| Message ID | 20210324185128.63971-1-krebbel@linux.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3] linux-user/s390x: Use the guest pointer for the sigreturn stub | expand |
Le 24/03/2021 à 19:51, Andreas Krebbel a écrit : > When setting up the pointer for the sigreturn stub in the return > address register (r14) we currently use the host frame address instead > of the guest frame address. > > Note: This only caused problems if Qemu has been built with > --disable-pie (as it is in distros nowadays). Otherwise guest_base > defaults to 0 hiding the actual problem. > > Signed-off-by: Andreas Krebbel <krebbel@linux.ibm.com> > --- > linux-user/s390x/signal.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/linux-user/s390x/signal.c b/linux-user/s390x/signal.c > index ecfa2a14a9..7107c5fb53 100644 > --- a/linux-user/s390x/signal.c > +++ b/linux-user/s390x/signal.c > @@ -211,9 +211,10 @@ void setup_rt_frame(int sig, struct target_sigaction *ka, > /* Set up to return from userspace. If provided, use a stub > already in userspace. */ > if (ka->sa_flags & TARGET_SA_RESTORER) { > - env->regs[14] = (unsigned long) ka->sa_restorer | PSW_ADDR_AMODE; > + env->regs[14] = ka->sa_restorer | PSW_ADDR_AMODE; > } else { > - env->regs[14] = (unsigned long) frame->retcode | PSW_ADDR_AMODE; > + env->regs[14] = (frame_addr + offsetof(typeof(*frame), retcode)) > + | PSW_ADDR_AMODE; > __put_user(S390_SYSCALL_OPCODE | TARGET_NR_rt_sigreturn, > (uint16_t *)(frame->retcode)); > } > Reviewed-by: Laurent Vivier <laurent@vivier.eu>
On 3/24/21 12:51 PM, Andreas Krebbel wrote: > When setting up the pointer for the sigreturn stub in the return > address register (r14) we currently use the host frame address instead > of the guest frame address. > > Note: This only caused problems if Qemu has been built with > --disable-pie (as it is in distros nowadays). Otherwise guest_base > defaults to 0 hiding the actual problem. > > Signed-off-by: Andreas Krebbel<krebbel@linux.ibm.com> > --- > linux-user/s390x/signal.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> r~
Le 24/03/2021 à 19:51, Andreas Krebbel a écrit : > When setting up the pointer for the sigreturn stub in the return > address register (r14) we currently use the host frame address instead > of the guest frame address. > > Note: This only caused problems if Qemu has been built with > --disable-pie (as it is in distros nowadays). Otherwise guest_base > defaults to 0 hiding the actual problem. > > Signed-off-by: Andreas Krebbel <krebbel@linux.ibm.com> > --- > linux-user/s390x/signal.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/linux-user/s390x/signal.c b/linux-user/s390x/signal.c > index ecfa2a14a9..7107c5fb53 100644 > --- a/linux-user/s390x/signal.c > +++ b/linux-user/s390x/signal.c > @@ -211,9 +211,10 @@ void setup_rt_frame(int sig, struct target_sigaction *ka, > /* Set up to return from userspace. If provided, use a stub > already in userspace. */ > if (ka->sa_flags & TARGET_SA_RESTORER) { > - env->regs[14] = (unsigned long) ka->sa_restorer | PSW_ADDR_AMODE; > + env->regs[14] = ka->sa_restorer | PSW_ADDR_AMODE; > } else { > - env->regs[14] = (unsigned long) frame->retcode | PSW_ADDR_AMODE; > + env->regs[14] = (frame_addr + offsetof(typeof(*frame), retcode)) > + | PSW_ADDR_AMODE; > __put_user(S390_SYSCALL_OPCODE | TARGET_NR_rt_sigreturn, > (uint16_t *)(frame->retcode)); > } > Applied to my linux-user-for-6.0 branch Thanks, Laurent
On 3/25/21 8:55 PM, Laurent Vivier wrote: > Le 24/03/2021 à 19:51, Andreas Krebbel a écrit : >> When setting up the pointer for the sigreturn stub in the return >> address register (r14) we currently use the host frame address instead >> of the guest frame address. >> >> Note: This only caused problems if Qemu has been built with >> --disable-pie (as it is in distros nowadays). Otherwise guest_base >> defaults to 0 hiding the actual problem. >> >> Signed-off-by: Andreas Krebbel <krebbel@linux.ibm.com> >> --- >> linux-user/s390x/signal.c | 5 +++-- >> 1 file changed, 3 insertions(+), 2 deletions(-) >> >> diff --git a/linux-user/s390x/signal.c b/linux-user/s390x/signal.c >> index ecfa2a14a9..7107c5fb53 100644 >> --- a/linux-user/s390x/signal.c >> +++ b/linux-user/s390x/signal.c >> @@ -211,9 +211,10 @@ void setup_rt_frame(int sig, struct target_sigaction *ka, >> /* Set up to return from userspace. If provided, use a stub >> already in userspace. */ >> if (ka->sa_flags & TARGET_SA_RESTORER) { >> - env->regs[14] = (unsigned long) ka->sa_restorer | PSW_ADDR_AMODE; >> + env->regs[14] = ka->sa_restorer | PSW_ADDR_AMODE; >> } else { >> - env->regs[14] = (unsigned long) frame->retcode | PSW_ADDR_AMODE; >> + env->regs[14] = (frame_addr + offsetof(typeof(*frame), retcode)) >> + | PSW_ADDR_AMODE; >> __put_user(S390_SYSCALL_OPCODE | TARGET_NR_rt_sigreturn, >> (uint16_t *)(frame->retcode)); >> } >> > > Applied to my linux-user-for-6.0 branch Thanks! Since this fixes a problem which prevents important applications (e.g. golang) to run properly under Qemu for IBM Z right now I think it qualifies for stable branch. The patch applies cleanly on 5.0 branch. Testsuite is clean and I've verfified that it fixes the actual problem there as well. Please consider inclusion into stable branch. Andreas > > Thanks, > Laurent >
diff --git a/linux-user/s390x/signal.c b/linux-user/s390x/signal.c index ecfa2a14a9..7107c5fb53 100644 --- a/linux-user/s390x/signal.c +++ b/linux-user/s390x/signal.c @@ -211,9 +211,10 @@ void setup_rt_frame(int sig, struct target_sigaction *ka, /* Set up to return from userspace. If provided, use a stub already in userspace. */ if (ka->sa_flags & TARGET_SA_RESTORER) { - env->regs[14] = (unsigned long) ka->sa_restorer | PSW_ADDR_AMODE; + env->regs[14] = ka->sa_restorer | PSW_ADDR_AMODE; } else { - env->regs[14] = (unsigned long) frame->retcode | PSW_ADDR_AMODE; + env->regs[14] = (frame_addr + offsetof(typeof(*frame), retcode)) + | PSW_ADDR_AMODE; __put_user(S390_SYSCALL_OPCODE | TARGET_NR_rt_sigreturn, (uint16_t *)(frame->retcode)); }
When setting up the pointer for the sigreturn stub in the return address register (r14) we currently use the host frame address instead of the guest frame address. Note: This only caused problems if Qemu has been built with --disable-pie (as it is in distros nowadays). Otherwise guest_base defaults to 0 hiding the actual problem. Signed-off-by: Andreas Krebbel <krebbel@linux.ibm.com> --- linux-user/s390x/signal.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)