diff mbox series

[v7,1/9] dt-bindings: rockchip-sfc: Bindings for Rockchip serial flash controller

Message ID 20210609140412.16058-2-jon.lin@rock-chips.com (mailing list archive)
State New, archived
Headers show
Series Add Rockchip SFC(serial flash controller) support | expand

Commit Message

Jon Lin June 9, 2021, 2:04 p.m. UTC
From: Chris Morgan <macromorgan@hotmail.com>

Add bindings for the Rockchip serial flash controller. New device
specific parameter of rockchip,sfc-no-dma included in documentation.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
---

Changes in v7:
- Fix up the sclk_sfc parent error in rk3036
- Unify to "rockchip,sfc" compatible id because all the feature update
  will have a new IP version, so the driver is used for the SFC IP in
  all SoCs
- Change to use node "sfc" to name the SFC pinctrl group
- Add subnode reg property check
- Add rockchip_sfc_adjust_op_size to workaround in CMD + DUMMY case
- Limit max_iosize to 32KB

Changes in v6:
- Add support in device trees for rv1126(Declared in series 5 but not
  submitted)
- Change to use "clk_sfc" "hclk_sfc" as clock lable, since it does not
  affect interpretation and has been widely used
- Support sfc tx_dual, tx_quad(Declared in series 5 but not submitted)
- Simplify the code, such as remove "rockchip_sfc_register_all"(Declared
  in series 5 but not submitted)
- Support SFC ver4 ver5(Declared in series 5 but not submitted)
- Add author Chris Morgan and Jon Lin to spi-rockchip-sfc.c
- Change to use devm_spi_alloc_master and spi_unregister_master

Changes in v5:
- Add support in device trees for rv1126
- Support sfc tx_dual, tx_quad
- Simplify the code, such as remove "rockchip_sfc_register_all"
- Support SFC ver4 ver5

Changes in v4:
- Changing patch back to an "RFC". An engineer from Rockchip
  reached out to me to let me know they are working on this patch for
  upstream, I am submitting this v4 for the community to see however
  I expect Jon Lin (jon.lin@rock-chips.com) will submit new patches
  soon and these are the ones we should pursue for mainlining. Jon's
  patch series should include support for more hardware than this
  series.
- Clean up documentation more and ensure it is correct per
  make dt_binding_check.
- Add support in device trees for rk3036, rk3308, and rv1108.
- Add ahb clock (hclk_sfc) support for rk3036.
- Change rockchip_sfc_wait_fifo_ready() to use a switch statement.
- Change IRQ code to only mark IRQ as handled if it handles the
  specific IRQ (DMA transfer finish) it is supposed to handle.

Changes in v3:
- Changed the name of the clocks to sfc/ahb (from clk-sfc/clk-hsfc).
- Changed the compatible string from rockchip,sfc to
  rockchip,rk3036-sfc. A quick glance at the datasheets suggests this
  driver should work for the PX30, RK180x, RK3036, RK312x, RK3308 and
  RV1108 SoCs, and possibly more. However, I am currently only able
  to test this on a PX30 (an RK3326). The technical reference manuals
  appear to list the same registers for each device.
- Corrected devicetree documentation for formatting and to note these
  changes.
- Replaced the maintainer with Heiko Stuebner and myself, as we will
  take ownership of this going forward.
- Noted that the device (per the reference manual) supports 4 CS, but
  I am only able to test a single CS (CS 0).
- Reordered patches to comply with upstream rules.

Changes in v2:
- Reimplemented driver using spi-mem subsystem.
- Removed power management code as I couldn't get it working properly.
- Added device tree bindings for Odroid Go Advance.

Changes in v1:
hanges made in this new series versus the v8 of the old series:
- Added function to read spi-rx-bus-width from device tree, in the
  event that the SPI chip supports 4x mode but only has 2 pins
  wired (such as the Odroid Go Advance).
- Changed device tree documentation from txt to yaml format.
- Made "reset" message a dev_dbg from a dev_info.
- Changed read and write fifo functions to remove redundant checks.
- Changed the write and read from relaxed to non-relaxed when
  starting the DMA transfer or reading the DMA IRQ.
- Changed from dma_coerce_mask_and_coherent to just
  dma_set_mask_and_coherent.
- Changed name of get_if_type to rockchip_sfc_get_if_type.

