 
> > > Convert fxas21002c gyroscope sensor bindings documentation to
> > > yaml schema and remove the textual bindings document.
> > > 
> > > Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
> > 
> > Hi Rui,
> > 
> > Always good to see a yaml conversion.
> > 
> > Comments inline...
> 
> Thanks for the review, I will address all your comments, just a small
> note bellow regarding the unevaluatedProperties.
> 
> > 
> > > ---
> > >  .../bindings/iio/gyroscope/nxp,fxas21002c.txt | 31 --------
> > >  .../iio/gyroscope/nxp,fxas21002c.yaml         | 77 +++++++++++++++++++
> > >  MAINTAINERS                                   |  2 +-
> > >  3 files changed, 78 insertions(+), 32 deletions(-)
> > >  delete mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
> > >  create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
> > > deleted file mode 100644
> > > index 465e104bbf14..000000000000
> > > --- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
> > > +++ /dev/null
> > > @@ -1,31 +0,0 @@
> > > -* NXP FXAS21002C Gyroscope device tree bindings
> > > -
> > > -http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
> > > -
> > > -Required properties:
> > > -  - compatible : should be "nxp,fxas21002c"
> > > -  - reg : the I2C address of the sensor or SPI chip select number for the
> > > -          device.
> > > -  - vdd-supply: phandle to the regulator that provides power to the sensor.
> > > -  - vddio-supply: phandle to the regulator that provides power to the bus.
> > > -
> > > -Optional properties:
> > > -  - reset-gpios : gpio used to reset the device, see gpio/gpio.txt
> > > -  - interrupts : device support 2 interrupts, INT1 and INT2,
> > > -                 the interrupts can be triggered on rising or falling edges.
> > > -                 See interrupt-controller/interrupts.txt
> > > -  - interrupt-names: should contain "INT1" or "INT2", the gyroscope interrupt
> > > -                     line in use.
> > > -  - drive-open-drain: the interrupt/data ready line will be configured
> > > -                      as open drain, which is useful if several sensors share
> > > -                      the same interrupt line. This is a boolean property.
> > > -                      (This binding is taken from pinctrl/pinctrl-bindings.txt)
> > > -
> > > -Example:
> > > -
> > > -gyroscope@20 {
> > > -	compatible = "nxp,fxas21002c";
> > > -	reg = <0x20>;
> > > -	vdd-supply = <&reg_peri_3p15v>;
> > > -	vddio-supply = <&reg_peri_3p15v>;
> > > -};
> > > diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
> > > new file mode 100644
> > > index 000000000000..7680e97cf1d9
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
> > > @@ -0,0 +1,77 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/iio/gyroscope/nxp,fxas21002c.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: NXP FXAS21002C Gyroscope Unit
> > 
> > Why Unit? Gyroscope seems fine to me.
> > 
> > > +
> > > +maintainers:
> > > +  - Rui Miguel Silva <rmfrfs@gmail.com>
> > > +
> > > +description: |
> > > +  3 axis digital gyroscope device with an I2C and SPI interface.
> > 
> > Can we document the SPI binding as well?  With an example.
> > 
> > > +  http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - nxp,fxas21002c
> > 
> > Unless we think it likely this binding is going to shortly include other options,
> >        const: nxp... 
> > (doesn't matter that much though!)
> > 
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +    description: base address of the device
> > 
> > No it isn't. It is the i2c address. Also this is standard so no description needed.
> > 
> > 
> > > +
> > > +  vdd-supply:
> > > +    description: Regulator that provides power to the sensor
> > > +
> > > +  vddio-supply:
> > > +    description: Regulator that provides power to the bus
> > > +
> > > +  reset-gpios:
> > > +    maxItems: 1
> > > +    description: GPIO connected to reset
> > > +
> > > +  interrupts:
> > > +    minItems: 1
> > > +    maxItems: 2
> > > +    description: device support 2 interrupts,
> > I'd argue that's obvious from the maxItems. So no need to repeat it.
> > 
> > 
> >  INT1 and INT2,
> > This part is clear form interrupt-names so again, I wouldn't say it again.
> > 
> >  the interrupts can
> > > +                 be triggered on rising or falling edges.
> > This last bit is useful so I would have just this or something like
> > 
> > Either interrupt may be triggered on rising or falling edges.
> > 
> > > +
> > > +  interrupt-names:
> > > +    minItems: 1
> > > +    maxItems: 2
> > > +    items:
> > > +      enum:
> > > +        - INT1
> > > +        - INT2
> > > +    description: gyroscope interrupt line in use.
> > 
> > Singular with 2 interrupts.  Personally I'd just drop the description as not
> > adding anything.
> > 
> > > +
> > > +  drive-open-drain:
> > > +    type: boolean
> > > +    description: the interrupt/data ready line will be configured as open drain,
> > > +                 which is useful if several sensors share the same interrupt
> > > +                 line.
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - vdd-supply
> > 
> > Why required?  If it's hard wired on will a stub regulator not work fine
> > with this device.  Do we need to read it's voltage or similar?
> > 
> > > +  - vddio-supply
> > > +
> > > +unevaluatedProperties: false
> > 
> > Why unevalutatedProperties rather than additionalProperties?
> > I'll confess I don't really understand when to use unevaluatedProperties.
> 
> Yeah, it is not very clear also to me, I was just following this
> clean up series from Rob, and from my understanding here is a case for

here is the missing link to the clean up series:
https://lkml.kernel.org/lkml/20201006100036.00007ec7@Huawei.com/T/

