diff mbox series

[v3,1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

Message ID 20210214175211.105107-1-jagan@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series [v3,1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211 | expand

Commit Message

Jagan Teki Feb. 14, 2021, 5:52 p.m. UTC
ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.

It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.

Add dt-bingings for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v3:
- updated to new dt-bindings style

 .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
 1 file changed, 90 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml

Comments

Robert Foss Feb. 15, 2021, 11:58 a.m. UTC | #1
Hey Jagan,

Thanks for submitting this.

checkpatch.pl threw some typ-o warnings, and I listed them below. I
think either spelling is correct, but 'spelling.txt' does list this as
a typ-o explicitly, so I would suggest conforming to that just to
silence the checkpatch warning.

This patch also passes 'dt_binding_check' and 'dtbs_check', but I
think I'd like to defer to Rob Herring for an actual r-b.

On Sun, 14 Feb 2021 at 18:55, Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
>
> It has a flexible configuration of MIPI DSI signal input and
> produce RGB565, RGB666, RGB888 output format.
>
> Add dt-bingings for it.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - updated to new dt-bindings style
>
>  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
>  1 file changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> new file mode 100644
> index 000000000000..13764f13fe46
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge

$ scripts/checkpatch.pl --git HEAD~0
WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?
#7:
ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
                           ^^^^^^^^^

> +
> +maintainers:
> +  - Jagan Teki <jagan@amarulasolutions.com>
> +
> +description: |
> +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.

WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?
#38: FILE: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml:13:
+  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
                              ^^^^^^^^^


> +
> +  It has a flexible configuration of MIPI DSI signal input and
> +  produce RGB565, RGB666, RGB888 output format.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - chipone,icn6211
> +
> +  reg:
> +    maxItems: 1
> +    description: virtual channel number of a DSI peripheral
> +
> +  reset-gpios:
> +    description: GPIO connected for the reset pin
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port for MIPI DSI input
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port for MIPI DPI output (panel or connector).
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      bridge@0 {
> +        compatible = "chipone,icn6211";
> +        reg = <0>;
> +        reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          bridge_in: port@0 {
> +            reg = <0>;
> +
> +            bridge_out_dsi: endpoint {
> +              remote-endpoint = <&dsi_out_bridge>;
> +            };
> +          };
> +
> +          bridge_out: port@1 {
> +            reg = <1>;
> +
> +            bridge_out_panel: endpoint {
> +              remote-endpoint = <&panel_out_bridge>;
> +            };
> +          };
> +        };
> +      };
> +    };
> --
> 2.25.1
>
Jagan Teki Feb. 15, 2021, 12:08 p.m. UTC | #2
On Mon, Feb 15, 2021 at 5:28 PM Robert Foss <robert.foss@linaro.org> wrote:
>
> Hey Jagan,
>
> Thanks for submitting this.
>
> checkpatch.pl threw some typ-o warnings, and I listed them below. I
> think either spelling is correct, but 'spelling.txt' does list this as
> a typ-o explicitly, so I would suggest conforming to that just to
> silence the checkpatch warning.
>
> This patch also passes 'dt_binding_check' and 'dtbs_check', but I
> think I'd like to defer to Rob Herring for an actual r-b.
>
> On Sun, 14 Feb 2021 at 18:55, Jagan Teki <jagan@amarulasolutions.com> wrote:
> >
> > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> >
> > It has a flexible configuration of MIPI DSI signal input and
> > produce RGB565, RGB666, RGB888 output format.
> >
> > Add dt-bingings for it.
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > Changes for v3:
> > - updated to new dt-bindings style
> >
> >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> >  1 file changed, 90 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > new file mode 100644
> > index 000000000000..13764f13fe46
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > @@ -0,0 +1,90 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
>
> $ scripts/checkpatch.pl --git HEAD~0
> WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?

Thanks for pointing it.

I was aware of it before sending it and need to understand whether we
need to use vendor naming conversion or not. Chipone call these
devices are Convertor [1], So I have used the vendor notation for
better understanding.

Any comments are this would be welcome?

[1] http://en.chiponeic.com/content/details45_123.html

Jagan.
Laurent Pinchart Feb. 15, 2021, 12:17 p.m. UTC | #3
Hi Jagan,

Thank you for the patch.