 .../devicetree/bindings/spi/rockchip-sfc.yaml | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/rockchip-sfc.yaml

Comments

Rob Herring (Arm) June 9, 2021, 4:16 p.m. UTC | #1
On Wed, 09 Jun 2021 22:04:04 +0800, Jon Lin wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add bindings for the Rockchip serial flash controller. New device
> specific parameter of rockchip,sfc-no-dma included in documentation.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
> ---
> 
> Changes in v7:
> - Fix up the sclk_sfc parent error in rk3036
> - Unify to "rockchip,sfc" compatible id because all the feature update
>   will have a new IP version, so the driver is used for the SFC IP in
>   all SoCs
> - Change to use node "sfc" to name the SFC pinctrl group
> - Add subnode reg property check
> - Add rockchip_sfc_adjust_op_size to workaround in CMD + DUMMY case
> - Limit max_iosize to 32KB
> 
> Changes in v6:
> - Add support in device trees for rv1126(Declared in series 5 but not
>   submitted)
> - Change to use "clk_sfc" "hclk_sfc" as clock lable, since it does not
>   affect interpretation and has been widely used
> - Support sfc tx_dual, tx_quad(Declared in series 5 but not submitted)
> - Simplify the code, such as remove "rockchip_sfc_register_all"(Declared
>   in series 5 but not submitted)
> - Support SFC ver4 ver5(Declared in series 5 but not submitted)
> - Add author Chris Morgan and Jon Lin to spi-rockchip-sfc.c
> - Change to use devm_spi_alloc_master and spi_unregister_master
> 
> Changes in v5:
> - Add support in device trees for rv1126
> - Support sfc tx_dual, tx_quad
> - Simplify the code, such as remove "rockchip_sfc_register_all"
> - Support SFC ver4 ver5
> 
> Changes in v4:
> - Changing patch back to an "RFC". An engineer from Rockchip
>   reached out to me to let me know they are working on this patch for
>   upstream, I am submitting this v4 for the community to see however
>   I expect Jon Lin (jon.lin@rock-chips.com) will submit new patches
>   soon and these are the ones we should pursue for mainlining. Jon's
>   patch series should include support for more hardware than this
>   series.
> - Clean up documentation more and ensure it is correct per
>   make dt_binding_check.
> - Add support in device trees for rk3036, rk3308, and rv1108.
> - Add ahb clock (hclk_sfc) support for rk3036.
> - Change rockchip_sfc_wait_fifo_ready() to use a switch statement.
> - Change IRQ code to only mark IRQ as handled if it handles the
>   specific IRQ (DMA transfer finish) it is supposed to handle.
> 
> Changes in v3:
> - Changed the name of the clocks to sfc/ahb (from clk-sfc/clk-hsfc).
> - Changed the compatible string from rockchip,sfc to
>   rockchip,rk3036-sfc. A quick glance at the datasheets suggests this
>   driver should work for the PX30, RK180x, RK3036, RK312x, RK3308 and
>   RV1108 SoCs, and possibly more. However, I am currently only able
>   to test this on a PX30 (an RK3326). The technical reference manuals
>   appear to list the same registers for each device.
> - Corrected devicetree documentation for formatting and to note these
>   changes.
> - Replaced the maintainer with Heiko Stuebner and myself, as we will
>   take ownership of this going forward.
> - Noted that the device (per the reference manual) supports 4 CS, but
>   I am only able to test a single CS (CS 0).
> - Reordered patches to comply with upstream rules.
> 
> Changes in v2:
> - Reimplemented driver using spi-mem subsystem.
> - Removed power management code as I couldn't get it working properly.
> - Added device tree bindings for Odroid Go Advance.
> 
> Changes in v1:
> hanges made in this new series versus the v8 of the old series:
> - Added function to read spi-rx-bus-width from device tree, in the
>   event that the SPI chip supports 4x mode but only has 2 pins
>   wired (such as the Odroid Go Advance).
> - Changed device tree documentation from txt to yaml format.
> - Made "reset" message a dev_dbg from a dev_info.
> - Changed read and write fifo functions to remove redundant checks.
> - Changed the write and read from relaxed to non-relaxed when
>   starting the DMA transfer or reading the DMA IRQ.
> - Changed from dma_coerce_mask_and_coherent to just
>   dma_set_mask_and_coherent.
> - Changed name of get_if_type to rockchip_sfc_get_if_type.
> 
>  .../devicetree/bindings/spi/rockchip-sfc.yaml | 88 +++++++++++++++++++
>  1 file changed, 88 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/spi/rockchip-sfc.yaml:45:5: [warning] wrong indentation: expected 2 but found 4 (indentation)

dtschema/dtc warnings/errors:
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1489897

