diff mbox series

[v2,2/3] platform/x86: thinkpad_acpi: Add support for Lenovo palm sensor

Message ID 20201020001556.388099-2-markpearson@lenovo.com (mailing list archive)
State Deferred, archived
Headers show
Series [v2,1/3] Input: add event codes for lap and palmreset proximity switches | expand

Commit Message

Mark Pearson Oct. 20, 2020, 12:15 a.m. UTC
Use input device event support for notifying userspace of palm sensor
state changes

Signed-off-by: Mark Pearson <markpearson@lenovo.com>
---
 drivers/platform/x86/thinkpad_acpi.c | 99 +++++++++++++++++++++++++++-
 1 file changed, 97 insertions(+), 2 deletions(-)

Comments

Hans de Goede Oct. 25, 2020, 12:04 p.m. UTC | #1
Hi,

On 10/20/20 2:15 AM, Mark Pearson wrote:
> Use input device event support for notifying userspace of palm sensor
> state changes
> 
> Signed-off-by: Mark Pearson <markpearson@lenovo.com>
> ---
>  drivers/platform/x86/thinkpad_acpi.c | 99 +++++++++++++++++++++++++++-
>  1 file changed, 97 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
> index eae3579f106f..5ddf2775fb06 100644
> --- a/drivers/platform/x86/thinkpad_acpi.c
> +++ b/drivers/platform/x86/thinkpad_acpi.c
> @@ -4013,6 +4013,7 @@ static bool hotkey_notify_usrevent(const u32 hkey,
>  }
>  
>  static void thermal_dump_all_sensors(void);
> +static void proxsensor_refresh(void);
>  
>  static bool hotkey_notify_6xxx(const u32 hkey,
>  				 bool *send_acpi_ev,
> @@ -4079,8 +4080,8 @@ static bool hotkey_notify_6xxx(const u32 hkey,
>  
>  	case TP_HKEY_EV_PALM_DETECTED:
>  	case TP_HKEY_EV_PALM_UNDETECTED:
> -		/* palm detected hovering the keyboard, forward to user-space
> -		 * via netlink for consumption */
> +		/* palm detected  - pass on to event handler */
> +		proxsensor_refresh();
>  		return true;
>  
>  	default:
> @@ -9918,6 +9919,96 @@ static struct ibm_struct dytc_driver_data = {
>  	.exit = dytc_exit,
>  };
>  
> +/*************************************************************************
> + * Proximity sensor subdriver
> + */
> +
> +#define PALMSENSOR_PRESENT_BIT 0 /* Determine if psensor present */
> +#define PALMSENSOR_ON_BIT      1 /* psensor status */
> +
> +struct input_dev *tpacpi_sw_dev;
> +bool has_palmsensor;
> +bool palmsensor_state;

There is no need to make palmsensor_state global, see below.

> +
> +static int palmsensor_get(bool *present, bool *state)
> +{
> +	acpi_handle psensor_handle;
> +	int output;
> +
> +	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "GPSS", &psensor_handle)))
> +		return -ENODEV;
> +	if (!acpi_evalf(psensor_handle, &output, NULL, "d"))
> +		return -EIO;
> +
> +	*present = output & BIT(PALMSENSOR_PRESENT_BIT) ? true : false;
> +	*state = output & BIT(PALMSENSOR_ON_BIT) ? true : false;
> +	return 0;
> +}
> +
> +static void proxsensor_refresh(void)
> +{
> +	bool new_state;
> +	int err;
> +
> +	if (has_palmsensor) {
> +		err = palmsensor_get(&has_palmsensor, &new_state);
> +		if (err)
> +			return;
> +		if (new_state != palmsensor_state) {
> +			input_report_switch(tpacpi_sw_dev, SW_PALMREST_PROXIMITY, new_state);
> +			input_sync(tpacpi_sw_dev);
> +			palmsensor_state = new_state;
> +		}