Cheers,
   Rui

> unevaluatedProperties. But maybe I got it all wrong.
> 
> Cheers,
>    Rui
> 
> > I'm guessing issue here is we don't have the SPI bindings stuff?
> > 
> > > +
> > > +examples:
> > > +  - |
> > > +    i2c0 {
> > > +        #address-cells = <1>;
> > > +        #size-cells = <0>;
> > > +
> > > +        gyroscope@20 {
> > > +          compatible = "nxp,fxas21002c";
> > > +          reg = <0x20>;
> > > +
> > > +          vdd-supply = <&reg_peri_3p15v>;
> > > +          vddio-supply = <&reg_peri_3p15v>;
> > > +        };
> > > +    };
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 6594f0966716..2e85e114c9c3 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -12469,7 +12469,7 @@ NXP FXAS21002C DRIVER
> > >  M:	Rui Miguel Silva <rmfrfs@gmail.com>
> > >  L:	linux-iio@vger.kernel.org
> > >  S:	Maintained
> > > -F:	Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
> > > +F:	Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
> > >  F:	drivers/iio/gyro/fxas21002c.h
> > >  F:	drivers/iio/gyro/fxas21002c_core.c
> > >  F:	drivers/iio/gyro/fxas21002c_i2c.c
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
deleted file mode 100644
index 465e104bbf14..000000000000
--- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
+++ /dev/null
@@ -1,31 +0,0 @@ 
-* NXP FXAS21002C Gyroscope device tree bindings
-
-http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
-
-Required properties:
-  - compatible : should be "nxp,fxas21002c"
-  - reg : the I2C address of the sensor or SPI chip select number for the
-          device.
-  - vdd-supply: phandle to the regulator that provides power to the sensor.
-  - vddio-supply: phandle to the regulator that provides power to the bus.
-
-Optional properties:
-  - reset-gpios : gpio used to reset the device, see gpio/gpio.txt
-  - interrupts : device support 2 interrupts, INT1 and INT2,
-                 the interrupts can be triggered on rising or falling edges.
-                 See interrupt-controller/interrupts.txt
-  - interrupt-names: should contain "INT1" or "INT2", the gyroscope interrupt
-                     line in use.
-  - drive-open-drain: the interrupt/data ready line will be configured
-                      as open drain, which is useful if several sensors share
-                      the same interrupt line. This is a boolean property.
-                      (This binding is taken from pinctrl/pinctrl-bindings.txt)
-
-Example:
-
-gyroscope@20 {
-	compatible = "nxp,fxas21002c";
-	reg = <0x20>;
-	vdd-supply = <&reg_peri_3p15v>;
-	vddio-supply = <&reg_peri_3p15v>;
-};
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
new file mode 100644
index 000000000000..7680e97cf1d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
@@ -0,0 +1,77 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/nxp,fxas21002c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FXAS21002C Gyroscope Unit
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+
+description: |
+  3 axis digital gyroscope device with an I2C and SPI interface.
+  http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
+
+properties:
+  compatible:
+    enum:
+      - nxp,fxas21002c
+
+  reg:
+    maxItems: 1
+    description: base address of the device
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to reset
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: device support 2 interrupts, INT1 and INT2, the interrupts can
+                 be triggered on rising or falling edges.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+    description: gyroscope interrupt line in use.
+
+  drive-open-drain:
+    type: boolean
+    description: the interrupt/data ready line will be configured as open drain,
+                 which is useful if several sensors share the same interrupt
+                 line.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gyroscope@20 {
+          compatible = "nxp,fxas21002c";
+          reg = <0x20>;
+
+          vdd-supply = <&reg_peri_3p15v>;
+          vddio-supply = <&reg_peri_3p15v>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 6594f0966716..2e85e114c9c3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12469,7 +12469,7 @@  NXP FXAS21002C DRIVER
 M:	Rui Miguel Silva <rmfrfs@gmail.com>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
+F:	Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
 F:	drivers/iio/gyro/fxas21002c.h
 F:	drivers/iio/gyro/fxas21002c_core.c
 F:	drivers/iio/gyro/fxas21002c_i2c.c