On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> 
> It has a flexible configuration of MIPI DSI signal input and
> produce RGB565, RGB666, RGB888 output format.
> 
> Add dt-bingings for it.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - updated to new dt-bindings style
> 
>  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
>  1 file changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> new file mode 100644
> index 000000000000..13764f13fe46
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> +
> +maintainers:
> +  - Jagan Teki <jagan@amarulasolutions.com>
> +
> +description: |
> +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> +
> +  It has a flexible configuration of MIPI DSI signal input and
> +  produce RGB565, RGB666, RGB888 output format.

How does one select between the output formats ? Should the output
connection option be described in the device tree ?

> +
> +properties:
> +  compatible:
> +    enum:
> +      - chipone,icn6211
> +
> +  reg:
> +    maxItems: 1
> +    description: virtual channel number of a DSI peripheral
> +
> +  reset-gpios:
> +    description: GPIO connected for the reset pin
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port for MIPI DSI input
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port for MIPI DPI output (panel or connector).
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +  - ports

How about regulators ?

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      bridge@0 {
> +        compatible = "chipone,icn6211";
> +        reg = <0>;
> +        reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          bridge_in: port@0 {

You can drop this label.

> +            reg = <0>;
> +
> +            bridge_out_dsi: endpoint {

This label should be bridge_in_dsi.

> +              remote-endpoint = <&dsi_out_bridge>;
> +            };
> +          };
> +
> +          bridge_out: port@1 {

You can drop this label too.

> +            reg = <1>;
> +
> +            bridge_out_panel: endpoint {
> +              remote-endpoint = <&panel_out_bridge>;
> +            };
> +          };
> +        };
> +      };
> +    };
Jagan Teki Feb. 24, 2021, 12:37 p.m. UTC | #4
Hi Laurent,

On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Jagan,
>
> Thank you for the patch.
>
> On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> >
> > It has a flexible configuration of MIPI DSI signal input and
> > produce RGB565, RGB666, RGB888 output format.
> >
> > Add dt-bingings for it.
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > Changes for v3:
> > - updated to new dt-bindings style
> >
> >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> >  1 file changed, 90 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > new file mode 100644
> > index 000000000000..13764f13fe46
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > @@ -0,0 +1,90 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > +
> > +maintainers:
> > +  - Jagan Teki <jagan@amarulasolutions.com>
> > +
> > +description: |
> > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > +
> > +  It has a flexible configuration of MIPI DSI signal input and
> > +  produce RGB565, RGB666, RGB888 output format.
>
> How does one select between the output formats ? Should the output
> connection option be described in the device tree ?

I think that is a good option to select output formats via dts. what
if it makes it a generic property like data-lanes? since it is common
across many other bridges.

>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - chipone,icn6211
> > +
> > +  reg:
> > +    maxItems: 1
> > +    description: virtual channel number of a DSI peripheral
> > +
> > +  reset-gpios:
> > +    description: GPIO connected for the reset pin
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Video port for MIPI DSI input
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Video port for MIPI DPI output (panel or connector).
> > +
> > +    required:
> > +      - port@0
> > +      - port@1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reset-gpios
> > +  - ports
>
> How about regulators ?

Will add it in the next version.

Jagan.
Laurent Pinchart Feb. 24, 2021, 1:13 p.m. UTC | #5
Hi Jagan,

On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > >
> > > It has a flexible configuration of MIPI DSI signal input and
> > > produce RGB565, RGB666, RGB888 output format.
> > >
> > > Add dt-bingings for it.
> > >
> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > ---
> > > Changes for v3:
> > > - updated to new dt-bindings style
> > >
> > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > >  1 file changed, 90 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > new file mode 100644
> > > index 000000000000..13764f13fe46
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > @@ -0,0 +1,90 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > > +
> > > +maintainers:
> > > +  - Jagan Teki <jagan@amarulasolutions.com>
> > > +
> > > +description: |
> > > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > > +
> > > +  It has a flexible configuration of MIPI DSI signal input and
> > > +  produce RGB565, RGB666, RGB888 output format.
> >
> > How does one select between the output formats ? Should the output
> > connection option be described in the device tree ?
> 
> I think that is a good option to select output formats via dts. what
> if it makes it a generic property like data-lanes? since it is common
> across many other bridges.

Describing the output connection in the device tree sounds like a good
idea indeed. The bus-width property could be used for this, maybe along
the lines of
https://lore.kernel.org/dri-devel/20201013020619.GG3942@pendragon.ideasonboard.com/.