There is no need for the whole new_state / orig_state dance here, the input subsys
will only send events to userspace if anything has actually changed, so you can just
write the following here:

		err = palmsensor_get(&has_palmsensor, &new_state);
		if (err)
			return;

		input_report_switch(tpacpi_sw_dev, SW_PALMREST_PROXIMITY, new_state);
		input_sync(tpacpi_sw_dev);

> +	}
> +}
> +
> +static int tpacpi_proxsensor_init(struct ibm_init_struct *iibm)
> +{
> +	int palm_err;
> +
> +	palm_err = palmsensor_get(&has_palmsensor, &palmsensor_state);
> +	/* If support isn't available (ENODEV) then don't return an error */
> +	if (palm_err == -ENODEV)
> +		return 0;

If you return 1 here, then this new-module will not be added
to the tpacpi_all_drivers list (which is good since it is non functional)
and then tpacpi_proxsensor_exit will also be skipped.

> +	/* For all other errors we can flag the failure */
> +	if (palm_err)
> +		return palm_err;
> +
> +	if (has_palmsensor) {
> +		tpacpi_sw_dev = input_allocate_device();
> +		if (!tpacpi_sw_dev)
> +			return -ENOMEM;
> +		tpacpi_sw_dev->name = "Thinkpad proximity switches";
> +		tpacpi_sw_dev->phys = TPACPI_DRVR_NAME "/input1";
> +		tpacpi_sw_dev->id.bustype = BUS_HOST;
> +		tpacpi_sw_dev->id.vendor = thinkpad_id.vendor;
> +		tpacpi_sw_dev->id.product = TPACPI_HKEY_INPUT_PRODUCT;
> +		tpacpi_sw_dev->id.version = TPACPI_HKEY_INPUT_VERSION;
> +		tpacpi_sw_dev->dev.parent = &tpacpi_pdev->dev;
> +
> +		if (has_palmsensor) {
> +			input_set_capability(tpacpi_sw_dev, EV_SW, SW_PALMREST_PROXIMITY);
> +			input_report_switch(tpacpi_sw_dev, SW_PALMREST_PROXIMITY, palmsensor_state);
> +		}
> +		palm_err = input_register_device(tpacpi_sw_dev);
> +		if (palm_err) {
> +			input_free_device(tpacpi_sw_dev);

Maybe do "tpacpi_sw_dev = NULL" here to avoid leaving a dangling global pointer around ?

> +			return palm_err;
> +		}

		return 0 here

> +	}
> +	return 0;

And return 1 here, as discussed above.

This will ...

> +}
> +
> +static void proxsensor_exit(void)
> +{
> +	input_unregister_device(tpacpi_sw_dev);

Avoid a NULL pointer deref here when there is no palmrest sensor.

> +	input_free_device(tpacpi_sw_dev);

The line needs to be deleted, input_free_device() is only for freeing
devices before they are registered (so in case of some error)
input_unregister_device() already does a put on the device, so also
calling input_free_device() here messes up the ref counting.

> +}
> +
> +static struct ibm_struct proxsensor_driver_data = {
> +	.name = "proximity-sensor",
> +	.exit = proxsensor_exit,
> +};
>  /****************************************************************************
>   ****************************************************************************
>   *
> @@ -10411,6 +10502,10 @@ static struct ibm_init_struct ibms_init[] __initdata = {
>  		.init = tpacpi_dytc_init,
>  		.data = &dytc_driver_data,
>  	},
> +	{
> +		.init = tpacpi_proxsensor_init,
> +		.data = &proxsensor_driver_data,
> +	},
>  };
>  
>  static int __init set_ibm_param(const char *val, const struct kernel_param *kp)
> 

Otherwise this looks good to me.