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Rob Herring (Arm) June 10, 2021, 2:43 a.m. UTC | #2
On Wed, Jun 09, 2021 at 10:04:04PM +0800, Jon Lin wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add bindings for the Rockchip serial flash controller. New device
> specific parameter of rockchip,sfc-no-dma included in documentation.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
> ---
> 
> Changes in v7:
> - Fix up the sclk_sfc parent error in rk3036
> - Unify to "rockchip,sfc" compatible id because all the feature update
>   will have a new IP version, so the driver is used for the SFC IP in
>   all SoCs
> - Change to use node "sfc" to name the SFC pinctrl group
> - Add subnode reg property check
> - Add rockchip_sfc_adjust_op_size to workaround in CMD + DUMMY case
> - Limit max_iosize to 32KB
> 
> Changes in v6:
> - Add support in device trees for rv1126(Declared in series 5 but not
>   submitted)
> - Change to use "clk_sfc" "hclk_sfc" as clock lable, since it does not
>   affect interpretation and has been widely used
> - Support sfc tx_dual, tx_quad(Declared in series 5 but not submitted)
> - Simplify the code, such as remove "rockchip_sfc_register_all"(Declared
>   in series 5 but not submitted)
> - Support SFC ver4 ver5(Declared in series 5 but not submitted)
> - Add author Chris Morgan and Jon Lin to spi-rockchip-sfc.c
> - Change to use devm_spi_alloc_master and spi_unregister_master
> 
> Changes in v5:
> - Add support in device trees for rv1126
> - Support sfc tx_dual, tx_quad
> - Simplify the code, such as remove "rockchip_sfc_register_all"
> - Support SFC ver4 ver5
> 
> Changes in v4:
> - Changing patch back to an "RFC". An engineer from Rockchip
>   reached out to me to let me know they are working on this patch for
>   upstream, I am submitting this v4 for the community to see however
>   I expect Jon Lin (jon.lin@rock-chips.com) will submit new patches
>   soon and these are the ones we should pursue for mainlining. Jon's
>   patch series should include support for more hardware than this
>   series.
> - Clean up documentation more and ensure it is correct per
>   make dt_binding_check.
> - Add support in device trees for rk3036, rk3308, and rv1108.
> - Add ahb clock (hclk_sfc) support for rk3036.
> - Change rockchip_sfc_wait_fifo_ready() to use a switch statement.
> - Change IRQ code to only mark IRQ as handled if it handles the
>   specific IRQ (DMA transfer finish) it is supposed to handle.
> 
> Changes in v3:
> - Changed the name of the clocks to sfc/ahb (from clk-sfc/clk-hsfc).
> - Changed the compatible string from rockchip,sfc to
>   rockchip,rk3036-sfc. A quick glance at the datasheets suggests this
>   driver should work for the PX30, RK180x, RK3036, RK312x, RK3308 and
>   RV1108 SoCs, and possibly more. However, I am currently only able
>   to test this on a PX30 (an RK3326). The technical reference manuals
>   appear to list the same registers for each device.
> - Corrected devicetree documentation for formatting and to note these
>   changes.
> - Replaced the maintainer with Heiko Stuebner and myself, as we will
>   take ownership of this going forward.
> - Noted that the device (per the reference manual) supports 4 CS, but
>   I am only able to test a single CS (CS 0).
> - Reordered patches to comply with upstream rules.
> 
> Changes in v2:
> - Reimplemented driver using spi-mem subsystem.
> - Removed power management code as I couldn't get it working properly.
> - Added device tree bindings for Odroid Go Advance.
> 
> Changes in v1:
> hanges made in this new series versus the v8 of the old series:
> - Added function to read spi-rx-bus-width from device tree, in the
>   event that the SPI chip supports 4x mode but only has 2 pins
>   wired (such as the Odroid Go Advance).
> - Changed device tree documentation from txt to yaml format.
> - Made "reset" message a dev_dbg from a dev_info.
> - Changed read and write fifo functions to remove redundant checks.
> - Changed the write and read from relaxed to non-relaxed when
>   starting the DMA transfer or reading the DMA IRQ.
> - Changed from dma_coerce_mask_and_coherent to just
>   dma_set_mask_and_coherent.
> - Changed name of get_if_type to rockchip_sfc_get_if_type.
> 
>  .../devicetree/bindings/spi/rockchip-sfc.yaml | 88 +++++++++++++++++++
>  1 file changed, 88 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
> new file mode 100644
> index 000000000000..42e4198e92af
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip Serial Flash Controller (SFC)
> +
> +maintainers:
> +  - Heiko Stuebner <heiko@sntech.de>
> +  - Chris Morgan <macromorgan@hotmail.com>
> +
> +allOf:
> +  - $ref: spi-controller.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: rockchip,sfc

Use 'enum' instead of oneOf+const.

You need an SoC specific compatible.

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Bus Clock
> +      - description: Module Clock
> +
> +  clock-names:
> +    items:
> +      - const: clk_sfc
> +      - const: hclk_sfc

Do you have these backwards? 'hclk' is usually an AHB bus clock.

Also, '_sfc' is redundant.

> +
> +  power-domains:
> +    maxItems: 1
> +
> +  rockchip,sfc-no-dma:
> +    description: Disable DMA and utilize FIFO mode only
> +    type: boolean
> +
> +patternProperties:
> +    "^flash@[0-3]$":
> +      type: object
> +      properties:
> +        reg:
> +          minimum: 0
> +          maximum: 3
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/px30-cru.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/px30-power.h>
> +
> +    sfc: spi@ff3a0000 {
> +        compatible = "rockchip,sfc";
> +        reg = <0xff3a0000 0x4000>;
> +        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
> +        clock-names = "clk_sfc", "hclk_sfc";
> +        pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
> +        pinctrl-names = "default";
> +        power-domains = <&power PX30_PD_MMC_NAND>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        flash@0 {
> +            compatible = "jedec,spi-nor";
> +            reg = <0>;
> +            spi-max-frequency = <108000000>;
> +            spi-rx-bus-width = <2>;
> +            spi-tx-bus-width = <2>;
> +        };
> +    };
> +
> +...
> -- 
> 2.17.1
Kever Yang June 10, 2021, 3:02 a.m. UTC | #3
Hi Rob,

On 2021/6/10 上午10:43, Rob Herring wrote:
> On Wed, Jun 09, 2021 at 10:04:04PM +0800, Jon Lin wrote:
>> From: Chris Morgan <macromorgan@hotmail.com>
>>
>> Add bindings for the Rockchip serial flash controller. New device
>> specific parameter of rockchip,sfc-no-dma included in documentation.
>>
>> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
>> Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
>> ---
>>
>> Changes in v7:
>> - Fix up the sclk_sfc parent error in rk3036
>> - Unify to "rockchip,sfc" compatible id because all the feature update
>>    will have a new IP version, so the driver is used for the SFC IP in
>>    all SoCs
>> - Change to use node "sfc" to name the SFC pinctrl group
>> - Add subnode reg property check
>> - Add rockchip_sfc_adjust_op_size to workaround in CMD + DUMMY case
>> - Limit max_iosize to 32KB
>>
>> Changes in v6:
>> - Add support in device trees for rv1126(Declared in series 5 but not
>>    submitted)
>> - Change to use "clk_sfc" "hclk_sfc" as clock lable, since it does not
>>    affect interpretation and has been widely used
>> - Support sfc tx_dual, tx_quad(Declared in series 5 but not submitted)
>> - Simplify the code, such as remove "rockchip_sfc_register_all"(Declared
>>    in series 5 but not submitted)
>> - Support SFC ver4 ver5(Declared in series 5 but not submitted)
>> - Add author Chris Morgan and Jon Lin to spi-rockchip-sfc.c
>> - Change to use devm_spi_alloc_master and spi_unregister_master
>>
>> Changes in v5:
>> - Add support in device trees for rv1126
>> - Support sfc tx_dual, tx_quad
>> - Simplify the code, such as remove "rockchip_sfc_register_all"
>> - Support SFC ver4 ver5
>>
>> Changes in v4:
>> - Changing patch back to an "RFC". An engineer from Rockchip
>>    reached out to me to let me know they are working on this patch for
>>    upstream, I am submitting this v4 for the community to see however
>>    I expect Jon Lin (jon.lin@rock-chips.com) will submit new patches
>>    soon and these are the ones we should pursue for mainlining. Jon's
>>    patch series should include support for more hardware than this
>>    series.
>> - Clean up documentation more and ensure it is correct per
>>    make dt_binding_check.
>> - Add support in device trees for rk3036, rk3308, and rv1108.
>> - Add ahb clock (hclk_sfc) support for rk3036.
>> - Change rockchip_sfc_wait_fifo_ready() to use a switch statement.
>> - Change IRQ code to only mark IRQ as handled if it handles the
>>    specific IRQ (DMA transfer finish) it is supposed to handle.
>>
>> Changes in v3:
>> - Changed the name of the clocks to sfc/ahb (from clk-sfc/clk-hsfc).
>> - Changed the compatible string from rockchip,sfc to
>>    rockchip,rk3036-sfc. A quick glance at the datasheets suggests this
>>    driver should work for the PX30, RK180x, RK3036, RK312x, RK3308 and
>>    RV1108 SoCs, and possibly more. However, I am currently only able
>>    to test this on a PX30 (an RK3326). The technical reference manuals
>>    appear to list the same registers for each device.
>> - Corrected devicetree documentation for formatting and to note these
>>    changes.
>> - Replaced the maintainer with Heiko Stuebner and myself, as we will
>>    take ownership of this going forward.
>> - Noted that the device (per the reference manual) supports 4 CS, but
>>    I am only able to test a single CS (CS 0).
>> - Reordered patches to comply with upstream rules.
>>
>> Changes in v2:
>> - Reimplemented driver using spi-mem subsystem.
>> - Removed power management code as I couldn't get it working properly.
>> - Added device tree bindings for Odroid Go Advance.
>>
>> Changes in v1:
>> hanges made in this new series versus the v8 of the old series:
>> - Added function to read spi-rx-bus-width from device tree, in the
>>    event that the SPI chip supports 4x mode but only has 2 pins
>>    wired (such as the Odroid Go Advance).
>> - Changed device tree documentation from txt to yaml format.
>> - Made "reset" message a dev_dbg from a dev_info.
>> - Changed read and write fifo functions to remove redundant checks.
>> - Changed the write and read from relaxed to non-relaxed when
>>    starting the DMA transfer or reading the DMA IRQ.
>> - Changed from dma_coerce_mask_and_coherent to just
>>    dma_set_mask_and_coherent.
>> - Changed name of get_if_type to rockchip_sfc_get_if_type.
>>
>>   .../devicetree/bindings/spi/rockchip-sfc.yaml | 88 +++++++++++++++++++
>>   1 file changed, 88 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
>> new file mode 100644
>> index 000000000000..42e4198e92af
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
>> @@ -0,0 +1,88 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Rockchip Serial Flash Controller (SFC)
>> +
>> +maintainers:
>> +  - Heiko Stuebner <heiko@sntech.de>
>> +  - Chris Morgan <macromorgan@hotmail.com>
>> +
>> +allOf:
>> +  - $ref: spi-controller.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    oneOf:
>> +      - const: rockchip,sfc
> Use 'enum' instead of oneOf+const.
>
> You need an SoC specific compatible.


