Message ID | 1620382648-17395-2-git-send-email-pmaliset@codeaurora.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Add DT bindings and DT nodes for PCIe and PHY in SC7280 | expand |
Quoting Prasad Malisetty (2021-05-07 03:17:26) > Document the PCIe DT bindings for SC7280 SoC.The PCIe IP is similar > to the one used on SM8250. Add the compatible for SC7280. > > Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> > --- > Documentation/devicetree/bindings/pci/qcom,pcie.txt | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt > index 0da458a..e5245ed 100644 > --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt > @@ -12,6 +12,7 @@ > - "qcom,pcie-ipq4019" for ipq4019 > - "qcom,pcie-ipq8074" for ipq8074 > - "qcom,pcie-qcs404" for qcs404 > + - "qcom,pcie-sc7280" for sc7280 > - "qcom,pcie-sdm845" for sdm845 > - "qcom,pcie-sm8250" for sm8250 > > @@ -133,6 +134,22 @@ > - "slave_bus" AXI Slave clock > > - clock-names: > + Usage: required for sc7280 > + Value type: <stringlist> > + Definition: Should contain the following entries > + - "aux" Auxiliary clock > + - "cfg" Configuration clock > + - "bus_master" Master AXI clock > + - "bus_slave" Slave AXI clock > + - "slave_q2a" Slave Q2A clock > + - "tbu" PCIe TBU clock > + - "ddrss_sf_tbu" PCIe SF TBU clock > + - "pipe" PIPE clock > + - "pipe_src" PIPE MUX Is pipe_src necessary? Is it the parent of the pipe clk? If so, please remove it and do whatever is necessary on the pipe clk instead of the parent of the clk. > + - "pipe_ext" PIPE output clock Is pipe output different from pipe? > + - "ref" REFERENCE clock > + >
On Fri, 07 May 2021 15:47:26 +0530, Prasad Malisetty wrote: > Document the PCIe DT bindings for SC7280 SoC.The PCIe IP is similar > to the one used on SM8250. Add the compatible for SC7280. > > Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> > --- > Documentation/devicetree/bindings/pci/qcom,pcie.txt | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > Acked-by: Rob Herring <robh@kernel.org>
On 2021-05-08 01:29, Stephen Boyd wrote: > Quoting Prasad Malisetty (2021-05-07 03:17:26) >> Document the PCIe DT bindings for SC7280 SoC.The PCIe IP is similar >> to the one used on SM8250. Add the compatible for SC7280. >> >> Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> >> --- >> Documentation/devicetree/bindings/pci/qcom,pcie.txt | 17 >> +++++++++++++++++ >> 1 file changed, 17 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt >> b/Documentation/devicetree/bindings/pci/qcom,pcie.txt >> index 0da458a..e5245ed 100644 >> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt >> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt >> @@ -12,6 +12,7 @@ >> - "qcom,pcie-ipq4019" for ipq4019 >> - "qcom,pcie-ipq8074" for ipq8074 >> - "qcom,pcie-qcs404" for qcs404 >> + - "qcom,pcie-sc7280" for sc7280 >> - "qcom,pcie-sdm845" for sdm845 >> - "qcom,pcie-sm8250" for sm8250 >> >> @@ -133,6 +134,22 @@ >> - "slave_bus" AXI Slave clock >> >> - clock-names: >> + Usage: required for sc7280 >> + Value type: <stringlist> >> + Definition: Should contain the following entries >> + - "aux" Auxiliary clock >> + - "cfg" Configuration clock >> + - "bus_master" Master AXI clock >> + - "bus_slave" Slave AXI clock >> + - "slave_q2a" Slave Q2A clock >> + - "tbu" PCIe TBU clock >> + - "ddrss_sf_tbu" PCIe SF TBU clock >> + - "pipe" PIPE clock >> + - "pipe_src" PIPE MUX > > Is pipe_src necessary? Is it the parent of the pipe clk? If so, please > remove it and do whatever is necessary on the pipe clk instead of the > parent of the clk. Here pipe_src is MUX. Newer targets require changing pipe-clk mux to switch between pipe_clk and XO for GDSC enable. After PHY init, need to configure MUX. > >> + - "pipe_ext" PIPE output clock > > Is pipe output different from pipe? > Yes, pipe_ext clock will generate after PHY init. >> + - "ref" REFERENCE clock >> + >>