Regards,

Hans
Mark Pearson Oct. 25, 2020, 11:25 p.m. UTC | #2
Thanks Hans,

On 25/10/2020 08:04, Hans de Goede wrote:
> Hi,
> 
> On 10/20/20 2:15 AM, Mark Pearson wrote:
>> Use input device event support for notifying userspace of palm sensor
>> state changes
>>
>> Signed-off-by: Mark Pearson <markpearson@lenovo.com>
>> ---
>>   drivers/platform/x86/thinkpad_acpi.c | 99 +++++++++++++++++++++++++++-
>>   1 file changed, 97 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
>> index eae3579f106f..5ddf2775fb06 100644
>> --- a/drivers/platform/x86/thinkpad_acpi.c
>> +++ b/drivers/platform/x86/thinkpad_acpi.c
>> @@ -4013,6 +4013,7 @@ static bool hotkey_notify_usrevent(const u32 hkey,
>>   }
>>   
>>   static void thermal_dump_all_sensors(void);
>> +static void proxsensor_refresh(void);
>>   
>>   static bool hotkey_notify_6xxx(const u32 hkey,
>>   				 bool *send_acpi_ev,
>> @@ -4079,8 +4080,8 @@ static bool hotkey_notify_6xxx(const u32 hkey,
>>   
>>   	case TP_HKEY_EV_PALM_DETECTED:
>>   	case TP_HKEY_EV_PALM_UNDETECTED:
>> -		/* palm detected hovering the keyboard, forward to user-space
>> -		 * via netlink for consumption */
>> +		/* palm detected  - pass on to event handler */
>> +		proxsensor_refresh();
>>   		return true;
>>   
>>   	default:
>> @@ -9918,6 +9919,96 @@ static struct ibm_struct dytc_driver_data = {
>>   	.exit = dytc_exit,
>>   };
>>   
>> +/*************************************************************************
>> + * Proximity sensor subdriver
>> + */
>> +
>> +#define PALMSENSOR_PRESENT_BIT 0 /* Determine if psensor present */
>> +#define PALMSENSOR_ON_BIT      1 /* psensor status */
>> +
>> +struct input_dev *tpacpi_sw_dev;
>> +bool has_palmsensor;
>> +bool palmsensor_state;
> 
> There is no need to make palmsensor_state global, see below.
> 
>> +
>> +static int palmsensor_get(bool *present, bool *state)
>> +{
>> +	acpi_handle psensor_handle;
>> +	int output;
>> +
>> +	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "GPSS", &psensor_handle)))
>> +		return -ENODEV;
>> +	if (!acpi_evalf(psensor_handle, &output, NULL, "d"))
>> +		return -EIO;
>> +
>> +	*present = output & BIT(PALMSENSOR_PRESENT_BIT) ? true : false;
>> +	*state = output & BIT(PALMSENSOR_ON_BIT) ? true : false;
>> +	return 0;
>> +}
>> +
>> +static void proxsensor_refresh(void)
>> +{
>> +	bool new_state;
>> +	int err;
>> +
>> +	if (has_palmsensor) {
>> +		err = palmsensor_get(&has_palmsensor, &new_state);
>> +		if (err)
>> +			return;
>> +		if (new_state != palmsensor_state) {
>> +			input_report_switch(tpacpi_sw_dev, SW_PALMREST_PROXIMITY, new_state);
>> +			input_sync(tpacpi_sw_dev);
>> +			palmsensor_state = new_state;
>> +		}
> 
> There is no need for the whole new_state / orig_state dance here, the input subsys
> will only send events to userspace if anything has actually changed, so you can just
> write the following here:
> 
> 		err = palmsensor_get(&has_palmsensor, &new_state);
> 		if (err)
> 			return;
> 
> 		input_report_switch(tpacpi_sw_dev, SW_PALMREST_PROXIMITY, new_state);
> 		input_sync(tpacpi_sw_dev);
> 
Ah - got it. Thanks!

