diff mbox series

arm64: dts: rockchip: fix regulator-gpio states array

Message ID 20210510215840.16270-1-jbx6244@gmail.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: rockchip: fix regulator-gpio states array | expand

Commit Message

Johan Jonker May 10, 2021, 9:58 p.m. UTC
A test with the command below gives this error:

/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml:
sdmmcio-regulator: states:0:
[1800000, 1, 3300000, 0] is too long

dtbs_check expects regulator-gpio states in a format
of 2 per item, so fix them all.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
regulator/gpio-regulator.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts       | 4 ++--
 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts   | 4 ++--
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts       | 4 ++--
 arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 2 +-
 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi         | 4 ++--
 5 files changed, 9 insertions(+), 9 deletions(-)

Comments

Heiko Stuebner May 14, 2021, 12:20 p.m. UTC | #1
On Mon, 10 May 2021 23:58:40 +0200, Johan Jonker wrote:
> A test with the command below gives this error:
> 
> /arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml:
> sdmmcio-regulator: states:0:
> [1800000, 1, 3300000, 0] is too long
> 
> dtbs_check expects regulator-gpio states in a format
> of 2 per item, so fix them all.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: rockchip: fix regulator-gpio states array
      commit: b82f8e2992534aab0fa762a37376be30df263701

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index 7a96be10e..bce6f8b7d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -78,8 +78,8 @@ 
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x0
-			  3300000 0x1>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
 		vin-supply = <&vcc5v0_sys>;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index f454ecf41..0d7326a24 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -77,8 +77,8 @@ 
 		regulator-settling-time-us = <5000>;
 		regulator-type = "voltage";
 		startup-delay-us = <2000>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		vin-supply = <&vcc_io_33>;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 19959bfba..7d9481962 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -45,8 +45,8 @@ 
 	vcc_sdio: sdmmcio-regulator {
 		compatible = "regulator-gpio";
 		gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		regulator-name = "vcc_sdio";
 		regulator-type = "voltage";
 		regulator-min-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index beee5fbb3..5d7a9d96d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -245,7 +245,7 @@  pp1800_pcie: &pp1800_s0 {
 };
 
 &ppvar_sd_card_io {
-	states = <1800000 0x0 3300000 0x1>;
+	states = <1800000 0x0>, <3300000 0x1>;
 	regulator-max-microvolt = <3300000>;
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 32dcaf210..765b24a2b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -247,8 +247,8 @@ 
 		enable-active-high;
 		enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3000000 0x0>;
+		states = <1800000 0x1>,
+			 <3000000 0x0>;
 
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3000000>;