Quoting Prasad Malisetty (2021-06-04 04:26:57) > On 2021-05-08 01:29, Stephen Boyd wrote: > > Quoting Prasad Malisetty (2021-05-07 03:17:26) > >> Document the PCIe DT bindings for SC7280 SoC.The PCIe IP is similar > >> to the one used on SM8250. Add the compatible for SC7280. > >> > >> Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> > >> --- > >> Documentation/devicetree/bindings/pci/qcom,pcie.txt | 17 > >> +++++++++++++++++ > >> 1 file changed, 17 insertions(+) > >> > >> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt > >> b/Documentation/devicetree/bindings/pci/qcom,pcie.txt > >> index 0da458a..e5245ed 100644 > >> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt > >> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt > >> @@ -12,6 +12,7 @@ > >> - "qcom,pcie-ipq4019" for ipq4019 > >> - "qcom,pcie-ipq8074" for ipq8074 > >> - "qcom,pcie-qcs404" for qcs404 > >> + - "qcom,pcie-sc7280" for sc7280 > >> - "qcom,pcie-sdm845" for sdm845 > >> - "qcom,pcie-sm8250" for sm8250 > >> > >> @@ -133,6 +134,22 @@ > >> - "slave_bus" AXI Slave clock > >> > >> - clock-names: > >> + Usage: required for sc7280 > >> + Value type: <stringlist> > >> + Definition: Should contain the following entries > >> + - "aux" Auxiliary clock > >> + - "cfg" Configuration clock > >> + - "bus_master" Master AXI clock > >> + - "bus_slave" Slave AXI clock > >> + - "slave_q2a" Slave Q2A clock > >> + - "tbu" PCIe TBU clock > >> + - "ddrss_sf_tbu" PCIe SF TBU clock > >> + - "pipe" PIPE clock > >> + - "pipe_src" PIPE MUX > > > > Is pipe_src necessary? Is it the parent of the pipe clk? If so, please > > remove it and do whatever is necessary on the pipe clk instead of the > > parent of the clk. > > Here pipe_src is MUX. Newer targets require changing pipe-clk mux to > switch between pipe_clk and XO for GDSC enable. > After PHY init, need to configure MUX. Ok. I see, so we have to change the parent of the parent of the pipe clk?
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index 0da458a..e5245ed 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -12,6 +12,7 @@ - "qcom,pcie-ipq4019" for ipq4019 - "qcom,pcie-ipq8074" for ipq8074 - "qcom,pcie-qcs404" for qcs404 + - "qcom,pcie-sc7280" for sc7280 - "qcom,pcie-sdm845" for sdm845 - "qcom,pcie-sm8250" for sm8250 @@ -133,6 +134,22 @@ - "slave_bus" AXI Slave clock - clock-names: + Usage: required for sc7280 + Value type: <stringlist> + Definition: Should contain the following entries + - "aux" Auxiliary clock + - "cfg" Configuration clock + - "bus_master" Master AXI clock + - "bus_slave" Slave AXI clock + - "slave_q2a" Slave Q2A clock + - "tbu" PCIe TBU clock + - "ddrss_sf_tbu" PCIe SF TBU clock + - "pipe" PIPE clock + - "pipe_src" PIPE MUX + - "pipe_ext" PIPE output clock + - "ref" REFERENCE clock + +- clock-names: Usage: required for sdm845 Value type: <stringlist> Definition: Should contain the following entries
Document the PCIe DT bindings for SC7280 SoC.The PCIe IP is similar to the one used on SM8250. Add the compatible for SC7280. Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> --- Documentation/devicetree/bindings/pci/qcom,pcie.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)