If, for a given wiring of the output, different formats could be used,
then we would need to select them at runtime.

> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - chipone,icn6211
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +    description: virtual channel number of a DSI peripheral
> > > +
> > > +  reset-gpios:
> > > +    description: GPIO connected for the reset pin
> > > +
> > > +  ports:
> > > +    $ref: /schemas/graph.yaml#/properties/ports
> > > +
> > > +    properties:
> > > +      port@0:
> > > +        $ref: /schemas/graph.yaml#/properties/port
> > > +        description:
> > > +          Video port for MIPI DSI input
> > > +
> > > +      port@1:
> > > +        $ref: /schemas/graph.yaml#/properties/port
> > > +        description:
> > > +          Video port for MIPI DPI output (panel or connector).
> > > +
> > > +    required:
> > > +      - port@0
> > > +      - port@1
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - reset-gpios
> > > +  - ports
> >
> > How about regulators ?
> 
> Will add it in the next version.
Jagan Teki Feb. 24, 2021, 1:46 p.m. UTC | #6
Hi Laurent,

On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Jagan,
>
> On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> > On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > > >
> > > > It has a flexible configuration of MIPI DSI signal input and
> > > > produce RGB565, RGB666, RGB888 output format.
> > > >
> > > > Add dt-bingings for it.
> > > >
> > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > > ---
> > > > Changes for v3:
> > > > - updated to new dt-bindings style
> > > >
> > > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > > >  1 file changed, 90 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > new file mode 100644
> > > > index 000000000000..13764f13fe46
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > @@ -0,0 +1,90 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > > > +
> > > > +maintainers:
> > > > +  - Jagan Teki <jagan@amarulasolutions.com>
> > > > +
> > > > +description: |
> > > > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > > > +
> > > > +  It has a flexible configuration of MIPI DSI signal input and
> > > > +  produce RGB565, RGB666, RGB888 output format.
> > >
> > > How does one select between the output formats ? Should the output
> > > connection option be described in the device tree ?
> >
> > I think that is a good option to select output formats via dts. what
> > if it makes it a generic property like data-lanes? since it is common
> > across many other bridges.
>
> Describing the output connection in the device tree sounds like a good
> idea indeed. The bus-width property could be used for this, maybe along
> the lines of
> https://lore.kernel.org/dri-devel/20201013020619.GG3942@pendragon.ideasonboard.com/.

I think this bridge is doing, what we discussed? am I correct?
Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml

>
> If, for a given wiring of the output, different formats could be used,
> then we would need to select them at runtime.

That means the opposite of what mipi_dsi_pixel_format_to_bpp is doing
right? like given bpp we need to select format.

Jagan.
Jagan Teki March 3, 2021, 2:38 p.m. UTC | #7
On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Jagan,
>
> On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> > On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > > >
> > > > It has a flexible configuration of MIPI DSI signal input and
> > > > produce RGB565, RGB666, RGB888 output format.
> > > >
> > > > Add dt-bingings for it.
> > > >
> > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > > ---
> > > > Changes for v3:
> > > > - updated to new dt-bindings style
> > > >
> > > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > > >  1 file changed, 90 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > new file mode 100644
> > > > index 000000000000..13764f13fe46
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > @@ -0,0 +1,90 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > > > +
> > > > +maintainers:
> > > > +  - Jagan Teki <jagan@amarulasolutions.com>
> > > > +
> > > > +description: |
> > > > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > > > +
> > > > +  It has a flexible configuration of MIPI DSI signal input and
> > > > +  produce RGB565, RGB666, RGB888 output format.
> > >
> > > How does one select between the output formats ? Should the output
> > > connection option be described in the device tree ?
> >
> > I think that is a good option to select output formats via dts. what
> > if it makes it a generic property like data-lanes? since it is common
> > across many other bridges.
>
> Describing the output connection in the device tree sounds like a good
> idea indeed. The bus-width property could be used for this, maybe along
> the lines of
> https://lore.kernel.org/dri-devel/20201013020619.GG3942@pendragon.ideasonboard.com/.

I have seen an issue by passing bus-width where the same bus-with 24
can use by RGB888 and RGB666 according to
mipi_dsi_pixel_format_to_bpp. Having a default RGB888 format now and
update it when it supports properly, can be a good Idea I thought of.
Let me know if you have any comments?

Jagan.
Laurent Pinchart March 3, 2021, 10:59 p.m. UTC | #8
Hi Jagan,

On Wed, Mar 03, 2021 at 08:08:35PM +0530, Jagan Teki wrote:
> On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart wrote:
> > On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> > > On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > > > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > > > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > > > >
> > > > > It has a flexible configuration of MIPI DSI signal input and
> > > > > produce RGB565, RGB666, RGB888 output format.
> > > > >
> > > > > Add dt-bingings for it.
> > > > >
> > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > > > ---
> > > > > Changes for v3:
> > > > > - updated to new dt-bindings style
> > > > >
> > > > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > > > >  1 file changed, 90 insertions(+)
> > > > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > > new file mode 100644
> > > > > index 000000000000..13764f13fe46
> > > > > --- /dev/null
> > > > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > > @@ -0,0 +1,90 @@
> > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > > +%YAML 1.2
> > > > > +---
> > > > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > > +
> > > > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > > > > +
> > > > > +maintainers:
> > > > > +  - Jagan Teki <jagan@amarulasolutions.com>
> > > > > +
> > > > > +description: |
> > > > > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > > > > +
> > > > > +  It has a flexible configuration of MIPI DSI signal input and
> > > > > +  produce RGB565, RGB666, RGB888 output format.
> > > >
> > > > How does one select between the output formats ? Should the output
> > > > connection option be described in the device tree ?
> > >
> > > I think that is a good option to select output formats via dts. what
> > > if it makes it a generic property like data-lanes? since it is common
> > > across many other bridges.
> >
> > Describing the output connection in the device tree sounds like a good
> > idea indeed. The bus-width property could be used for this, maybe along
> > the lines of
> > https://lore.kernel.org/dri-devel/20201013020619.GG3942@pendragon.ideasonboard.com/.
> 
> I have seen an issue by passing bus-width where the same bus-with 24
> can use by RGB888 and RGB666 according to
> mipi_dsi_pixel_format_to_bpp. Having a default RGB888 format now and
> update it when it supports properly, can be a good Idea I thought of.
> Let me know if you have any comments?

I'm fine with hardcoding a default for now. If a given bus wiring (which
is described in DT by bus-width) can transport different formats, that's
something that should be configured dynamically, either by querying what
format a sink (such as a panel) requires, or if both the source and the
sink can support different formats, possibly by involving userspace in
the selection.
Jagan Teki March 4, 2021, 9:10 a.m. UTC | #9
Hi Laurent,

On Thu, Mar 4, 2021 at 4:29 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Jagan,
>
> On Wed, Mar 03, 2021 at 08:08:35PM +0530, Jagan Teki wrote:
> > On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart wrote:
> > > On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> > > > On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > > > > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > > > > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > > > > >
> > > > > > It has a flexible configuration of MIPI DSI signal input and
> > > > > > produce RGB565, RGB666, RGB888 output format.
> > > > > >
> > > > > > Add dt-bingings for it.
> > > > > >
> > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > > > > ---
> > > > > > Changes for v3:
> > > > > > - updated to new dt-bindings style
> > > > > >
> > > > > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > > > > >  1 file changed, 90 insertions(+)
> > > > > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > > >
> > > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > > > new file mode 100644
> > > > > > index 000000000000..13764f13fe46
> > > > > > --- /dev/null
> > > > > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > > > @@ -0,0 +1,90 @@
> > > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > > > +%YAML 1.2
> > > > > > +---
> > > > > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > > > +
> > > > > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > > > > > +
> > > > > > +maintainers:
> > > > > > +  - Jagan Teki <jagan@amarulasolutions.com>
> > > > > > +
> > > > > > +description: |
> > > > > > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > > > > > +
> > > > > > +  It has a flexible configuration of MIPI DSI signal input and
> > > > > > +  produce RGB565, RGB666, RGB888 output format.
> > > > >
> > > > > How does one select between the output formats ? Should the output
> > > > > connection option be described in the device tree ?
> > > >
> > > > I think that is a good option to select output formats via dts. what
> > > > if it makes it a generic property like data-lanes? since it is common
> > > > across many other bridges.
> > >
> > > Describing the output connection in the device tree sounds like a good
> > > idea indeed. The bus-width property could be used for this, maybe along
> > > the lines of
> > > https://lore.kernel.org/dri-devel/20201013020619.GG3942@pendragon.ideasonboard.com/.
> >
> > I have seen an issue by passing bus-width where the same bus-with 24
> > can use by RGB888 and RGB666 according to
> > mipi_dsi_pixel_format_to_bpp. Having a default RGB888 format now and
> > update it when it supports properly, can be a good Idea I thought of.
> > Let me know if you have any comments?
>
> I'm fine with hardcoding a default for now. If a given bus wiring (which
> is described in DT by bus-width) can transport different formats, that's
> something that should be configured dynamically, either by querying what
> format a sink (such as a panel) requires, or if both the source and the
> sink can support different formats, possibly by involving userspace in
> the selection.