The rockchip sfc controller is a standalone IP with version register, 
and the driver can

handle all the feature difference inside the IP, so we would like to use 
a more generic

compatible name instead of bind to any of SoC name. So can we use 
"rockchip,sfc"

like "snps,designware-spi", which is a generic one, instead of an SoC 
specific compatible?


Thanks,

- Kever
Ezequiel Garcia June 11, 2021, 4:32 p.m. UTC | #4
Hi all,

On Thu, 10 Jun 2021 at 00:04, Kever Yang <kever.yang@rock-chips.com> wrote:
>
> Hi Rob,
>
> On 2021/6/10 上午10:43, Rob Herring wrote:
> > On Wed, Jun 09, 2021 at 10:04:04PM +0800, Jon Lin wrote:
> >> From: Chris Morgan <macromorgan@hotmail.com>
> >>
> >> Add bindings for the Rockchip serial flash controller. New device
> >> specific parameter of rockchip,sfc-no-dma included in documentation.
> >>
> >> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> >> Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
> >> ---
> >>
> >> Changes in v7:
> >> - Fix up the sclk_sfc parent error in rk3036
> >> - Unify to "rockchip,sfc" compatible id because all the feature update
> >>    will have a new IP version, so the driver is used for the SFC IP in
> >>    all SoCs
> >> - Change to use node "sfc" to name the SFC pinctrl group
> >> - Add subnode reg property check
> >> - Add rockchip_sfc_adjust_op_size to workaround in CMD + DUMMY case
> >> - Limit max_iosize to 32KB
> >>
> >> Changes in v6:
> >> - Add support in device trees for rv1126(Declared in series 5 but not
> >>    submitted)
> >> - Change to use "clk_sfc" "hclk_sfc" as clock lable, since it does not
> >>    affect interpretation and has been widely used
> >> - Support sfc tx_dual, tx_quad(Declared in series 5 but not submitted)
> >> - Simplify the code, such as remove "rockchip_sfc_register_all"(Declared
> >>    in series 5 but not submitted)
> >> - Support SFC ver4 ver5(Declared in series 5 but not submitted)
> >> - Add author Chris Morgan and Jon Lin to spi-rockchip-sfc.c
> >> - Change to use devm_spi_alloc_master and spi_unregister_master
> >>
> >> Changes in v5:
> >> - Add support in device trees for rv1126
> >> - Support sfc tx_dual, tx_quad
> >> - Simplify the code, such as remove "rockchip_sfc_register_all"
> >> - Support SFC ver4 ver5
> >>
> >> Changes in v4:
> >> - Changing patch back to an "RFC". An engineer from Rockchip
> >>    reached out to me to let me know they are working on this patch for
> >>    upstream, I am submitting this v4 for the community to see however
> >>    I expect Jon Lin (jon.lin@rock-chips.com) will submit new patches
> >>    soon and these are the ones we should pursue for mainlining. Jon's
> >>    patch series should include support for more hardware than this
> >>    series.
> >> - Clean up documentation more and ensure it is correct per
> >>    make dt_binding_check.
> >> - Add support in device trees for rk3036, rk3308, and rv1108.
> >> - Add ahb clock (hclk_sfc) support for rk3036.
> >> - Change rockchip_sfc_wait_fifo_ready() to use a switch statement.
> >> - Change IRQ code to only mark IRQ as handled if it handles the
> >>    specific IRQ (DMA transfer finish) it is supposed to handle.
> >>
> >> Changes in v3:
> >> - Changed the name of the clocks to sfc/ahb (from clk-sfc/clk-hsfc).
> >> - Changed the compatible string from rockchip,sfc to
> >>    rockchip,rk3036-sfc. A quick glance at the datasheets suggests this
> >>    driver should work for the PX30, RK180x, RK3036, RK312x, RK3308 and
> >>    RV1108 SoCs, and possibly more. However, I am currently only able
