diff mbox series

[v2] dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml

Message ID 4ece21a7e9691ed1e775fd6b0b4046b1562e44bd.1612951821.git.michal.simek@xilinx.com (mailing list archive)
State Accepted
Commit 19e1f484a6bb452d28d79cf41f280cdfde3176a9
Headers show
Series [v2] dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml | expand

Commit Message

Michal Simek Feb. 10, 2021, 10:10 a.m. UTC
Convert spi-zynq-qspi.txt to yaml.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

Changes in v2:
- s/additionalProperties: true/unevaluatedProperties: false/

 .../devicetree/bindings/spi/spi-zynq-qspi.txt | 25 --------
 .../bindings/spi/xlnx,zynq-qspi.yaml          | 59 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 3 files changed, 60 insertions(+), 25 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
 create mode 100644 Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml

Comments

Rob Herring (Arm) Feb. 10, 2021, 10:45 p.m. UTC | #1
On Wed, 10 Feb 2021 11:10:25 +0100, Michal Simek wrote:
> Convert spi-zynq-qspi.txt to yaml.
> 
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
> 
> Changes in v2:
> - s/additionalProperties: true/unevaluatedProperties: false/
> 
>  .../devicetree/bindings/spi/spi-zynq-qspi.txt | 25 --------
>  .../bindings/spi/xlnx,zynq-qspi.yaml          | 59 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  3 files changed, 60 insertions(+), 25 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
>  create mode 100644 Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Michal Simek Feb. 11, 2021, 9:37 a.m. UTC | #2
st 10. 2. 2021 v 11:10 odesílatel Michal Simek <michal.simek@xilinx.com> napsal:
>
> Convert spi-zynq-qspi.txt to yaml.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> Changes in v2:
> - s/additionalProperties: true/unevaluatedProperties: false/
>
>  .../devicetree/bindings/spi/spi-zynq-qspi.txt | 25 --------
>  .../bindings/spi/xlnx,zynq-qspi.yaml          | 59 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  3 files changed, 60 insertions(+), 25 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
>  create mode 100644 Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
>
> diff --git a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
> deleted file mode 100644
> index 16b734ad3102..000000000000
> --- a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -Xilinx Zynq QSPI controller Device Tree Bindings
> --------------------------------------------------------------------
> -
> -Required properties:
> -- compatible           : Should be "xlnx,zynq-qspi-1.0".
> -- reg                  : Physical base address and size of QSPI registers map.
> -- interrupts           : Property with a value describing the interrupt
> -                         number.
> -- clock-names          : List of input clock names - "ref_clk", "pclk"
> -                         (See clock bindings for details).
> -- clocks               : Clock phandles (see clock bindings for details).
> -
> -Optional properties:
> -- num-cs               : Number of chip selects used.
> -
> -Example:
> -       qspi: spi@e000d000 {
> -               compatible = "xlnx,zynq-qspi-1.0";
> -               reg = <0xe000d000 0x1000>;
> -               interrupt-parent = <&intc>;
> -               interrupts = <0 19 4>;
> -               clock-names = "ref_clk", "pclk";
> -               clocks = <&clkc 10>, <&clkc 43>;
> -               num-cs = <1>;
> -       };
> diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
> new file mode 100644
> index 000000000000..1f1c40a9f320
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/xlnx,zynq-qspi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx Zynq QSPI controller
> +
> +description:
> +  The Xilinx Zynq QSPI controller is used to access multi-bit serial flash
> +  memory devices.
> +
> +allOf:
> +  - $ref: "spi-controller.yaml#"
> +
> +maintainers:
> +  - Michal Simek <michal.simek@xilinx.com>
> +
> +# Everything else is described in the common file
> +properties:
> +  compatible:
> +    const: xlnx,zynq-qspi-1.0
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: reference clock
> +      - description: peripheral clock
> +
> +  clock-names:
> +    items:
> +      - const: ref_clk
> +      - const: pclk
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    spi@e000d000 {
> +        compatible = "xlnx,zynq-qspi-1.0";
> +        reg = <0xe000d000 0x1000>;
> +        interrupt-parent = <&intc>;
> +        interrupts = <0 19 4>;
> +        clock-names = "ref_clk", "pclk";
> +        clocks = <&clkc 10>, <&clkc 43>;
> +        num-cs = <1>;
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 546aa66428c9..e494b061dcd1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2766,6 +2766,7 @@ W:        http://wiki.xilinx.com
>  T:     git https://github.com/Xilinx/linux-xlnx.git
>  F:     Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
>  F:     Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
> +F:     Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
>  F:     arch/arm/mach-zynq/
>  F:     drivers/block/xsysace.c
>  F:     drivers/clocksource/timer-cadence-ttc.c
> --
> 2.30.0
>

