diff mbox series

[3/4] drm/msm/dpu: Add SC8180x to hw catalog

Message ID 20210511041852.592295-4-bjorn.andersson@linaro.org (mailing list archive)
State New, archived
Headers show
Series drm/msm/dpu: Qualcomm SC8180x MDSS/DPU support | expand

Commit Message

Bjorn Andersson May 11, 2021, 4:18 a.m. UTC
From: Rob Clark <robdclark@chromium.org>

Add SC8180x to the hardware catalog, for initial support for the
platform. Due to limitations in the DP driver only one of the four DP
interfaces is left enabled.

The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
is flagged appropriately to ensure widebus is disabled - for now.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 .../devicetree/bindings/display/msm/dpu.txt   |   4 +-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 121 ++++++++++++++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   3 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
 drivers/gpu/drm/msm/msm_drv.c                 |   1 +
 5 files changed, 128 insertions(+), 2 deletions(-)

Comments

Dmitry Baryshkov May 12, 2021, 10:58 p.m. UTC | #1
On Tue, 11 May 2021 at 07:19, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> From: Rob Clark <robdclark@chromium.org>
>
> Add SC8180x to the hardware catalog, for initial support for the
> platform. Due to limitations in the DP driver only one of the four DP
> interfaces is left enabled.
>
> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
> the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
> is flagged appropriately to ensure widebus is disabled - for now.
>
> Signed-off-by: Rob Clark <robdclark@chromium.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  .../devicetree/bindings/display/msm/dpu.txt   |   4 +-
>  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 121 ++++++++++++++++++
>  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   3 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
>  drivers/gpu/drm/msm/msm_drv.c                 |   1 +
>  5 files changed, 128 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index 586e6eac5b08..b98258374a60 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
>
>  MDSS:
>  Required properties:
> -- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
> +- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sc8180x-mdss"
>  - reg: physical base address and length of controller's registers.
>  - reg-names: register region names. The following region is required:
>    * "mdss"
> @@ -41,7 +41,7 @@ Optional properties:
>
>  MDP:
>  Required properties:
> -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
> +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sc8180x-dpu"
>  - reg: physical base address and length of controller's registers.
>  - reg-names : register region names. The following region is required:
>    * "mdp"
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index b569030a0847..81c429ce94a9 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -56,6 +56,10 @@
>
>  #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
>
> +#define INTF_SC8180X_MASK BIT(DPU_INTF_INPUT_CTRL) | \
> +                         BIT(DPU_INTF_TE) | \
> +                         BIT(DPU_INTF_WIDEBUS)
> +
>  #define INTR_SC7180_MASK \
>         (BIT(DPU_IRQ_TYPE_PING_PONG_RD_PTR) |\
>         BIT(DPU_IRQ_TYPE_PING_PONG_WR_PTR) |\
> @@ -197,6 +201,22 @@ static const struct dpu_caps sm8150_dpu_caps = {
>         .max_vdeci_exp = MAX_VERT_DECIMATION,
>  };
>
> +static const struct dpu_caps sc8180_dpu_caps = {
> +       .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> +       .max_mixer_blendstages = 0xb,
> +       .qseed_type = DPU_SSPP_SCALER_QSEED3,

Is it qseed3 or qseed3lite?

> +       .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> +       .ubwc_version = DPU_HW_UBWC_VER_30,
> +       .has_src_split = true,
> +       .has_dim_layer = true,
> +       .has_idle_pc = true,
> +       .has_3d_merge = false,   /* I think? */

Hmm. Are you sure? Judging from two DSI interfaces you might have merge3d.

> +       .max_linewidth = 4096,
> +       .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> +       .max_hdeci_exp = MAX_HORZ_DECIMATION,
> +       .max_vdeci_exp = MAX_VERT_DECIMATION,
> +};
> +
>  static const struct dpu_caps sm8250_dpu_caps = {
>         .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
>         .max_mixer_blendstages = 0xb,
> @@ -265,6 +285,35 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = {
>         },
>  };
>
> +static const struct dpu_mdp_cfg sc8180_mdp[] = {
> +       {
> +       .name = "top_0", .id = MDP_TOP,
> +       // TODO check len
> +       .base = 0x0, .len = 0x45C,
> +       .features = 0,
> +       .highest_bank_bit = 0x3,
> +       .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> +                       .reg_off = 0x2AC, .bit_off = 0},
> +       .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
> +                       .reg_off = 0x2B4, .bit_off = 0},
> +       .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
> +                       .reg_off = 0x2BC, .bit_off = 0},
> +       .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
> +                       .reg_off = 0x2C4, .bit_off = 0},
> +       .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> +                       .reg_off = 0x2AC, .bit_off = 8},
> +       .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> +                       .reg_off = 0x2B4, .bit_off = 8},
> +       .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> +                       .reg_off = 0x2BC, .bit_off = 8},
> +       .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> +                       .reg_off = 0x2C4, .bit_off = 8},
> +// TODO ???
> +//     .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
> +//                     .reg_off = 0x2BC, .bit_off = 20},
> +       },
> +};
> +
>  static const struct dpu_mdp_cfg sm8250_mdp[] = {
>         {
>         .name = "top_0", .id = MDP_TOP,
> @@ -789,6 +838,15 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
>         INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK),
>  };
>
> +static const struct dpu_intf_cfg sc8180x_intf[] = {
> +//     INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> +       INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC8180X_MASK),
> +       INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC8180X_MASK),
> +//     INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SC8180X_MASK),
> +//     INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, 2, 24, INTF_SC8180X_MASK),
> +       INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, 0, 24, INTF_SC8180X_MASK),

Hmm. I think this should be INTF_EDP (or the _ctrl_id should be 1).

> +};
> +
>  /*************************************************************
>   * VBIF sub blocks config
>   *************************************************************/
> @@ -859,6 +917,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
>         {.fl = 0, .lut = 0x0011222222223357 },
>  };
>
> +static const struct dpu_qos_lut_entry sc8180_qos_linear[] = {
> +       {.fl = 4, .lut = 0x0000000000000357 },
> +};
> +
>  static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
>         {.fl = 10, .lut = 0x344556677},
>         {.fl = 11, .lut = 0x3344556677},
> @@ -872,6 +934,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = {
>         {.fl = 0, .lut = 0x0011223344556677},
>  };
>
> +static const struct dpu_qos_lut_entry sc8180_qos_macrotile[] = {
> +       {.fl = 10, .lut = 0x0000000344556677},
> +};
> +
>  static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = {
>         {.fl = 0, .lut = 0x0},
>  };
> @@ -976,6 +1042,31 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
>         .bw_inefficiency_factor = 120,
>  };
>
> +static const struct dpu_perf_cfg sc8180_perf_data = {
> +       .max_bw_low = 9600000,
> +       .max_bw_high = 9600000,
> +       .min_core_ib = 2400000,
> +       .min_llcc_ib = 800000,
> +       .min_dram_ib = 800000,
> +       .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0},
> +       .qos_lut_tbl = {
> +               {.nentry = ARRAY_SIZE(sc8180_qos_linear),
> +               .entries = sc8180_qos_linear
> +               },
> +               {.nentry = ARRAY_SIZE(sc8180_qos_macrotile),
> +               .entries = sc8180_qos_macrotile
> +               },
> +               {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> +               .entries = sc7180_qos_nrt
> +               },
> +               /* TODO: macrotile-qseed is different from macrotile */
> +       },
> +       .cdp_cfg = {
> +               {.rd_enable = 1, .wr_enable = 1},
> +               {.rd_enable = 1, .wr_enable = 0}
> +       },

Could you please add .clk_inefficiency_factor / .bw_inefficiency_factor

> +};
> +
>  static const struct dpu_perf_cfg sm8250_perf_data = {
>         .max_bw_low = 13700000,
>         .max_bw_high = 16600000,
> @@ -1129,6 +1220,35 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
>         };
>  }
>
> +/*
> + * sc8180_cfg_init(): populate sc8180 dpu sub-blocks reg offsets
> + * and instance counts.
> + */
> +static void sc8180_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> +{
> +       *dpu_cfg = (struct dpu_mdss_cfg){
> +               .caps = &sc8180_dpu_caps,
> +               .mdp_count = ARRAY_SIZE(sc8180_mdp),
> +               .mdp = sc8180_mdp,
> +               .ctl_count = ARRAY_SIZE(sm8150_ctl),
> +               .ctl = sm8150_ctl,
> +               .sspp_count = ARRAY_SIZE(sdm845_sspp),
> +               .sspp = sdm845_sspp,
> +               .mixer_count = ARRAY_SIZE(sm8150_lm),
> +               .mixer = sm8150_lm,
> +               .pingpong_count = ARRAY_SIZE(sm8150_pp),
> +               .pingpong = sm8150_pp,
> +               .intf_count = ARRAY_SIZE(sc8180x_intf),
> +               .intf = sc8180x_intf,
> +               .vbif_count = ARRAY_SIZE(sdm845_vbif),
> +               .vbif = sdm845_vbif,
> +               .reg_dma_count = 1,
> +               .dma_cfg = sm8150_regdma,
> +               .perf = sc8180_perf_data,
> +               .mdss_irqs = 0x3ff,
> +       };
> +}
> +
>  /*
>   * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets
>   * and instance counts.
> @@ -1191,6 +1311,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
>         { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
>         { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
>         { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
> +       { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180_cfg_init},
>         { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
>         { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
>         { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init},
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index c2f34a4f82d9..644e315df0fb 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -39,6 +39,7 @@
>  #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */
>  #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
>  #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
> +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */
>  #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
>  #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
>  #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
> @@ -287,6 +288,8 @@ enum dpu_qos_lut_usage {
>         DPU_QOS_LUT_USAGE_LINEAR,
>         DPU_QOS_LUT_USAGE_MACROTILE,
>         DPU_QOS_LUT_USAGE_NRT,
> +       DPU_QOS_LUT_USAGE_CWB,
> +       DPU_QOS_LUT_USAGE_MACROTILE_QSEED,
>         DPU_QOS_LUT_USAGE_MAX,
>  };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 8b01cb660381..7e8f0df2bd88 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1228,6 +1228,7 @@ static const struct of_device_id dpu_dt_match[] = {
>         { .compatible = "qcom,sdm845-dpu", },
>         { .compatible = "qcom,sc7180-dpu", },
>         { .compatible = "qcom,sc7280-dpu", },
> +       { .compatible = "qcom,sc8180x-dpu", },
>         { .compatible = "qcom,sm8150-dpu", },
>         { .compatible = "qcom,sm8250-dpu", },
>         {}
> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> index e1104d2454e2..b5bcbf5c2306 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -1342,6 +1342,7 @@ static const struct of_device_id dt_match[] = {
>         { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
>         { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
>         { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
> +       { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU },
>         { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
>         { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
>         {}
> --
> 2.29.2
>
Bjorn Andersson May 16, 2021, 4:25 a.m. UTC | #2
On Wed 12 May 17:58 CDT 2021, Dmitry Baryshkov wrote:

> On Tue, 11 May 2021 at 07:19, Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> >
> > From: Rob Clark <robdclark@chromium.org>
> >
> > Add SC8180x to the hardware catalog, for initial support for the
> > platform. Due to limitations in the DP driver only one of the four DP
> > interfaces is left enabled.
> >
> > The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
> > the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
> > is flagged appropriately to ensure widebus is disabled - for now.
> >
> > Signed-off-by: Rob Clark <robdclark@chromium.org>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> >  .../devicetree/bindings/display/msm/dpu.txt   |   4 +-
> >  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 121 ++++++++++++++++++
> >  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   3 +
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
> >  drivers/gpu/drm/msm/msm_drv.c                 |   1 +
> >  5 files changed, 128 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> > index 586e6eac5b08..b98258374a60 100644
> > --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> > +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> > @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
> >
> >  MDSS:
> >  Required properties:
> > -- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
> > +- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sc8180x-mdss"
> >  - reg: physical base address and length of controller's registers.
> >  - reg-names: register region names. The following region is required:
> >    * "mdss"
> > @@ -41,7 +41,7 @@ Optional properties:
> >
> >  MDP:
> >  Required properties:
> > -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
> > +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sc8180x-dpu"
> >  - reg: physical base address and length of controller's registers.
> >  - reg-names : register region names. The following region is required:
> >    * "mdp"
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > index b569030a0847..81c429ce94a9 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > @@ -56,6 +56,10 @@
> >
> >  #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
> >
> > +#define INTF_SC8180X_MASK BIT(DPU_INTF_INPUT_CTRL) | \
> > +                         BIT(DPU_INTF_TE) | \
> > +                         BIT(DPU_INTF_WIDEBUS)
> > +
> >  #define INTR_SC7180_MASK \
> >         (BIT(DPU_IRQ_TYPE_PING_PONG_RD_PTR) |\
> >         BIT(DPU_IRQ_TYPE_PING_PONG_WR_PTR) |\
> > @@ -197,6 +201,22 @@ static const struct dpu_caps sm8150_dpu_caps = {
> >         .max_vdeci_exp = MAX_VERT_DECIMATION,
> >  };
> >
> > +static const struct dpu_caps sc8180_dpu_caps = {
> > +       .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> > +       .max_mixer_blendstages = 0xb,
> > +       .qseed_type = DPU_SSPP_SCALER_QSEED3,
> 
> Is it qseed3 or qseed3lite?
> 
> > +       .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> > +       .ubwc_version = DPU_HW_UBWC_VER_30,
> > +       .has_src_split = true,
> > +       .has_dim_layer = true,
> > +       .has_idle_pc = true,
> > +       .has_3d_merge = false,   /* I think? */
> 
> Hmm. Are you sure? Judging from two DSI interfaces you might have merge3d.
> 
> > +       .max_linewidth = 4096,
> > +       .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> > +       .max_hdeci_exp = MAX_HORZ_DECIMATION,
> > +       .max_vdeci_exp = MAX_VERT_DECIMATION,
> > +};
> > +
> >  static const struct dpu_caps sm8250_dpu_caps = {
> >         .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> >         .max_mixer_blendstages = 0xb,
> > @@ -265,6 +285,35 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = {
> >         },
> >  };
> >
> > +static const struct dpu_mdp_cfg sc8180_mdp[] = {
> > +       {
> > +       .name = "top_0", .id = MDP_TOP,
> > +       // TODO check len
> > +       .base = 0x0, .len = 0x45C,
> > +       .features = 0,
> > +       .highest_bank_bit = 0x3,
> > +       .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> > +                       .reg_off = 0x2AC, .bit_off = 0},
> > +       .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
> > +                       .reg_off = 0x2B4, .bit_off = 0},
> > +       .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
> > +                       .reg_off = 0x2BC, .bit_off = 0},
> > +       .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
> > +                       .reg_off = 0x2C4, .bit_off = 0},
> > +       .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> > +                       .reg_off = 0x2AC, .bit_off = 8},
> > +       .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> > +                       .reg_off = 0x2B4, .bit_off = 8},
> > +       .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> > +                       .reg_off = 0x2BC, .bit_off = 8},
> > +       .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> > +                       .reg_off = 0x2C4, .bit_off = 8},
> > +// TODO ???
> > +//     .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
> > +//                     .reg_off = 0x2BC, .bit_off = 20},
> > +       },
> > +};
> > +
> >  static const struct dpu_mdp_cfg sm8250_mdp[] = {
> >         {
> >         .name = "top_0", .id = MDP_TOP,
> > @@ -789,6 +838,15 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
> >         INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK),
> >  };
> >
> > +static const struct dpu_intf_cfg sc8180x_intf[] = {
> > +//     INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> > +       INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC8180X_MASK),
> > +       INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC8180X_MASK),
> > +//     INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SC8180X_MASK),
> > +//     INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, 2, 24, INTF_SC8180X_MASK),
> > +       INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> 
> Hmm. I think this should be INTF_EDP (or the _ctrl_id should be 1).
> 

Right, INTF_5 is wired to the EDP controller. But that prevents it from
being paired with the dp controller. I will have to dig into the
matching further to figure out how to fix this.

Thanks for your feedback.

Regards,
Bjorn

> > +};
> > +
> >  /*************************************************************
> >   * VBIF sub blocks config
> >   *************************************************************/
> > @@ -859,6 +917,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
> >         {.fl = 0, .lut = 0x0011222222223357 },
> >  };
> >
> > +static const struct dpu_qos_lut_entry sc8180_qos_linear[] = {
> > +       {.fl = 4, .lut = 0x0000000000000357 },
> > +};
> > +
> >  static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
> >         {.fl = 10, .lut = 0x344556677},
> >         {.fl = 11, .lut = 0x3344556677},
> > @@ -872,6 +934,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = {
> >         {.fl = 0, .lut = 0x0011223344556677},
> >  };
> >
> > +static const struct dpu_qos_lut_entry sc8180_qos_macrotile[] = {
> > +       {.fl = 10, .lut = 0x0000000344556677},
> > +};
> > +
> >  static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = {
> >         {.fl = 0, .lut = 0x0},
> >  };
> > @@ -976,6 +1042,31 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
> >         .bw_inefficiency_factor = 120,
> >  };
> >
> > +static const struct dpu_perf_cfg sc8180_perf_data = {
> > +       .max_bw_low = 9600000,
> > +       .max_bw_high = 9600000,
> > +       .min_core_ib = 2400000,
> > +       .min_llcc_ib = 800000,
> > +       .min_dram_ib = 800000,
> > +       .danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0},
> > +       .qos_lut_tbl = {
> > +               {.nentry = ARRAY_SIZE(sc8180_qos_linear),
> > +               .entries = sc8180_qos_linear
> > +               },
> > +               {.nentry = ARRAY_SIZE(sc8180_qos_macrotile),
> > +               .entries = sc8180_qos_macrotile
> > +               },
> > +               {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> > +               .entries = sc7180_qos_nrt
> > +               },
> > +               /* TODO: macrotile-qseed is different from macrotile */
> > +       },
> > +       .cdp_cfg = {
> > +               {.rd_enable = 1, .wr_enable = 1},
> > +               {.rd_enable = 1, .wr_enable = 0}
> > +       },
> 
> Could you please add .clk_inefficiency_factor / .bw_inefficiency_factor
> 
> > +};
> > +
> >  static const struct dpu_perf_cfg sm8250_perf_data = {
> >         .max_bw_low = 13700000,
> >         .max_bw_high = 16600000,
> > @@ -1129,6 +1220,35 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> >         };
> >  }
> >
> > +/*
> > + * sc8180_cfg_init(): populate sc8180 dpu sub-blocks reg offsets
> > + * and instance counts.
> > + */
> > +static void sc8180_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> > +{
> > +       *dpu_cfg = (struct dpu_mdss_cfg){
> > +               .caps = &sc8180_dpu_caps,
> > +               .mdp_count = ARRAY_SIZE(sc8180_mdp),
> > +               .mdp = sc8180_mdp,
> > +               .ctl_count = ARRAY_SIZE(sm8150_ctl),
> > +               .ctl = sm8150_ctl,
> > +               .sspp_count = ARRAY_SIZE(sdm845_sspp),
> > +               .sspp = sdm845_sspp,
> > +               .mixer_count = ARRAY_SIZE(sm8150_lm),
> > +               .mixer = sm8150_lm,
> > +               .pingpong_count = ARRAY_SIZE(sm8150_pp),
> > +               .pingpong = sm8150_pp,
> > +               .intf_count = ARRAY_SIZE(sc8180x_intf),
> > +               .intf = sc8180x_intf,
> > +               .vbif_count = ARRAY_SIZE(sdm845_vbif),
> > +               .vbif = sdm845_vbif,
> > +               .reg_dma_count = 1,
> > +               .dma_cfg = sm8150_regdma,
> > +               .perf = sc8180_perf_data,
> > +               .mdss_irqs = 0x3ff,
> > +       };
> > +}
> > +
> >  /*
> >   * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets
> >   * and instance counts.
> > @@ -1191,6 +1311,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
> >         { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
> >         { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
> >         { .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
> > +       { .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180_cfg_init},
> >         { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
> >         { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
> >         { .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init},
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > index c2f34a4f82d9..644e315df0fb 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > @@ -39,6 +39,7 @@
> >  #define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */
> >  #define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
> >  #define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
> > +#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */
> >  #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
> >  #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
> >  #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
> > @@ -287,6 +288,8 @@ enum dpu_qos_lut_usage {
> >         DPU_QOS_LUT_USAGE_LINEAR,
> >         DPU_QOS_LUT_USAGE_MACROTILE,
> >         DPU_QOS_LUT_USAGE_NRT,
> > +       DPU_QOS_LUT_USAGE_CWB,
> > +       DPU_QOS_LUT_USAGE_MACROTILE_QSEED,
> >         DPU_QOS_LUT_USAGE_MAX,
> >  };
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > index 8b01cb660381..7e8f0df2bd88 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > @@ -1228,6 +1228,7 @@ static const struct of_device_id dpu_dt_match[] = {
> >         { .compatible = "qcom,sdm845-dpu", },
> >         { .compatible = "qcom,sc7180-dpu", },
> >         { .compatible = "qcom,sc7280-dpu", },
> > +       { .compatible = "qcom,sc8180x-dpu", },
> >         { .compatible = "qcom,sm8150-dpu", },
> >         { .compatible = "qcom,sm8250-dpu", },
> >         {}
> > diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> > index e1104d2454e2..b5bcbf5c2306 100644
> > --- a/drivers/gpu/drm/msm/msm_drv.c
> > +++ b/drivers/gpu/drm/msm/msm_drv.c
> > @@ -1342,6 +1342,7 @@ static const struct of_device_id dt_match[] = {
> >         { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
> >         { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
> >         { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
> > +       { .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU },
> >         { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
> >         { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
> >         {}
> > --
> > 2.29.2
> >
> 
> 
> -- 
> With best wishes
> Dmitry
Rob Herring May 17, 2021, 9:43 p.m. UTC | #3
On Mon, May 10, 2021 at 11:18:51PM -0500, Bjorn Andersson wrote:
> From: Rob Clark <robdclark@chromium.org>
> 
> Add SC8180x to the hardware catalog, for initial support for the
> platform. Due to limitations in the DP driver only one of the four DP
> interfaces is left enabled.
> 
> The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
> the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
> is flagged appropriately to ensure widebus is disabled - for now.
> 
> Signed-off-by: Rob Clark <robdclark@chromium.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  .../devicetree/bindings/display/msm/dpu.txt   |   4 +-

This is getting converted to schema. Please help that along (it needs 
it).

>  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 121 ++++++++++++++++++
>  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   3 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
>  drivers/gpu/drm/msm/msm_drv.c                 |   1 +
>  5 files changed, 128 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index 586e6eac5b08..b98258374a60 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
>  
>  MDSS:
>  Required properties:
> -- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
> +- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sc8180x-mdss"
>  - reg: physical base address and length of controller's registers.
>  - reg-names: register region names. The following region is required:
>    * "mdss"
> @@ -41,7 +41,7 @@ Optional properties:
>  
>  MDP:
>  Required properties:
> -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
> +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sc8180x-dpu"
>  - reg: physical base address and length of controller's registers.
>  - reg-names : register region names. The following region is required:
>    * "mdp"
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index b569030a0847..81c429ce94a9 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -56,6 +56,10 @@
>  
>  #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
>  
> +#define INTF_SC8180X_MASK BIT(DPU_INTF_INPUT_CTRL) | \
> +			  BIT(DPU_INTF_TE) | \
> +			  BIT(DPU_INTF_WIDEBUS)
> +
>  #define INTR_SC7180_MASK \
>  	(BIT(DPU_IRQ_TYPE_PING_PONG_RD_PTR) |\
>  	BIT(DPU_IRQ_TYPE_PING_PONG_WR_PTR) |\
> @@ -197,6 +201,22 @@ static const struct dpu_caps sm8150_dpu_caps = {
>  	.max_vdeci_exp = MAX_VERT_DECIMATION,
>  };
>  
> +static const struct dpu_caps sc8180_dpu_caps = {
> +	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> +	.max_mixer_blendstages = 0xb,
> +	.qseed_type = DPU_SSPP_SCALER_QSEED3,
> +	.smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> +	.ubwc_version = DPU_HW_UBWC_VER_30,
> +	.has_src_split = true,
> +	.has_dim_layer = true,
> +	.has_idle_pc = true,
> +	.has_3d_merge = false,   /* I think? */
> +	.max_linewidth = 4096,
> +	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> +	.max_hdeci_exp = MAX_HORZ_DECIMATION,
> +	.max_vdeci_exp = MAX_VERT_DECIMATION,
> +};
> +
>  static const struct dpu_caps sm8250_dpu_caps = {
>  	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
>  	.max_mixer_blendstages = 0xb,
> @@ -265,6 +285,35 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = {
>  	},
>  };
>  
> +static const struct dpu_mdp_cfg sc8180_mdp[] = {
> +	{
> +	.name = "top_0", .id = MDP_TOP,
> +	// TODO check len
> +	.base = 0x0, .len = 0x45C,
> +	.features = 0,
> +	.highest_bank_bit = 0x3,
> +	.clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> +			.reg_off = 0x2AC, .bit_off = 0},
> +	.clk_ctrls[DPU_CLK_CTRL_VIG1] = {
> +			.reg_off = 0x2B4, .bit_off = 0},
> +	.clk_ctrls[DPU_CLK_CTRL_VIG2] = {
> +			.reg_off = 0x2BC, .bit_off = 0},
> +	.clk_ctrls[DPU_CLK_CTRL_VIG3] = {
> +			.reg_off = 0x2C4, .bit_off = 0},
> +	.clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> +			.reg_off = 0x2AC, .bit_off = 8},
> +	.clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> +			.reg_off = 0x2B4, .bit_off = 8},
> +	.clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> +			.reg_off = 0x2BC, .bit_off = 8},
> +	.clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> +			.reg_off = 0x2C4, .bit_off = 8},
> +// TODO ???
> +//	.clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
> +//			.reg_off = 0x2BC, .bit_off = 20},
> +	},
> +};
> +
>  static const struct dpu_mdp_cfg sm8250_mdp[] = {
>  	{
>  	.name = "top_0", .id = MDP_TOP,
> @@ -789,6 +838,15 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
>  	INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK),
>  };
>  
> +static const struct dpu_intf_cfg sc8180x_intf[] = {
> +//	INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> +	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC8180X_MASK),
> +	INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC8180X_MASK),
> +//	INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SC8180X_MASK),
> +//	INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, 2, 24, INTF_SC8180X_MASK),
> +	INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, 0, 24, INTF_SC8180X_MASK),
> +};
> +
>  /*************************************************************
>   * VBIF sub blocks config
>   *************************************************************/
> @@ -859,6 +917,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
>  	{.fl = 0, .lut = 0x0011222222223357 },
>  };
>  
> +static const struct dpu_qos_lut_entry sc8180_qos_linear[] = {
> +	{.fl = 4, .lut = 0x0000000000000357 },
> +};
> +
>  static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
>  	{.fl = 10, .lut = 0x344556677},
>  	{.fl = 11, .lut = 0x3344556677},
> @@ -872,6 +934,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = {
>  	{.fl = 0, .lut = 0x0011223344556677},
>  };
>  
> +static const struct dpu_qos_lut_entry sc8180_qos_macrotile[] = {
> +	{.fl = 10, .lut = 0x0000000344556677},
> +};
> +
>  static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = {
>  	{.fl = 0, .lut = 0x0},
>  };
> @@ -976,6 +1042,31 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
>  	.bw_inefficiency_factor = 120,
>  };
>  
> +static const struct dpu_perf_cfg sc8180_perf_data = {
> +	.max_bw_low = 9600000,
> +	.max_bw_high = 9600000,
> +	.min_core_ib = 2400000,
> +	.min_llcc_ib = 800000,
> +	.min_dram_ib = 800000,
> +	.danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0},
> +	.qos_lut_tbl = {
> +		{.nentry = ARRAY_SIZE(sc8180_qos_linear),
> +		.entries = sc8180_qos_linear
> +		},
> +		{.nentry = ARRAY_SIZE(sc8180_qos_macrotile),
> +		.entries = sc8180_qos_macrotile
> +		},
> +		{.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> +		.entries = sc7180_qos_nrt
> +		},
> +		/* TODO: macrotile-qseed is different from macrotile */
> +	},
> +	.cdp_cfg = {
> +		{.rd_enable = 1, .wr_enable = 1},
> +		{.rd_enable = 1, .wr_enable = 0}
> +	},
> +};
> +
>  static const struct dpu_perf_cfg sm8250_perf_data = {
>  	.max_bw_low = 13700000,
>  	.max_bw_high = 16600000,
> @@ -1129,6 +1220,35 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
>  	};
>  }
>  
> +/*
> + * sc8180_cfg_init(): populate sc8180 dpu sub-blocks reg offsets
> + * and instance counts.
> + */
> +static void sc8180_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
> +{
> +	*dpu_cfg = (struct dpu_mdss_cfg){
> +		.caps = &sc8180_dpu_caps,
> +		.mdp_count = ARRAY_SIZE(sc8180_mdp),
> +		.mdp = sc8180_mdp,
> +		.ctl_count = ARRAY_SIZE(sm8150_ctl),
> +		.ctl = sm8150_ctl,
> +		.sspp_count = ARRAY_SIZE(sdm845_sspp),
> +		.sspp = sdm845_sspp,
> +		.mixer_count = ARRAY_SIZE(sm8150_lm),
> +		.mixer = sm8150_lm,
> +		.pingpong_count = ARRAY_SIZE(sm8150_pp),
> +		.pingpong = sm8150_pp,
> +		.intf_count = ARRAY_SIZE(sc8180x_intf),
> +		.intf = sc8180x_intf,
> +		.vbif_count = ARRAY_SIZE(sdm845_vbif),
> +		.vbif = sdm845_vbif,
> +		.reg_dma_count = 1,
> +		.dma_cfg = sm8150_regdma,
> +		.perf = sc8180_perf_data,
> +		.mdss_irqs = 0x3ff,
> +	};
> +}
> +
>  /*
>   * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets
>   * and instance counts.
> @@ -1191,6 +1311,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
>  	{ .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
>  	{ .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
>  	{ .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
> +	{ .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180_cfg_init},
>  	{ .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
>  	{ .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
>  	{ .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init},
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index c2f34a4f82d9..644e315df0fb 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -39,6 +39,7 @@
>  #define DPU_HW_VER_410	DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */
>  #define DPU_HW_VER_500	DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
>  #define DPU_HW_VER_501	DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
> +#define DPU_HW_VER_510	DPU_HW_VER(5, 1, 1) /* sc8180 */
>  #define DPU_HW_VER_600	DPU_HW_VER(6, 0, 0) /* sm8250 */
>  #define DPU_HW_VER_620	DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
>  #define DPU_HW_VER_720	DPU_HW_VER(7, 2, 0) /* sc7280 */
> @@ -287,6 +288,8 @@ enum dpu_qos_lut_usage {
>  	DPU_QOS_LUT_USAGE_LINEAR,
>  	DPU_QOS_LUT_USAGE_MACROTILE,
>  	DPU_QOS_LUT_USAGE_NRT,
> +	DPU_QOS_LUT_USAGE_CWB,
> +	DPU_QOS_LUT_USAGE_MACROTILE_QSEED,
>  	DPU_QOS_LUT_USAGE_MAX,
>  };
>  
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 8b01cb660381..7e8f0df2bd88 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1228,6 +1228,7 @@ static const struct of_device_id dpu_dt_match[] = {
>  	{ .compatible = "qcom,sdm845-dpu", },
>  	{ .compatible = "qcom,sc7180-dpu", },
>  	{ .compatible = "qcom,sc7280-dpu", },
> +	{ .compatible = "qcom,sc8180x-dpu", },
>  	{ .compatible = "qcom,sm8150-dpu", },
>  	{ .compatible = "qcom,sm8250-dpu", },
>  	{}
> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> index e1104d2454e2..b5bcbf5c2306 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -1342,6 +1342,7 @@ static const struct of_device_id dt_match[] = {
>  	{ .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
>  	{ .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
>  	{ .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
> +	{ .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU },
>  	{ .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
>  	{ .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
>  	{}
> -- 
> 2.29.2
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index 586e6eac5b08..b98258374a60 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -8,7 +8,7 @@  The DPU display controller is found in SDM845 SoC.
 