> >>    to test this on a PX30 (an RK3326). The technical reference manuals
> >>    appear to list the same registers for each device.
> >> - Corrected devicetree documentation for formatting and to note these
> >>    changes.
> >> - Replaced the maintainer with Heiko Stuebner and myself, as we will
> >>    take ownership of this going forward.
> >> - Noted that the device (per the reference manual) supports 4 CS, but
> >>    I am only able to test a single CS (CS 0).
> >> - Reordered patches to comply with upstream rules.
> >>
> >> Changes in v2:
> >> - Reimplemented driver using spi-mem subsystem.
> >> - Removed power management code as I couldn't get it working properly.
> >> - Added device tree bindings for Odroid Go Advance.
> >>
> >> Changes in v1:
> >> hanges made in this new series versus the v8 of the old series:
> >> - Added function to read spi-rx-bus-width from device tree, in the
> >>    event that the SPI chip supports 4x mode but only has 2 pins
> >>    wired (such as the Odroid Go Advance).
> >> - Changed device tree documentation from txt to yaml format.
> >> - Made "reset" message a dev_dbg from a dev_info.
> >> - Changed read and write fifo functions to remove redundant checks.
> >> - Changed the write and read from relaxed to non-relaxed when
> >>    starting the DMA transfer or reading the DMA IRQ.
> >> - Changed from dma_coerce_mask_and_coherent to just
> >>    dma_set_mask_and_coherent.
> >> - Changed name of get_if_type to rockchip_sfc_get_if_type.
> >>
> >>   .../devicetree/bindings/spi/rockchip-sfc.yaml | 88 +++++++++++++++++++
> >>   1 file changed, 88 insertions(+)
> >>   create mode 100644 Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
> >> new file mode 100644
> >> index 000000000000..42e4198e92af
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
> >> @@ -0,0 +1,88 @@
> >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: Rockchip Serial Flash Controller (SFC)
> >> +
> >> +maintainers:
> >> +  - Heiko Stuebner <heiko@sntech.de>
> >> +  - Chris Morgan <macromorgan@hotmail.com>
> >> +
> >> +allOf:
> >> +  - $ref: spi-controller.yaml#
> >> +
> >> +properties:
> >> +  compatible:
> >> +    oneOf:
> >> +      - const: rockchip,sfc
> > Use 'enum' instead of oneOf+const.
> >
> > You need an SoC specific compatible.
>
>
> The rockchip sfc controller is a standalone IP with version register,
> and the driver can
>
> handle all the feature difference inside the IP, so we would like to use
> a more generic
>
> compatible name instead of bind to any of SoC name. So can we use
> "rockchip,sfc"
>
> like "snps,designware-spi", which is a generic one, instead of an SoC
> specific compatible?
>

IIUC, the way this works is along these lines:

* The SFC driver can only care for the rockchip,sfc compatible string
and, if suitable, use the IP version register mentioned by Kever [1].

* The bindings doc specifies both the SoC-specific and the generic one
with:

      - items:
          - enum:
              - rockchip,px30-sfc
          - const: rockchip,sfc

* The device tree lists both as well:

compatible = "rockchip,px30-sfc", "rockchip,sfc";

This can apply to all IP cores really; and will allow some
compatibility between the downstream/vendor device tree
and upstream.

This scheme is indeed more convoluted than just
picking any SoC name for the compatible string, and
use that compatible string for all the SoCs (given they
are all compatible, again as per [1]).

IOW, you only have "rockchip,px30-sfc" in the bindings,
in the devicetree files and in the driver.