Applied.
M
Mark Brown Feb. 11, 2021, 12:39 p.m. UTC | #3
On Thu, Feb 11, 2021 at 10:37:30AM +0100, Michal Simek wrote:
> st 10. 2. 2021 v 11:10 odesílatel Michal Simek <michal.simek@xilinx.com> napsal:

> > +description:
> > +  The Xilinx Zynq QSPI controller is used to access multi-bit serial flash
> > +  memory devices.

> Applied.

Doesn't really matter here but I would really expect subsystem binding
documents to go through the subsystem tree.
Michal Simek Feb. 11, 2021, 12:54 p.m. UTC | #4
On 2/11/21 1:39 PM, Mark Brown wrote:
> On Thu, Feb 11, 2021 at 10:37:30AM +0100, Michal Simek wrote:
>> st 10. 2. 2021 v 11:10 odesílatel Michal Simek <michal.simek@xilinx.com> napsal:
> 
>>> +description:
>>> +  The Xilinx Zynq QSPI controller is used to access multi-bit serial flash
>>> +  memory devices.
> 
>> Applied.
> 
> Doesn't really matter here but I would really expect subsystem binding
> documents to go through the subsystem tree.

Sorry about it. I will keep that in my mind for future.

Thanks,
Michal
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
deleted file mode 100644
index 16b734ad3102..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
+++ /dev/null
@@ -1,25 +0,0 @@ 
-Xilinx Zynq QSPI controller Device Tree Bindings
--------------------------------------------------------------------
-
-Required properties:
-- compatible		: Should be "xlnx,zynq-qspi-1.0".
-- reg			: Physical base address and size of QSPI registers map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-- clock-names		: List of input clock names - "ref_clk", "pclk"
-			  (See clock bindings for details).
-- clocks		: Clock phandles (see clock bindings for details).
-
-Optional properties:
-- num-cs		: Number of chip selects used.
-
-Example:
-	qspi: spi@e000d000 {
-		compatible = "xlnx,zynq-qspi-1.0";
-		reg = <0xe000d000 0x1000>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 19 4>;
-		clock-names = "ref_clk", "pclk";
-		clocks = <&clkc 10>, <&clkc 43>;
-		num-cs = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
new file mode 100644
index 000000000000..1f1c40a9f320
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
@@ -0,0 +1,59 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/xlnx,zynq-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq QSPI controller
+
+description:
+  The Xilinx Zynq QSPI controller is used to access multi-bit serial flash
+  memory devices.
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    const: xlnx,zynq-qspi-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: reference clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@e000d000 {
+        compatible = "xlnx,zynq-qspi-1.0";
+        reg = <0xe000d000 0x1000>;
+        interrupt-parent = <&intc>;
+        interrupts = <0 19 4>;
+        clock-names = "ref_clk", "pclk";
+        clocks = <&clkc 10>, <&clkc 43>;
+        num-cs = <1>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 546aa66428c9..e494b061dcd1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2766,6 +2766,7 @@  W:	http://wiki.xilinx.com
 T:	git https://github.com/Xilinx/linux-xlnx.git
 F:	Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
 F:	Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+F:	Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
 F:	arch/arm/mach-zynq/
 F:	drivers/block/xsysace.c
 F:	drivers/clocksource/timer-cadence-ttc.c