diff mbox series

[RFC,01/13] soc: dt-bindings: qcom: add gpr bindings

Message ID 20210607152836.17154-2-srinivas.kandagatla@linaro.org (mailing list archive)
State New, archived
Headers show
Series ASoC: qcom: Add AudioReach support | expand

Commit Message

Srinivas Kandagatla June 7, 2021, 3:28 p.m. UTC
Qualcomm Generic Packet router aka GPR is the IPC mechanism found
in AudioReach next generation signal processing framework to perform
command and response messages between various processors.

GPR has concepts of static and dynamic port, all static services like
APM (Audio Processing Manager), PRM (Proxy resource manager) have
fixed port numbers where as dynamic services like graphs have dynamic
port numbers which are allocated at runtime. All GPR packet messages
will have source and destination domain and port along with opcode
and payload.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 .../bindings/soc/qcom/qcom,gpr.yaml           | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gpr.yaml

Comments

Rob Herring June 8, 2021, 8:50 p.m. UTC | #1
On Mon, 07 Jun 2021 16:28:24 +0100, Srinivas Kandagatla wrote:
> Qualcomm Generic Packet router aka GPR is the IPC mechanism found
> in AudioReach next generation signal processing framework to perform
> command and response messages between various processors.
> 
> GPR has concepts of static and dynamic port, all static services like
> APM (Audio Processing Manager), PRM (Proxy resource manager) have
> fixed port numbers where as dynamic services like graphs have dynamic
> port numbers which are allocated at runtime. All GPR packet messages
> will have source and destination domain and port along with opcode
> and payload.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  .../bindings/soc/qcom/qcom,gpr.yaml           | 74 +++++++++++++++++++
>  1 file changed, 74 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gpr.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/soc/qcom/qcom,gpr.example.dts:19:18: fatal error: dt-bindings/soc/qcom,gpr.h: No such file or directory
   19 |         #include <dt-bindings/soc/qcom,gpr.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:380: Documentation/devicetree/bindings/soc/qcom/qcom,gpr.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1416: dt_binding_check] Error 2
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1488752

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gpr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gpr.yaml
new file mode 100644
index 000000000000..cc08ec51de6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gpr.yaml
@@ -0,0 +1,74 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,gpr.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Generic Packet Router binding
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm Generic Packet Router,Shared Memory Manager,
+  used to send and receive packets between Audio DSP and Application processor.
+
+properties:
+  compatible:
+    const: qcom,gpr
+
+  qcom,glink-channels:
+    const: adsp_apps
+    description:
+      glink channel associated with gpr function
+
+  qcom,gpr-domain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+    description:
+      Selects the processor domain for gpr
+        1 = Modem Domain
+        2 = Audio DSP Domain
+        3 = Application Processor Domain
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+#GPR Services
+patternProperties:
+  'gprservice@[0-9]+$':
+    type: object
+    description:
+      GPR node's client devices use subnodes for desired static port services.
+
+    properties:
+      reg:
+        maxItems: 1
+        description: Service port id
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - qcom,glink-channels
+  - qcom,gpr-domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+    gpr {
+        compatible = "qcom,gpr";
+        qcom,glink-channels = "adsp_apps";
+        qcom,gpr-domain = <GPR_DOMAIN_ID_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gprservice@1 {
+          reg = <GPR_APM_MODULE_IID>;
+        };
+    };