[1] https://lkml.org/lkml/2021/6/8/2030

Thanks!
Ezequiel
Rob Herring (Arm) June 16, 2021, 3:38 p.m. UTC | #5
On Fri, Jun 11, 2021 at 10:33 AM Ezequiel Garcia
<ezequiel@vanguardiasur.com.ar> wrote:
>
> Hi all,
>
> On Thu, 10 Jun 2021 at 00:04, Kever Yang <kever.yang@rock-chips.com> wrote:
> >
> > Hi Rob,
> >
> > On 2021/6/10 上午10:43, Rob Herring wrote:
> > > On Wed, Jun 09, 2021 at 10:04:04PM +0800, Jon Lin wrote:
> > >> From: Chris Morgan <macromorgan@hotmail.com>
> > >>
> > >> Add bindings for the Rockchip serial flash controller. New device
> > >> specific parameter of rockchip,sfc-no-dma included in documentation.
> > >>
> > >> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> > >> Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
> > >> ---
> > >>
> > >> Changes in v7:
> > >> - Fix up the sclk_sfc parent error in rk3036
> > >> - Unify to "rockchip,sfc" compatible id because all the feature update
> > >>    will have a new IP version, so the driver is used for the SFC IP in
> > >>    all SoCs
> > >> - Change to use node "sfc" to name the SFC pinctrl group
> > >> - Add subnode reg property check
> > >> - Add rockchip_sfc_adjust_op_size to workaround in CMD + DUMMY case
> > >> - Limit max_iosize to 32KB
> > >>
> > >> Changes in v6:
> > >> - Add support in device trees for rv1126(Declared in series 5 but not
> > >>    submitted)
> > >> - Change to use "clk_sfc" "hclk_sfc" as clock lable, since it does not
> > >>    affect interpretation and has been widely used
> > >> - Support sfc tx_dual, tx_quad(Declared in series 5 but not submitted)
> > >> - Simplify the code, such as remove "rockchip_sfc_register_all"(Declared
> > >>    in series 5 but not submitted)
> > >> - Support SFC ver4 ver5(Declared in series 5 but not submitted)
> > >> - Add author Chris Morgan and Jon Lin to spi-rockchip-sfc.c
> > >> - Change to use devm_spi_alloc_master and spi_unregister_master
> > >>
> > >> Changes in v5:
> > >> - Add support in device trees for rv1126
> > >> - Support sfc tx_dual, tx_quad
> > >> - Simplify the code, such as remove "rockchip_sfc_register_all"
> > >> - Support SFC ver4 ver5
> > >>
> > >> Changes in v4:
> > >> - Changing patch back to an "RFC". An engineer from Rockchip
> > >>    reached out to me to let me know they are working on this patch for
> > >>    upstream, I am submitting this v4 for the community to see however
> > >>    I expect Jon Lin (jon.lin@rock-chips.com) will submit new patches
> > >>    soon and these are the ones we should pursue for mainlining. Jon's
> > >>    patch series should include support for more hardware than this
> > >>    series.
> > >> - Clean up documentation more and ensure it is correct per
> > >>    make dt_binding_check.
> > >> - Add support in device trees for rk3036, rk3308, and rv1108.
> > >> - Add ahb clock (hclk_sfc) support for rk3036.
> > >> - Change rockchip_sfc_wait_fifo_ready() to use a switch statement.
> > >> - Change IRQ code to only mark IRQ as handled if it handles the
> > >>    specific IRQ (DMA transfer finish) it is supposed to handle.
> > >>
> > >> Changes in v3:
> > >> - Changed the name of the clocks to sfc/ahb (from clk-sfc/clk-hsfc).
> > >> - Changed the compatible string from rockchip,sfc to
> > >>    rockchip,rk3036-sfc. A quick glance at the datasheets suggests this
> > >>    driver should work for the PX30, RK180x, RK3036, RK312x, RK3308 and
> > >>    RV1108 SoCs, and possibly more. However, I am currently only able
> > >>    to test this on a PX30 (an RK3326). The technical reference manuals
> > >>    appear to list the same registers for each device.
> > >> - Corrected devicetree documentation for formatting and to note these
> > >>    changes.
> > >> - Replaced the maintainer with Heiko Stuebner and myself, as we will
> > >>    take ownership of this going forward.
> > >> - Noted that the device (per the reference manual) supports 4 CS, but
> > >>    I am only able to test a single CS (CS 0).
> > >> - Reordered patches to comply with upstream rules.
> > >>
> > >> Changes in v2:
> > >> - Reimplemented driver using spi-mem subsystem.
> > >> - Removed power management code as I couldn't get it working properly.
> > >> - Added device tree bindings for Odroid Go Advance.
> > >>
> > >> Changes in v1:
> > >> hanges made in this new series versus the v8 of the old series:
> > >> - Added function to read spi-rx-bus-width from device tree, in the
> > >>    event that the SPI chip supports 4x mode but only has 2 pins
> > >>    wired (such as the Odroid Go Advance).
> > >> - Changed device tree documentation from txt to yaml format.
> > >> - Made "reset" message a dev_dbg from a dev_info.
> > >> - Changed read and write fifo functions to remove redundant checks.
> > >> - Changed the write and read from relaxed to non-relaxed when
> > >>    starting the DMA transfer or reading the DMA IRQ.
> > >> - Changed from dma_coerce_mask_and_coherent to just
> > >>    dma_set_mask_and_coherent.
> > >> - Changed name of get_if_type to rockchip_sfc_get_if_type.
> > >>
> > >>   .../devicetree/bindings/spi/rockchip-sfc.yaml | 88 +++++++++++++++++++
> > >>   1 file changed, 88 insertions(+)
> > >>   create mode 100644 Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
> > >>
> > >> diff --git a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
> > >> new file mode 100644
> > >> index 000000000000..42e4198e92af
> > >> --- /dev/null
> > >> +++ b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
> > >> @@ -0,0 +1,88 @@
> > >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > >> +%YAML 1.2
> > >> +---
> > >> +$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
> > >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > >> +
> > >> +title: Rockchip Serial Flash Controller (SFC)
> > >> +
> > >> +maintainers:
> > >> +  - Heiko Stuebner <heiko@sntech.de>
> > >> +  - Chris Morgan <macromorgan@hotmail.com>
> > >> +
> > >> +allOf:
> > >> +  - $ref: spi-controller.yaml#
> > >> +
> > >> +properties:
> > >> +  compatible:
> > >> +    oneOf:
> > >> +      - const: rockchip,sfc
> > > Use 'enum' instead of oneOf+const.
> > >
> > > You need an SoC specific compatible.
> >
> >
> > The rockchip sfc controller is a standalone IP with version register,
> > and the driver can
> >
> > handle all the feature difference inside the IP, so we would like to use
> > a more generic

