diff mbox series

[16/16] dt-bindings: phy: cdns,dphy: add power-domains property

Message ID 20210330173348.30135-17-p.yadav@ti.com (mailing list archive)
State Not Applicable
Headers show
Series CSI2RX support on J721E | expand

Commit Message

Pratyush Yadav March 30, 2021, 5:33 p.m. UTC
This property is needed on TI platforms to enable the PD of the DPHY
before it can be used.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
---
 Documentation/devicetree/bindings/phy/cdns,dphy.yaml | 3 +++
 1 file changed, 3 insertions(+)

Comments

Laurent Pinchart April 2, 2021, 10:35 a.m. UTC | #1
Hi Pratyush,

Thank you for the patch.

On Tue, Mar 30, 2021 at 11:03:48PM +0530, Pratyush Yadav wrote:
> This property is needed on TI platforms to enable the PD of the DPHY
> before it can be used.
> 
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
> ---
>  Documentation/devicetree/bindings/phy/cdns,dphy.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
> index 0807ba68284d..ddcd4de0aef6 100644
> --- a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
> +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
> @@ -30,6 +30,9 @@ properties:
>    "#phy-cells":
>      const: 0
>  
> +  power-domains:
> +    maxItems: 1
> +

Would it be useful to add power-domains to the example ?

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

>  required:
>    - compatible
>    - reg
Pratyush Yadav April 6, 2021, 6:23 p.m. UTC | #2
On 02/04/21 01:35PM, Laurent Pinchart wrote:
> Hi Pratyush,
> 
> Thank you for the patch.
> 
> On Tue, Mar 30, 2021 at 11:03:48PM +0530, Pratyush Yadav wrote:
> > This property is needed on TI platforms to enable the PD of the DPHY
> > before it can be used.
> > 
> > Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
> > ---
> >  Documentation/devicetree/bindings/phy/cdns,dphy.yaml | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
> > index 0807ba68284d..ddcd4de0aef6 100644
> > --- a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
> > @@ -30,6 +30,9 @@ properties:
> >    "#phy-cells":
> >      const: 0
> >  
> > +  power-domains:
> > +    maxItems: 1
> > +
> 
> Would it be useful to add power-domains to the example ?

Ok. Will add it in v2.

> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Thanks.

> 
> >  required:
> >    - compatible
> >    - reg
> 
> -- 
> Regards,
> 
> Laurent Pinchart
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
index 0807ba68284d..ddcd4de0aef6 100644
--- a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
@@ -30,6 +30,9 @@  properties:
   "#phy-cells":
     const: 0
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg