diff mbox series

[v2,1/2] dt-bindings: devfreq: tegra30-actmon: Convert to schema

Message ID 20210601022319.17938-2-digetx@gmail.com (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series Add thermal cooling support to NVIDIA Tegra devfreq | expand

Commit Message

Dmitry Osipenko June 1, 2021, 2:23 a.m. UTC
Convert NVIDIA Tegra ACTMON binding to schema.

Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 .../arm/tegra/nvidia,tegra30-actmon.txt       |  57 ---------
 .../devfreq/nvidia,tegra30-actmon.yaml        | 121 ++++++++++++++++++
 2 files changed, 121 insertions(+), 57 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
 create mode 100644 Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml

Comments

Chanwoo Choi June 1, 2021, 2:55 a.m. UTC | #1
On 6/1/21 11:23 AM, Dmitry Osipenko wrote:
> Convert NVIDIA Tegra ACTMON binding to schema.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  .../arm/tegra/nvidia,tegra30-actmon.txt       |  57 ---------
>  .../devfreq/nvidia,tegra30-actmon.yaml        | 121 ++++++++++++++++++
>  2 files changed, 121 insertions(+), 57 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
>  create mode 100644 Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
> deleted file mode 100644
> index 897eedfa2bc8..000000000000
> --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -NVIDIA Tegra Activity Monitor
> -
> -The activity monitor block collects statistics about the behaviour of other
> -components in the system. This information can be used to derive the rate at
> -which the external memory needs to be clocked in order to serve all requests
> -from the monitored clients.
> -
> -Required properties:
> -- compatible: should be "nvidia,tegra<chip>-actmon"
> -- reg: offset and length of the register set for the device
> -- interrupts: standard interrupt property
> -- clocks: Must contain a phandle and clock specifier pair for each entry in
> -clock-names. See ../../clock/clock-bindings.txt for details.
> -- clock-names: Must include the following entries:
> -  - actmon
> -  - emc
> -- resets: Must contain an entry for each entry in reset-names. See
> -../../reset/reset.txt for details.
> -- reset-names: Must include the following entries:
> -  - actmon
> -- operating-points-v2: See ../bindings/opp/opp.txt for details.
> -- interconnects: Should contain entries for memory clients sitting on
> -                 MC->EMC memory interconnect path.
> -- interconnect-names: Should include name of the interconnect path for each
> -                      interconnect entry. Consult TRM documentation for
> -                      information about available memory clients, see MEMORY
> -                      CONTROLLER section.
> -
> -For each opp entry in 'operating-points-v2' table:
> -- opp-supported-hw: bitfield indicating SoC speedo ID mask
> -- opp-peak-kBps: peak bandwidth of the memory channel
> -
> -Example:
> -	dfs_opp_table: opp-table {
> -		compatible = "operating-points-v2";
> -
> -		opp@12750000 {
> -			opp-hz = /bits/ 64 <12750000>;
> -			opp-supported-hw = <0x000F>;
> -			opp-peak-kBps = <51000>;
> -		};
> -		...
> -	};
> -
> -	actmon@6000c800 {
> -		compatible = "nvidia,tegra124-actmon";
> -		reg = <0x0 0x6000c800 0x0 0x400>;
> -		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> -		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
> -			 <&tegra_car TEGRA124_CLK_EMC>;
> -		clock-names = "actmon", "emc";
> -		resets = <&tegra_car 119>;
> -		reset-names = "actmon";
> -		operating-points-v2 = <&dfs_opp_table>;
> -		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
> -		interconnect-names = "cpu";
> -	};
> diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
> new file mode 100644
> index 000000000000..ba938eed28ee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
> @@ -0,0 +1,121 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: https://protect2.fireeye.com/v1/url?k=c852e9c6-97c9d0fb-c8536289-0cc47a31309a-748d620b8cc48f8b&q=1&e=c1b6a671-e53d-468c-81f5-3e23bd2e67d9&u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fdevfreq%2Fnvidia%2Ctegra30-actmon.yaml%23
> +$schema: https://protect2.fireeye.com/v1/url?k=1abc12fa-45272bc7-1abd99b5-0cc47a31309a-ca738d567d90525e&q=1&e=c1b6a671-e53d-468c-81f5-3e23bd2e67d9&u=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23
> +
> +title: NVIDIA Tegra30 Activity Monitor
> +
> +maintainers:
> +  - Dmitry Osipenko <digetx@gmail.com>
> +  - Jon Hunter <jonathanh@nvidia.com>
> +  - Thierry Reding <thierry.reding@gmail.com>
> +
> +description: |
> +  The activity monitor block collects statistics about the behaviour of other
> +  components in the system. This information can be used to derive the rate at
> +  which the external memory needs to be clocked in order to serve all requests
> +  from the monitored clients.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nvidia,tegra30-actmon
> +      - nvidia,tegra114-actmon
> +      - nvidia,tegra124-actmon
> +      - nvidia,tegra210-actmon
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: actmon
> +      - const: emc
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    items:
> +      - const: actmon
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interconnects:
> +    minItems: 1
> +    maxItems: 12
> +
> +  interconnect-names:
> +    minItems: 1
> +    maxItems: 12
> +    description:
> +      Should include name of the interconnect path for each interconnect
> +      entry. Consult TRM documentation for information about available
> +      memory clients, see MEMORY CONTROLLER and ACTIVITY MONITOR sections.
> +
> +  operating-points-v2:
> +    description:
> +      Should contain freqs and voltages and opp-supported-hw property, which
> +      is a bitfield indicating SoC speedo ID mask.
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - interrupts
> +  - interconnects
> +  - interconnect-names
> +  - operating-points-v2
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/memory/tegra30-mc.h>
> +
> +    mc: memory-controller@7000f000 {
> +        compatible = "nvidia,tegra30-mc";
> +        reg = <0x7000f000 0x400>;
> +        clocks = <&clk 32>;
> +        clock-names = "mc";
> +
> +        interrupts = <0 77 4>;
> +
> +        #iommu-cells = <1>;
> +        #reset-cells = <1>;
> +        #interconnect-cells = <1>;
> +    };
> +
> +    emc: external-memory-controller@7000f400 {
> +        compatible = "nvidia,tegra30-emc";
> +        reg = <0x7000f400 0x400>;
> +        interrupts = <0 78 4>;
> +        clocks = <&clk 57>;
> +
> +        nvidia,memory-controller = <&mc>;
> +        operating-points-v2 = <&dvfs_opp_table>;
> +        power-domains = <&domain>;
> +
> +        #interconnect-cells = <0>;
> +    };
> +
> +    actmon@6000c800 {
> +        compatible = "nvidia,tegra30-actmon";
> +        reg = <0x6000c800 0x400>;
> +        interrupts = <0 45 4>;
> +        clocks = <&clk 119>, <&clk 57>;
> +        clock-names = "actmon", "emc";
> +        resets = <&rst 119>;
> +        reset-names = "actmon";
> +        operating-points-v2 = <&dvfs_opp_table>;
> +        interconnects = <&mc TEGRA30_MC_MPCORER &emc>;
> +        interconnect-names = "cpu-read";
> +    };
> 

If tegra maintainer confirms this patch, I'll take it.
Dmitry Osipenko June 1, 2021, 2:57 a.m. UTC | #2
01.06.2021 05:55, Chanwoo Choi пишет:
> On 6/1/21 11:23 AM, Dmitry Osipenko wrote:
>> Convert NVIDIA Tegra ACTMON binding to schema.
>>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>>  .../arm/tegra/nvidia,tegra30-actmon.txt       |  57 ---------
>>  .../devfreq/nvidia,tegra30-actmon.yaml        | 121 ++++++++++++++++++
>>  2 files changed, 121 insertions(+), 57 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
>>  create mode 100644 Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
>> deleted file mode 100644
>> index 897eedfa2bc8..000000000000
>> --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
>> +++ /dev/null
>> @@ -1,57 +0,0 @@
>> -NVIDIA Tegra Activity Monitor
>> -
>> -The activity monitor block collects statistics about the behaviour of other
>> -components in the system. This information can be used to derive the rate at
>> -which the external memory needs to be clocked in order to serve all requests
>> -from the monitored clients.
>> -
>> -Required properties:
>> -- compatible: should be "nvidia,tegra<chip>-actmon"
>> -- reg: offset and length of the register set for the device
>> -- interrupts: standard interrupt property
>> -- clocks: Must contain a phandle and clock specifier pair for each entry in
>> -clock-names. See ../../clock/clock-bindings.txt for details.
>> -- clock-names: Must include the following entries:
>> -  - actmon
>> -  - emc
>> -- resets: Must contain an entry for each entry in reset-names. See
>> -../../reset/reset.txt for details.
>> -- reset-names: Must include the following entries:
>> -  - actmon
>> -- operating-points-v2: See ../bindings/opp/opp.txt for details.
>> -- interconnects: Should contain entries for memory clients sitting on
>> -                 MC->EMC memory interconnect path.
>> -- interconnect-names: Should include name of the interconnect path for each
>> -                      interconnect entry. Consult TRM documentation for
>> -                      information about available memory clients, see MEMORY
>> -                      CONTROLLER section.
>> -
>> -For each opp entry in 'operating-points-v2' table:
>> -- opp-supported-hw: bitfield indicating SoC speedo ID mask
>> -- opp-peak-kBps: peak bandwidth of the memory channel
>> -
>> -Example:
>> -	dfs_opp_table: opp-table {
>> -		compatible = "operating-points-v2";
>> -
>> -		opp@12750000 {
>> -			opp-hz = /bits/ 64 <12750000>;
>> -			opp-supported-hw = <0x000F>;
>> -			opp-peak-kBps = <51000>;
>> -		};
>> -		...
>> -	};
>> -
>> -	actmon@6000c800 {
>> -		compatible = "nvidia,tegra124-actmon";
>> -		reg = <0x0 0x6000c800 0x0 0x400>;
>> -		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>> -		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
>> -			 <&tegra_car TEGRA124_CLK_EMC>;
>> -		clock-names = "actmon", "emc";
>> -		resets = <&tegra_car 119>;
>> -		reset-names = "actmon";
>> -		operating-points-v2 = <&dfs_opp_table>;
>> -		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
>> -		interconnect-names = "cpu";
>> -	};
>> diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
>> new file mode 100644
>> index 000000000000..ba938eed28ee
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
>> @@ -0,0 +1,121 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: https://protect2.fireeye.com/v1/url?k=c852e9c6-97c9d0fb-c8536289-0cc47a31309a-748d620b8cc48f8b&q=1&e=c1b6a671-e53d-468c-81f5-3e23bd2e67d9&u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fdevfreq%2Fnvidia%2Ctegra30-actmon.yaml%23
>> +$schema: https://protect2.fireeye.com/v1/url?k=1abc12fa-45272bc7-1abd99b5-0cc47a31309a-ca738d567d90525e&q=1&e=c1b6a671-e53d-468c-81f5-3e23bd2e67d9&u=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23
>> +
>> +title: NVIDIA Tegra30 Activity Monitor
>> +
>> +maintainers:
>> +  - Dmitry Osipenko <digetx@gmail.com>
>> +  - Jon Hunter <jonathanh@nvidia.com>
>> +  - Thierry Reding <thierry.reding@gmail.com>
>> +
>> +description: |
>> +  The activity monitor block collects statistics about the behaviour of other
>> +  components in the system. This information can be used to derive the rate at
>> +  which the external memory needs to be clocked in order to serve all requests
>> +  from the monitored clients.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - nvidia,tegra30-actmon
>> +      - nvidia,tegra114-actmon
>> +      - nvidia,tegra124-actmon
>> +      - nvidia,tegra210-actmon
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 2
>> +
>> +  clock-names:
>> +    items:
>> +      - const: actmon
>> +      - const: emc
>> +
>> +  resets:
>> +    maxItems: 1
>> +
>> +  reset-names:
>> +    items:
>> +      - const: actmon
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  interconnects:
>> +    minItems: 1
>> +    maxItems: 12
>> +
>> +  interconnect-names:
>> +    minItems: 1
>> +    maxItems: 12
>> +    description:
>> +      Should include name of the interconnect path for each interconnect
>> +      entry. Consult TRM documentation for information about available
>> +      memory clients, see MEMORY CONTROLLER and ACTIVITY MONITOR sections.
>> +
>> +  operating-points-v2:
>> +    description:
>> +      Should contain freqs and voltages and opp-supported-hw property, which
>> +      is a bitfield indicating SoC speedo ID mask.
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +  - resets
>> +  - reset-names
>> +  - interrupts
>> +  - interconnects
>> +  - interconnect-names
>> +  - operating-points-v2
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/memory/tegra30-mc.h>
>> +
>> +    mc: memory-controller@7000f000 {
>> +        compatible = "nvidia,tegra30-mc";
>> +        reg = <0x7000f000 0x400>;
>> +        clocks = <&clk 32>;
>> +        clock-names = "mc";
>> +
>> +        interrupts = <0 77 4>;
>> +
>> +        #iommu-cells = <1>;
>> +        #reset-cells = <1>;
>> +        #interconnect-cells = <1>;
>> +    };
>> +
>> +    emc: external-memory-controller@7000f400 {
>> +        compatible = "nvidia,tegra30-emc";
>> +        reg = <0x7000f400 0x400>;
>> +        interrupts = <0 78 4>;
>> +        clocks = <&clk 57>;
>> +
>> +        nvidia,memory-controller = <&mc>;
>> +        operating-points-v2 = <&dvfs_opp_table>;
>> +        power-domains = <&domain>;
>> +
>> +        #interconnect-cells = <0>;
>> +    };
>> +
>> +    actmon@6000c800 {
>> +        compatible = "nvidia,tegra30-actmon";
>> +        reg = <0x6000c800 0x400>;
>> +        interrupts = <0 45 4>;
>> +        clocks = <&clk 119>, <&clk 57>;
>> +        clock-names = "actmon", "emc";
>> +        resets = <&rst 119>;
>> +        reset-names = "actmon";
>> +        operating-points-v2 = <&dvfs_opp_table>;
>> +        interconnects = <&mc TEGRA30_MC_MPCORER &emc>;
>> +        interconnect-names = "cpu-read";
>> +    };
>>
> 
> If tegra maintainer confirms this patch, I'll take it.

Okay, thank you.
Thierry Reding June 1, 2021, 11:28 a.m. UTC | #3
On Tue, Jun 01, 2021 at 05:23:18AM +0300, Dmitry Osipenko wrote:
> Convert NVIDIA Tegra ACTMON binding to schema.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  .../arm/tegra/nvidia,tegra30-actmon.txt       |  57 ---------
>  .../devfreq/nvidia,tegra30-actmon.yaml        | 121 ++++++++++++++++++
>  2 files changed, 121 insertions(+), 57 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
>  create mode 100644 Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml

Acked-by: Thierry Reding <treding@nvidia.com>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
deleted file mode 100644
index 897eedfa2bc8..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
+++ /dev/null
@@ -1,57 +0,0 @@ 
-NVIDIA Tegra Activity Monitor
-
-The activity monitor block collects statistics about the behaviour of other
-components in the system. This information can be used to derive the rate at
-which the external memory needs to be clocked in order to serve all requests
-from the monitored clients.
-
-Required properties:
-- compatible: should be "nvidia,tegra<chip>-actmon"
-- reg: offset and length of the register set for the device
-- interrupts: standard interrupt property
-- clocks: Must contain a phandle and clock specifier pair for each entry in
-clock-names. See ../../clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - actmon
-  - emc
-- resets: Must contain an entry for each entry in reset-names. See
-../../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - actmon
-- operating-points-v2: See ../bindings/opp/opp.txt for details.
-- interconnects: Should contain entries for memory clients sitting on
-                 MC->EMC memory interconnect path.
-- interconnect-names: Should include name of the interconnect path for each
-                      interconnect entry. Consult TRM documentation for
-                      information about available memory clients, see MEMORY
-                      CONTROLLER section.
-
-For each opp entry in 'operating-points-v2' table:
-- opp-supported-hw: bitfield indicating SoC speedo ID mask
-- opp-peak-kBps: peak bandwidth of the memory channel
-
-Example:
-	dfs_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp@12750000 {
-			opp-hz = /bits/ 64 <12750000>;
-			opp-supported-hw = <0x000F>;
-			opp-peak-kBps = <51000>;
-		};
-		...
-	};
-
-	actmon@6000c800 {
-		compatible = "nvidia,tegra124-actmon";
-		reg = <0x0 0x6000c800 0x0 0x400>;
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
-			 <&tegra_car TEGRA124_CLK_EMC>;
-		clock-names = "actmon", "emc";
-		resets = <&tegra_car 119>;
-		reset-names = "actmon";
-		operating-points-v2 = <&dfs_opp_table>;
-		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
-		interconnect-names = "cpu";
-	};
diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
new file mode 100644
index 000000000000..ba938eed28ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
@@ -0,0 +1,121 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/nvidia,tegra30-actmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 Activity Monitor
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The activity monitor block collects statistics about the behaviour of other
+  components in the system. This information can be used to derive the rate at
+  which the external memory needs to be clocked in order to serve all requests
+  from the monitored clients.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra30-actmon
+      - nvidia,tegra114-actmon
+      - nvidia,tegra124-actmon
+      - nvidia,tegra210-actmon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: actmon
+      - const: emc
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: actmon
+
+  interrupts:
+    maxItems: 1
+
+  interconnects:
+    minItems: 1
+    maxItems: 12
+
+  interconnect-names:
+    minItems: 1
+    maxItems: 12
+    description:
+      Should include name of the interconnect path for each interconnect
+      entry. Consult TRM documentation for information about available
+      memory clients, see MEMORY CONTROLLER and ACTIVITY MONITOR sections.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC speedo ID mask.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - interrupts
+  - interconnects
+  - interconnect-names
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/memory/tegra30-mc.h>
+
+    mc: memory-controller@7000f000 {
+        compatible = "nvidia,tegra30-mc";
+        reg = <0x7000f000 0x400>;
+        clocks = <&clk 32>;
+        clock-names = "mc";
+
+        interrupts = <0 77 4>;
+
+        #iommu-cells = <1>;
+        #reset-cells = <1>;
+        #interconnect-cells = <1>;
+    };
+
+    emc: external-memory-controller@7000f400 {
+        compatible = "nvidia,tegra30-emc";
+        reg = <0x7000f400 0x400>;
+        interrupts = <0 78 4>;
+        clocks = <&clk 57>;
+
+        nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+        power-domains = <&domain>;
+
+        #interconnect-cells = <0>;
+    };
+
+    actmon@6000c800 {
+        compatible = "nvidia,tegra30-actmon";
+        reg = <0x6000c800 0x400>;
+        interrupts = <0 45 4>;
+        clocks = <&clk 119>, <&clk 57>;
+        clock-names = "actmon", "emc";
+        resets = <&rst 119>;
+        reset-names = "actmon";
+        operating-points-v2 = <&dvfs_opp_table>;
+        interconnects = <&mc TEGRA30_MC_MPCORER &emc>;
+        interconnect-names = "cpu-read";
+    };