diff mbox series

[11/19] ARM: dts: sun8i: nanopi-r1: Fix GPIO regulator state array

Message ID 20210114113538.1233933-11-maxime@cerno.tech (mailing list archive)
State New, archived
Headers show
Series [01/19] dt-bindings: sunxi: Fix the pinecube compatible | expand

Commit Message

Maxime Ripard Jan. 14, 2021, 11:35 a.m. UTC 
Even though it translates to the same thing down to the binary level, we
should have an array of 2 number cells to describe each voltage state,
which in turns create a validation warning.

Let's fix this.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Jernej Škrabec Jan. 14, 2021, 8:38 p.m. UTC | #1 
Dne četrtek, 14. januar 2021 ob 12:35:30 CET je Maxime Ripard napisal(a):
> Even though it translates to the same thing down to the binary level, we
> should have an array of 2 number cells to describe each voltage state,
> which in turns create a validation warning.
> 
> Let's fix this.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>

Best regards,
Jernej
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
index 204a39f93f4e..26e2e6172e0d 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
@@ -39,8 +39,8 @@  reg_vdd_cpux: gpio-regulator {
 		regulator-ramp-delay = <50>;
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
-		states = <1100000 0x0
-			  1300000 0x1>;
+		states = <1100000 0x0>,
+			 <1300000 0x1>;
 	};
 
 	wifi_pwrseq: wifi_pwrseq {