diff mbox series

[v4,1/3] dt-bindings: media: atmel: csi2dc: add bindings for microchip csi2dc

Message ID 20201110151116.161260-1-eugen.hristev@microchip.com (mailing list archive)
State New, archived
Headers show
Series [v4,1/3] dt-bindings: media: atmel: csi2dc: add bindings for microchip csi2dc | expand

Commit Message

Eugen Hristev Nov. 10, 2020, 3:11 p.m. UTC
Add bindings documentation for Microchip CSI2 Demultiplexer controller.

CSI2DC is a demultiplexer from Synopsys IDI interface specification to
parallel interface connection or direct memory access.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Changes in v4:
- Removed property for inter-line-delay and for clock continuous/non-continuous
- Removed virtual channel by reg for second endpoint

Changes in v3:
- Removed some text from description, as it was explained in the schema
- fixed other things as per Rob's review
- moved some text inside the schema, like the clock description

Changes in v2:
- fixed warnings reported by dt_binding_check

 .../bindings/media/microchip,csi2dc.yaml      | 144 ++++++++++++++++++
 1 file changed, 144 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/microchip,csi2dc.yaml

Comments

Rob Herring Nov. 11, 2020, 7:07 p.m. UTC | #1
On Tue, 10 Nov 2020 17:11:14 +0200, Eugen Hristev wrote:
> Add bindings documentation for Microchip CSI2 Demultiplexer controller.
> 
> CSI2DC is a demultiplexer from Synopsys IDI interface specification to
> parallel interface connection or direct memory access.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
> Changes in v4:
> - Removed property for inter-line-delay and for clock continuous/non-continuous
> - Removed virtual channel by reg for second endpoint
> 
> Changes in v3:
> - Removed some text from description, as it was explained in the schema
> - fixed other things as per Rob's review
> - moved some text inside the schema, like the clock description
> 
> Changes in v2:
> - fixed warnings reported by dt_binding_check
> 
>  .../bindings/media/microchip,csi2dc.yaml      | 144 ++++++++++++++++++
>  1 file changed, 144 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml: 'additionalProperties' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/media/microchip,csi2dc.yaml


See https://patchwork.ozlabs.org/patch/1397687

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Rob Herring Nov. 11, 2020, 7:15 p.m. UTC | #2
On Tue, Nov 10, 2020 at 05:11:14PM +0200, Eugen Hristev wrote:
> Add bindings documentation for Microchip CSI2 Demultiplexer controller.
> 
> CSI2DC is a demultiplexer from Synopsys IDI interface specification to
> parallel interface connection or direct memory access.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
> Changes in v4:
> - Removed property for inter-line-delay and for clock continuous/non-continuous
> - Removed virtual channel by reg for second endpoint
> 
> Changes in v3:
> - Removed some text from description, as it was explained in the schema
> - fixed other things as per Rob's review
> - moved some text inside the schema, like the clock description
> 
> Changes in v2:
> - fixed warnings reported by dt_binding_check
> 
>  .../bindings/media/microchip,csi2dc.yaml      | 144 ++++++++++++++++++
>  1 file changed, 144 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
> new file mode 100644
> index 000000000000..967e8fefe363
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
> @@ -0,0 +1,144 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/microchip,csi2dc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip CSI2 Demux Controller (CSI2DC)
> +
> +maintainers:
> +  - Eugen Hristev <eugen.hristev@microchip.com>
> +
> +description:
> +  CSI2DC - Camera Serial Interface 2 Demux Controller
> +
> +  CSI2DC is a hardware block that receives incoming data from an IDI interface
> +  and filters packets based on their data type and virtual channel identifier,
> +  then converts the byte stream into a cross clock domain to a pixel stream
> +  to a parallel interface that can be read by a sensor controller.
> +
> +  CSI2DC provides two pipes, one video pipe and one data pipe. Video pipe
> +  is connected to a sensor controller and the data pipe is accessible
> +  as a DMA slave port to a DMA controller.
> +
> +  CSI2DC supports a single 'port' node as a source pad with Synopsys 32-bit
> +  IDI interface. The connected endpoint must be a IDI interface compatible
> +  device (like Synopsys CSI2HOST) , that can provide 32-bit IDI interface
> +  connection as sink pad.
> +  For media entity and endpoints please refer to the bindings defined in
> +  Documentation/devicetree/bindings/media/video-interfaces.txt.
> +  For Synopsys IDI interface please refer to
> +  Documentation/devicetree/bindings/media/snps,dw-csi-plat.txt
> +
> +  CSI2DC supports one 'port' node as sink pad with parallel interface. This is
> +  called video pipe.
> +  This port has an 'endpoint' can then be used as a source pad for another
> +  controller (next in pipeline).
> +  Please refer to the bindings defined in
> +  Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +  CSI2DC also supports direct access to the data through AHB, via DMA channel,
> +  called data pipe.
> +  Because of this, the sink 'port' child node (second) is not mandatory.
> +  If the sink 'port' child node is missing, only data pipe is available.
> +
> +properties:
> +  compatible:
> +    const: microchip,sama7g5-csi2dc
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 2
> +
> +  clock-names:
> +    description:
> +      CSI2DC must have two clocks to function correctly. One clock is the
> +      peripheral clock for the inside functionality of the hardware block.
> +      This is named 'pclk'. The second clock must be the cross domain clock,
> +      in which CSI2DC will perform clock crossing. This clock must be fed
> +      by the next controller in pipeline, which usually is a sensor controller.
> +      Normally this clock should be given by this sensor controller who
> +      is also a clock source. This clock is named 'scck', sensor controller clock.
> +    items:
> +      - const: pclk
> +      - const: scck
> +
> +  port@0:

Put multiple 'port' nodes under a 'ports' node.

