Message ID | c479de5b3f235c2f7d5faea9e7e08e6fccb135df.1619785375.git.geert+renesas@glider.be (mailing list archive) |
---|---|
State | Accepted |
Delegated to: | Geert Uytterhoeven |
Headers | show |
Series | pinctrl: renesas: Add more bias pinconf support | expand |
Hi Geert, Thanks for your work. On 2021-04-30 14:31:00 +0200, Geert Uytterhoeven wrote: > R-Car Gen3 Hardware Manual Errata for Rev. 0.52 of Nov 30, 2016, added > the configuration bit for bias pull-down control for the PRESET# pin on > R-Car M3-W. Add driver support for controlling pull-down on this pin. > > Fixes: 2d40bd24274d2577 ("pinctrl: sh-pfc: r8a7796: Add bias pinconf support") > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > --- > drivers/pinctrl/renesas/pfc-r8a7796.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/pinctrl/renesas/pfc-r8a7796.c b/drivers/pinctrl/renesas/pfc-r8a7796.c > index 44e9d2eea484ad5d..bbb1b436ded3123f 100644 > --- a/drivers/pinctrl/renesas/pfc-r8a7796.c > +++ b/drivers/pinctrl/renesas/pfc-r8a7796.c > @@ -67,6 +67,7 @@ > PIN_NOGP_CFG(QSPI1_MOSI_IO0, "QSPI1_MOSI_IO0", fn, CFG_FLAGS), \ > PIN_NOGP_CFG(QSPI1_SPCLK, "QSPI1_SPCLK", fn, CFG_FLAGS), \ > PIN_NOGP_CFG(QSPI1_SSL, "QSPI1_SSL", fn, CFG_FLAGS), \ > + PIN_NOGP_CFG(PRESET_N, "PRESET#", fn, SH_PFC_PIN_CFG_PULL_DOWN),\ > PIN_NOGP_CFG(RPC_INT_N, "RPC_INT#", fn, CFG_FLAGS), \ > PIN_NOGP_CFG(RPC_RESET_N, "RPC_RESET#", fn, CFG_FLAGS), \ > PIN_NOGP_CFG(RPC_WP_N, "RPC_WP#", fn, CFG_FLAGS), \ > @@ -6218,7 +6219,7 @@ static const struct pinmux_bias_reg pinmux_bias_regs[] = { > [ 4] = RCAR_GP_PIN(6, 29), /* USB30_OVC */ > [ 5] = RCAR_GP_PIN(6, 30), /* GP6_30 */ > [ 6] = RCAR_GP_PIN(6, 31), /* GP6_31 */ > - [ 7] = SH_PFC_PIN_NONE, > + [ 7] = PIN_PRESET_N, /* PRESET# */ > [ 8] = SH_PFC_PIN_NONE, > [ 9] = SH_PFC_PIN_NONE, > [10] = SH_PFC_PIN_NONE, > -- > 2.25.1 >
diff --git a/drivers/pinctrl/renesas/pfc-r8a7796.c b/drivers/pinctrl/renesas/pfc-r8a7796.c index 44e9d2eea484ad5d..bbb1b436ded3123f 100644 --- a/drivers/pinctrl/renesas/pfc-r8a7796.c +++ b/drivers/pinctrl/renesas/pfc-r8a7796.c @@ -67,6 +67,7 @@ PIN_NOGP_CFG(QSPI1_MOSI_IO0, "QSPI1_MOSI_IO0", fn, CFG_FLAGS), \ PIN_NOGP_CFG(QSPI1_SPCLK, "QSPI1_SPCLK", fn, CFG_FLAGS), \ PIN_NOGP_CFG(QSPI1_SSL, "QSPI1_SSL", fn, CFG_FLAGS), \ + PIN_NOGP_CFG(PRESET_N, "PRESET#", fn, SH_PFC_PIN_CFG_PULL_DOWN),\ PIN_NOGP_CFG(RPC_INT_N, "RPC_INT#", fn, CFG_FLAGS), \ PIN_NOGP_CFG(RPC_RESET_N, "RPC_RESET#", fn, CFG_FLAGS), \ PIN_NOGP_CFG(RPC_WP_N, "RPC_WP#", fn, CFG_FLAGS), \ @@ -6218,7 +6219,7 @@ static const struct pinmux_bias_reg pinmux_bias_regs[] = { [ 4] = RCAR_GP_PIN(6, 29), /* USB30_OVC */ [ 5] = RCAR_GP_PIN(6, 30), /* GP6_30 */ [ 6] = RCAR_GP_PIN(6, 31), /* GP6_31 */ - [ 7] = SH_PFC_PIN_NONE, + [ 7] = PIN_PRESET_N, /* PRESET# */ [ 8] = SH_PFC_PIN_NONE, [ 9] = SH_PFC_PIN_NONE, [10] = SH_PFC_PIN_NONE,
R-Car Gen3 Hardware Manual Errata for Rev. 0.52 of Nov 30, 2016, added the configuration bit for bias pull-down control for the PRESET# pin on R-Car M3-W. Add driver support for controlling pull-down on this pin. Fixes: 2d40bd24274d2577 ("pinctrl: sh-pfc: r8a7796: Add bias pinconf support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- drivers/pinctrl/renesas/pfc-r8a7796.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)