Not sure how we can get userspace involvement in DRM here, but if
source and sink can have different formats then having precedence to
the source would be a good option as it handles low-level
configuration for formats.

Look like it is worth trying-feature. Maybe we can come up with some
RFC and have a discussion.

Jagan.
Rob Herring (Arm) March 5, 2021, 9:40 p.m. UTC | #10
On Mon, Feb 15, 2021 at 05:38:16PM +0530, Jagan Teki wrote:
> On Mon, Feb 15, 2021 at 5:28 PM Robert Foss <robert.foss@linaro.org> wrote:
> >
> > Hey Jagan,
> >
> > Thanks for submitting this.
> >
> > checkpatch.pl threw some typ-o warnings, and I listed them below. I
> > think either spelling is correct, but 'spelling.txt' does list this as
> > a typ-o explicitly, so I would suggest conforming to that just to
> > silence the checkpatch warning.
> >
> > This patch also passes 'dt_binding_check' and 'dtbs_check', but I
> > think I'd like to defer to Rob Herring for an actual r-b.
> >
> > On Sun, 14 Feb 2021 at 18:55, Jagan Teki <jagan@amarulasolutions.com> wrote:
> > >
> > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > >
> > > It has a flexible configuration of MIPI DSI signal input and
> > > produce RGB565, RGB666, RGB888 output format.
> > >
> > > Add dt-bingings for it.
> > >
> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > ---
> > > Changes for v3:
> > > - updated to new dt-bindings style
> > >
> > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > >  1 file changed, 90 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > new file mode 100644
> > > index 000000000000..13764f13fe46
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > @@ -0,0 +1,90 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> >
> > $ scripts/checkpatch.pl --git HEAD~0
> > WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?
> 
> Thanks for pointing it.
> 
> I was aware of it before sending it and need to understand whether we
> need to use vendor naming conversion or not. Chipone call these
> devices are Convertor [1], So I have used the vendor notation for
> better understanding.
> 
> Any comments are this would be welcome?

Fix their spelling. If you need to propagate spelling/grammar errors, 
there's a defined way to do so.

Rob

> 
> [1] http://en.chiponeic.com/content/details45_123.html
> 
> Jagan.
Rob Herring (Arm) March 5, 2021, 9:40 p.m. UTC | #11
On Sun, 14 Feb 2021 23:22:10 +0530, Jagan Teki wrote:
> ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> 
> It has a flexible configuration of MIPI DSI signal input and
> produce RGB565, RGB666, RGB888 output format.
> 
> Add dt-bingings for it.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - updated to new dt-bindings style
> 
>  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
>  1 file changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
new file mode 100644
index 000000000000..13764f13fe46
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -0,0 +1,90 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
+
+  It has a flexible configuration of MIPI DSI signal input and
+  produce RGB565, RGB666, RGB888 output format.
+
+properties:
+  compatible:
+    enum:
+      - chipone,icn6211
+
+  reg:
+    maxItems: 1
+    description: virtual channel number of a DSI peripheral
+
+  reset-gpios:
+    description: GPIO connected for the reset pin
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DSI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DPI output (panel or connector).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@0 {
+        compatible = "chipone,icn6211";
+        reg = <0>;
+        reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          bridge_in: port@0 {
+            reg = <0>;
+
+            bridge_out_dsi: endpoint {
+              remote-endpoint = <&dsi_out_bridge>;
+            };
+          };
+
+          bridge_out: port@1 {
+            reg = <1>;
+
+            bridge_out_panel: endpoint {
+              remote-endpoint = <&panel_out_bridge>;
+            };
+          };
+        };
+      };
+    };