> +    type: object
> +    description:
> +      Input port node, single endpoint describing the input pad.

This:

> +
> +    properties:
> +      reg:
> +        const: 0
> +
> +      endpoint:
> +        type: object
> +
> +        properties:
> +          remote-endpoint: true
> +
> +        required:
> +          - remote-endpoint
> +
> +        additionalProperties: false
> +
> +    additionalProperties: false

...to here can be omitted.

> +
> +  port@1:
> +    type: object
> +    description:
> +      Output port node, single endpoint, describing the output pad.
> +
> +    properties:
> +      reg:
> +        const: 1
> +
> +      endpoint:
> +        type: object
> +
> +        properties:
> +          remote-endpoint: true
> +
> +        required:
> +          - remote-endpoint
> +
> +        additionalProperties: false
> +
> +    additionalProperties: false

Same here.

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - port@0
> +
> +examples:
> +  - |
> +    csi2dc@e1404000 {
> +        compatible = "microchip,sama7g5-csi2dc";
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        reg = <0xe1404000 0x500>;
> +        clocks = <&pclk>, <&scck>;
> +        clock-names = "pclk", "scck";
> +
> +        port@0 {
> +               reg = <0>; /* must be 0, first child port */
> +               csi2dc_in: endpoint { /* input from IDI interface */
> +                     remote-endpoint = <&csi2host_out>;
> +               };
> +        };
> +
> +        port@1 {
> +                reg = <1>; /* must be 1, second child port */
> +                csi2dc_out: endpoint {
> +                        remote-endpoint = <&xisc_in>; /* output to sensor controller */
> +                };
> +        };
> +    };
> +
> +...
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
new file mode 100644
index 000000000000..967e8fefe363
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
@@ -0,0 +1,144 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/microchip,csi2dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip CSI2 Demux Controller (CSI2DC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+description:
+  CSI2DC - Camera Serial Interface 2 Demux Controller
+
+  CSI2DC is a hardware block that receives incoming data from an IDI interface
+  and filters packets based on their data type and virtual channel identifier,
+  then converts the byte stream into a cross clock domain to a pixel stream
+  to a parallel interface that can be read by a sensor controller.
+
+  CSI2DC provides two pipes, one video pipe and one data pipe. Video pipe
+  is connected to a sensor controller and the data pipe is accessible
+  as a DMA slave port to a DMA controller.
+
+  CSI2DC supports a single 'port' node as a source pad with Synopsys 32-bit
+  IDI interface. The connected endpoint must be a IDI interface compatible
+  device (like Synopsys CSI2HOST) , that can provide 32-bit IDI interface
+  connection as sink pad.
+  For media entity and endpoints please refer to the bindings defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+  For Synopsys IDI interface please refer to
+  Documentation/devicetree/bindings/media/snps,dw-csi-plat.txt
+
+  CSI2DC supports one 'port' node as sink pad with parallel interface. This is
+  called video pipe.
+  This port has an 'endpoint' can then be used as a source pad for another
+  controller (next in pipeline).
+  Please refer to the bindings defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+  CSI2DC also supports direct access to the data through AHB, via DMA channel,
+  called data pipe.
+  Because of this, the sink 'port' child node (second) is not mandatory.
+  If the sink 'port' child node is missing, only data pipe is available.
+
+properties:
+  compatible:
+    const: microchip,sama7g5-csi2dc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    description:
+      CSI2DC must have two clocks to function correctly. One clock is the
+      peripheral clock for the inside functionality of the hardware block.
+      This is named 'pclk'. The second clock must be the cross domain clock,
+      in which CSI2DC will perform clock crossing. This clock must be fed
+      by the next controller in pipeline, which usually is a sensor controller.
+      Normally this clock should be given by this sensor controller who
+      is also a clock source. This clock is named 'scck', sensor controller clock.
+    items:
+      - const: pclk
+      - const: scck
+
+  port@0:
+    type: object
+    description:
+      Input port node, single endpoint describing the input pad.
+
+    properties:
+      reg:
+        const: 0
+
+      endpoint:
+        type: object
+
+        properties:
+          remote-endpoint: true
+
+        required:
+          - remote-endpoint
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+  port@1:
+    type: object
+    description:
+      Output port node, single endpoint, describing the output pad.
+
+    properties:
+      reg:
+        const: 1
+
+      endpoint:
+        type: object
+
+        properties:
+          remote-endpoint: true
+
+        required:
+          - remote-endpoint
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - port@0
+
+examples:
+  - |
+    csi2dc@e1404000 {
+        compatible = "microchip,sama7g5-csi2dc";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe1404000 0x500>;
+        clocks = <&pclk>, <&scck>;
+        clock-names = "pclk", "scck";
+
+        port@0 {
+               reg = <0>; /* must be 0, first child port */
+               csi2dc_in: endpoint { /* input from IDI interface */
+                     remote-endpoint = <&csi2host_out>;
+               };
+        };
+
+        port@1 {
+                reg = <1>; /* must be 1, second child port */
+                csi2dc_out: endpoint {
+                        remote-endpoint = <&xisc_in>; /* output to sensor controller */
+                };
+        };
+    };
+
+...