>> +	}
>> +}
>> +
>> +static int tpacpi_proxsensor_init(struct ibm_init_struct *iibm)
>> +{
>> +	int palm_err;
>> +
>> +	palm_err = palmsensor_get(&has_palmsensor, &palmsensor_state);
>> +	/* If support isn't available (ENODEV) then don't return an error */
>> +	if (palm_err == -ENODEV)
>> +		return 0;
> 
> If you return 1 here, then this new-module will not be added
> to the tpacpi_all_drivers list (which is good since it is non functional)
> and then tpacpi_proxsensor_exit will also be skipped.
Ah - I thought 0 would do that. Agreed and I'll change.
> 
>> +	/* For all other errors we can flag the failure */
>> +	if (palm_err)
>> +		return palm_err;
>> +
>> +	if (has_palmsensor) {
>> +		tpacpi_sw_dev = input_allocate_device();
>> +		if (!tpacpi_sw_dev)
>> +			return -ENOMEM;
>> +		tpacpi_sw_dev->name = "Thinkpad proximity switches";
>> +		tpacpi_sw_dev->phys = TPACPI_DRVR_NAME "/input1";
>> +		tpacpi_sw_dev->id.bustype = BUS_HOST;
>> +		tpacpi_sw_dev->id.vendor = thinkpad_id.vendor;
>> +		tpacpi_sw_dev->id.product = TPACPI_HKEY_INPUT_PRODUCT;
>> +		tpacpi_sw_dev->id.version = TPACPI_HKEY_INPUT_VERSION;
>> +		tpacpi_sw_dev->dev.parent = &tpacpi_pdev->dev;
>> +
>> +		if (has_palmsensor) {
>> +			input_set_capability(tpacpi_sw_dev, EV_SW, SW_PALMREST_PROXIMITY);
>> +			input_report_switch(tpacpi_sw_dev, SW_PALMREST_PROXIMITY, palmsensor_state);
>> +		}
>> +		palm_err = input_register_device(tpacpi_sw_dev);
>> +		if (palm_err) {
>> +			input_free_device(tpacpi_sw_dev);
> 
> Maybe do "tpacpi_sw_dev = NULL" here to avoid leaving a dangling global pointer around ?
Agreed - Will do
> 
>> +			return palm_err;
>> +		}
> 
> 		return 0 here
> 
>> +	}
>> +	return 0;
> 
> And return 1 here, as discussed above.
Ack
> 
> This will ...
> 
>> +}
>> +
>> +static void proxsensor_exit(void)
>> +{
>> +	input_unregister_device(tpacpi_sw_dev);
> 
> Avoid a NULL pointer deref here when there is no palmrest sensor.
> 
>> +	input_free_device(tpacpi_sw_dev);
> 
> The line needs to be deleted, input_free_device() is only for freeing
> devices before they are registered (so in case of some error)
> input_unregister_device() already does a put on the device, so also
> calling input_free_device() here messes up the ref counting.
My bad. Will fix.

> 
>> +}
>> +
>> +static struct ibm_struct proxsensor_driver_data = {
>> +	.name = "proximity-sensor",
>> +	.exit = proxsensor_exit,
>> +};
>>   /****************************************************************************
>>    ****************************************************************************
>>    *
>> @@ -10411,6 +10502,10 @@ static struct ibm_init_struct ibms_init[] __initdata = {
>>   		.init = tpacpi_dytc_init,
>>   		.data = &dytc_driver_data,
>>   	},
>> +	{
>> +		.init = tpacpi_proxsensor_init,
>> +		.data = &proxsensor_driver_data,
>> +	},
>>   };
>>   
>>   static int __init set_ibm_param(const char *val, const struct kernel_param *kp)
>>
> 
> Otherwise this looks good to me.
> 
> Regards,
> 
> Hans
> 
Thanks for the review. I'll get those fixes in ASAP
Mark
diff mbox series

Patch

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index eae3579f106f..5ddf2775fb06 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -4013,6 +4013,7 @@  static bool hotkey_notify_usrevent(const u32 hkey,
 }
 
 static void thermal_dump_all_sensors(void);
+static void proxsensor_refresh(void);
 
 static bool hotkey_notify_6xxx(const u32 hkey,
 				 bool *send_acpi_ev,
@@ -4079,8 +4080,8 @@  static bool hotkey_notify_6xxx(const u32 hkey,
 
 	case TP_HKEY_EV_PALM_DETECTED:
 	case TP_HKEY_EV_PALM_UNDETECTED:
-		/* palm detected hovering the keyboard, forward to user-space
-		 * via netlink for consumption */
+		/* palm detected  - pass on to event handler */
+		proxsensor_refresh();
 		return true;
 
 	default:
@@ -9918,6 +9919,96 @@  static struct ibm_struct dytc_driver_data = {
 	.exit = dytc_exit,
 };
 
+/*************************************************************************
+ * Proximity sensor subdriver
+ */
+
+#define PALMSENSOR_PRESENT_BIT 0 /* Determine if psensor present */
+#define PALMSENSOR_ON_BIT      1 /* psensor status */
+
+struct input_dev *tpacpi_sw_dev;
+bool has_palmsensor;
+bool palmsensor_state;
+
+static int palmsensor_get(bool *present, bool *state)
+{
+	acpi_handle psensor_handle;
+	int output;
+
+	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "GPSS", &psensor_handle)))
+		return -ENODEV;
+	if (!acpi_evalf(psensor_handle, &output, NULL, "d"))
+		return -EIO;
+
+	*present = output & BIT(PALMSENSOR_PRESENT_BIT) ? true : false;
+	*state = output & BIT(PALMSENSOR_ON_BIT) ? true : false;
+	return 0;
+}
+
+static void proxsensor_refresh(void)
+{
+	bool new_state;
+	int err;
+
+	if (has_palmsensor) {
+		err = palmsensor_get(&has_palmsensor, &new_state);
+		if (err)
+			return;
+		if (new_state != palmsensor_state) {
+			input_report_switch(tpacpi_sw_dev, SW_PALMREST_PROXIMITY, new_state);
+			input_sync(tpacpi_sw_dev);
+			palmsensor_state = new_state;
+		}
+	}
+}
+
+static int tpacpi_proxsensor_init(struct ibm_init_struct *iibm)
+{
+	int palm_err;
+
+	palm_err = palmsensor_get(&has_palmsensor, &palmsensor_state);
+	/* If support isn't available (ENODEV) then don't return an error */
+	if (palm_err == -ENODEV)
+		return 0;
+	/* For all other errors we can flag the failure */
+	if (palm_err)
+		return palm_err;
+
+	if (has_palmsensor) {
+		tpacpi_sw_dev = input_allocate_device();
+		if (!tpacpi_sw_dev)
+			return -ENOMEM;
+		tpacpi_sw_dev->name = "Thinkpad proximity switches";
+		tpacpi_sw_dev->phys = TPACPI_DRVR_NAME "/input1";
+		tpacpi_sw_dev->id.bustype = BUS_HOST;
+		tpacpi_sw_dev->id.vendor = thinkpad_id.vendor;
+		tpacpi_sw_dev->id.product = TPACPI_HKEY_INPUT_PRODUCT;
+		tpacpi_sw_dev->id.version = TPACPI_HKEY_INPUT_VERSION;
+		tpacpi_sw_dev->dev.parent = &tpacpi_pdev->dev;
+
+		if (has_palmsensor) {
+			input_set_capability(tpacpi_sw_dev, EV_SW, SW_PALMREST_PROXIMITY);
+			input_report_switch(tpacpi_sw_dev, SW_PALMREST_PROXIMITY, palmsensor_state);
+		}
+		palm_err = input_register_device(tpacpi_sw_dev);
+		if (palm_err) {
+			input_free_device(tpacpi_sw_dev);
+			return palm_err;
+		}
+	}
+	return 0;
+}
+
+static void proxsensor_exit(void)
+{
+	input_unregister_device(tpacpi_sw_dev);
+	input_free_device(tpacpi_sw_dev);
+}
+
+static struct ibm_struct proxsensor_driver_data = {
+	.name = "proximity-sensor",
+	.exit = proxsensor_exit,
+};
 /****************************************************************************
  ****************************************************************************
  *
@@ -10411,6 +10502,10 @@  static struct ibm_init_struct ibms_init[] __initdata = {
 		.init = tpacpi_dytc_init,
 		.data = &dytc_driver_data,
 	},
+	{
+		.init = tpacpi_proxsensor_init,
+		.data = &proxsensor_driver_data,
+	},
 };
 
 static int __init set_ibm_param(const char *val, const struct kernel_param *kp)