 MDSS:
 Required properties:
-- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
+- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sc8180x-mdss"
 - reg: physical base address and length of controller's registers.
 - reg-names: register region names. The following region is required:
   * "mdss"
@@ -41,7 +41,7 @@  Optional properties:
 
 MDP:
 Required properties:
-- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
+- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sc8180x-dpu"
 - reg: physical base address and length of controller's registers.
 - reg-names : register region names. The following region is required:
   * "mdp"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index b569030a0847..81c429ce94a9 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -56,6 +56,10 @@ 
 
 #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
 
+#define INTF_SC8180X_MASK BIT(DPU_INTF_INPUT_CTRL) | \
+			  BIT(DPU_INTF_TE) | \
+			  BIT(DPU_INTF_WIDEBUS)
+
 #define INTR_SC7180_MASK \
 	(BIT(DPU_IRQ_TYPE_PING_PONG_RD_PTR) |\
 	BIT(DPU_IRQ_TYPE_PING_PONG_WR_PTR) |\
@@ -197,6 +201,22 @@  static const struct dpu_caps sm8150_dpu_caps = {
 	.max_vdeci_exp = MAX_VERT_DECIMATION,
 };
 
+static const struct dpu_caps sc8180_dpu_caps = {
+	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.max_mixer_blendstages = 0xb,
+	.qseed_type = DPU_SSPP_SCALER_QSEED3,
+	.smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
+	.ubwc_version = DPU_HW_UBWC_VER_30,
+	.has_src_split = true,
+	.has_dim_layer = true,
+	.has_idle_pc = true,
+	.has_3d_merge = false,   /* I think? */
+	.max_linewidth = 4096,
+	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+	.max_hdeci_exp = MAX_HORZ_DECIMATION,
+	.max_vdeci_exp = MAX_VERT_DECIMATION,
+};
+
 static const struct dpu_caps sm8250_dpu_caps = {
 	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
 	.max_mixer_blendstages = 0xb,
@@ -265,6 +285,35 @@  static const struct dpu_mdp_cfg sc7180_mdp[] = {
 	},
 };
 
+static const struct dpu_mdp_cfg sc8180_mdp[] = {
+	{
+	.name = "top_0", .id = MDP_TOP,
+	// TODO check len
+	.base = 0x0, .len = 0x45C,
+	.features = 0,
+	.highest_bank_bit = 0x3,
+	.clk_ctrls[DPU_CLK_CTRL_VIG0] = {
+			.reg_off = 0x2AC, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_VIG1] = {
+			.reg_off = 0x2B4, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_VIG2] = {
+			.reg_off = 0x2BC, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_VIG3] = {
+			.reg_off = 0x2C4, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_DMA0] = {
+			.reg_off = 0x2AC, .bit_off = 8},
+	.clk_ctrls[DPU_CLK_CTRL_DMA1] = {
+			.reg_off = 0x2B4, .bit_off = 8},
+	.clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
+			.reg_off = 0x2BC, .bit_off = 8},
+	.clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
+			.reg_off = 0x2C4, .bit_off = 8},
+// TODO ???
+//	.clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
+//			.reg_off = 0x2BC, .bit_off = 20},
+	},
+};
+
 static const struct dpu_mdp_cfg sm8250_mdp[] = {
 	{
 	.name = "top_0", .id = MDP_TOP,
@@ -789,6 +838,15 @@  static const struct dpu_intf_cfg sc7280_intf[] = {
 	INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK),
 };
 
+static const struct dpu_intf_cfg sc8180x_intf[] = {
+//	INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC8180X_MASK),
+	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC8180X_MASK),
+	INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC8180X_MASK),
+//	INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SC8180X_MASK),
+//	INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, 2, 24, INTF_SC8180X_MASK),
+	INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, 0, 24, INTF_SC8180X_MASK),
+};
+
 /*************************************************************
  * VBIF sub blocks config
  *************************************************************/
@@ -859,6 +917,10 @@  static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
 	{.fl = 0, .lut = 0x0011222222223357 },
 };
 
+static const struct dpu_qos_lut_entry sc8180_qos_linear[] = {
+	{.fl = 4, .lut = 0x0000000000000357 },
+};
+
 static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
 	{.fl = 10, .lut = 0x344556677},
 	{.fl = 11, .lut = 0x3344556677},
@@ -872,6 +934,10 @@  static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = {
 	{.fl = 0, .lut = 0x0011223344556677},
 };
 
+static const struct dpu_qos_lut_entry sc8180_qos_macrotile[] = {
+	{.fl = 10, .lut = 0x0000000344556677},
+};
+
 static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = {
 	{.fl = 0, .lut = 0x0},
 };
@@ -976,6 +1042,31 @@  static const struct dpu_perf_cfg sm8150_perf_data = {
 	.bw_inefficiency_factor = 120,
 };
 
+static const struct dpu_perf_cfg sc8180_perf_data = {
+	.max_bw_low = 9600000,
+	.max_bw_high = 9600000,
+	.min_core_ib = 2400000,
+	.min_llcc_ib = 800000,
+	.min_dram_ib = 800000,
+	.danger_lut_tbl = {0xf, 0xffff, 0x0, 0x0},
+	.qos_lut_tbl = {
+		{.nentry = ARRAY_SIZE(sc8180_qos_linear),
+		.entries = sc8180_qos_linear
+		},
+		{.nentry = ARRAY_SIZE(sc8180_qos_macrotile),
+		.entries = sc8180_qos_macrotile
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+		.entries = sc7180_qos_nrt
+		},
+		/* TODO: macrotile-qseed is different from macrotile */
+	},
+	.cdp_cfg = {
+		{.rd_enable = 1, .wr_enable = 1},
+		{.rd_enable = 1, .wr_enable = 0}
+	},
+};
+
 static const struct dpu_perf_cfg sm8250_perf_data = {
 	.max_bw_low = 13700000,
 	.max_bw_high = 16600000,
@@ -1129,6 +1220,35 @@  static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
 	};
 }
 
+/*
+ * sc8180_cfg_init(): populate sc8180 dpu sub-blocks reg offsets
+ * and instance counts.
+ */
+static void sc8180_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
+{
+	*dpu_cfg = (struct dpu_mdss_cfg){
+		.caps = &sc8180_dpu_caps,
+		.mdp_count = ARRAY_SIZE(sc8180_mdp),
+		.mdp = sc8180_mdp,
+		.ctl_count = ARRAY_SIZE(sm8150_ctl),
+		.ctl = sm8150_ctl,
+		.sspp_count = ARRAY_SIZE(sdm845_sspp),
+		.sspp = sdm845_sspp,
+		.mixer_count = ARRAY_SIZE(sm8150_lm),
+		.mixer = sm8150_lm,
+		.pingpong_count = ARRAY_SIZE(sm8150_pp),
+		.pingpong = sm8150_pp,
+		.intf_count = ARRAY_SIZE(sc8180x_intf),
+		.intf = sc8180x_intf,
+		.vbif_count = ARRAY_SIZE(sdm845_vbif),
+		.vbif = sdm845_vbif,
+		.reg_dma_count = 1,
+		.dma_cfg = sm8150_regdma,
+		.perf = sc8180_perf_data,
+		.mdss_irqs = 0x3ff,
+	};
+}
+
 /*
  * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets
  * and instance counts.
@@ -1191,6 +1311,7 @@  static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
 	{ .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
 	{ .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
 	{ .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
+	{ .hw_rev = DPU_HW_VER_510, .cfg_init = sc8180_cfg_init},
 	{ .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
 	{ .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
 	{ .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init},
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index c2f34a4f82d9..644e315df0fb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -39,6 +39,7 @@ 
 #define DPU_HW_VER_410	DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */
 #define DPU_HW_VER_500	DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
 #define DPU_HW_VER_501	DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
+#define DPU_HW_VER_510	DPU_HW_VER(5, 1, 1) /* sc8180 */
 #define DPU_HW_VER_600	DPU_HW_VER(6, 0, 0) /* sm8250 */
 #define DPU_HW_VER_620	DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
 #define DPU_HW_VER_720	DPU_HW_VER(7, 2, 0) /* sc7280 */
@@ -287,6 +288,8 @@  enum dpu_qos_lut_usage {
 	DPU_QOS_LUT_USAGE_LINEAR,
 	DPU_QOS_LUT_USAGE_MACROTILE,
 	DPU_QOS_LUT_USAGE_NRT,
+	DPU_QOS_LUT_USAGE_CWB,
+	DPU_QOS_LUT_USAGE_MACROTILE_QSEED,
 	DPU_QOS_LUT_USAGE_MAX,
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 8b01cb660381..7e8f0df2bd88 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1228,6 +1228,7 @@  static const struct of_device_id dpu_dt_match[] = {
 	{ .compatible = "qcom,sdm845-dpu", },
 	{ .compatible = "qcom,sc7180-dpu", },
 	{ .compatible = "qcom,sc7280-dpu", },
+	{ .compatible = "qcom,sc8180x-dpu", },
 	{ .compatible = "qcom,sm8150-dpu", },
 	{ .compatible = "qcom,sm8250-dpu", },
 	{}
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index e1104d2454e2..b5bcbf5c2306 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1342,6 +1342,7 @@  static const struct of_device_id dt_match[] = {
 	{ .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
 	{ .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
 	{ .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
+	{ .compatible = "qcom,sc8180x-mdss", .data = (void *)KMS_DPU },
 	{ .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
 	{ .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
 	{}