Okay, if the version register can be relied on, then this is fine.
Just add a comment that further differentiation is done using a
version register.

> >
> > compatible name instead of bind to any of SoC name. So can we use
> > "rockchip,sfc"
> >
> > like "snps,designware-spi", which is a generic one, instead of an SoC
> > specific compatible?

That's a licensed IP which is a bit different. Though generic names on
those are useless too. There's different versions and different
integration quirks.

> >
>
> IIUC, the way this works is along these lines:
>
> * The SFC driver can only care for the rockchip,sfc compatible string
> and, if suitable, use the IP version register mentioned by Kever [1].
>
> * The bindings doc specifies both the SoC-specific and the generic one
> with:
>
>       - items:
>           - enum:
>               - rockchip,px30-sfc
>           - const: rockchip,sfc
>
> * The device tree lists both as well:
>
> compatible = "rockchip,px30-sfc", "rockchip,sfc";
>
> This can apply to all IP cores really; and will allow some
> compatibility between the downstream/vendor device tree
> and upstream.
>
> This scheme is indeed more convoluted than just
> picking any SoC name for the compatible string, and
> use that compatible string for all the SoCs (given they
> are all compatible, again as per [1]).
>
> IOW, you only have "rockchip,px30-sfc" in the bindings,
> in the devicetree files and in the driver.

This is fine too, but again if a version or capability register is
sufficient, no need to put this into DT. Maybe someday h/w designers
will clue in and always have version and/or capability registers.

Rob
Kever Yang June 17, 2021, 1:51 a.m. UTC | #6
Hi Rob,

On 2021/6/16 下午11:38, Rob Herring wrote:
> On Fri, Jun 11, 2021 at 10:33 AM Ezequiel Garcia
> <ezequiel@vanguardiasur.com.ar> wrote:
>> Hi all,
>>
>> On Thu, 10 Jun 2021 at 00:04, Kever Yang <kever.yang@rock-chips.com> wrote:
>>> Hi Rob,
>>>
>>> On 2021/6/10 上午10:43, Rob Herring wrote:
>>>> On Wed, Jun 09, 2021 at 10:04:04PM +0800, Jon Lin wrote:
>>>>> From: Chris Morgan <macromorgan@hotmail.com>
>>>>>
>>>>> Add bindings for the Rockchip serial flash controller. New device
>>>>> specific parameter of rockchip,sfc-no-dma included in documentation.
>>>>>
>>>>> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
>>>>> Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
>>>>> ---
>>>>>
>>>>> Changes in v7:
>>>>> - Fix up the sclk_sfc parent error in rk3036
>>>>> - Unify to "rockchip,sfc" compatible id because all the feature update
>>>>>     will have a new IP version, so the driver is used for the SFC IP in
>>>>>     all SoCs
>>>>> - Change to use node "sfc" to name the SFC pinctrl group
>>>>> - Add subnode reg property check
>>>>> - Add rockchip_sfc_adjust_op_size to workaround in CMD + DUMMY case
>>>>> - Limit max_iosize to 32KB
>>>>>
>>>>> Changes in v6:
>>>>> - Add support in device trees for rv1126(Declared in series 5 but not
>>>>>     submitted)
>>>>> - Change to use "clk_sfc" "hclk_sfc" as clock lable, since it does not
>>>>>     affect interpretation and has been widely used
>>>>> - Support sfc tx_dual, tx_quad(Declared in series 5 but not submitted)
>>>>> - Simplify the code, such as remove "rockchip_sfc_register_all"(Declared
>>>>>     in series 5 but not submitted)
>>>>> - Support SFC ver4 ver5(Declared in series 5 but not submitted)
>>>>> - Add author Chris Morgan and Jon Lin to spi-rockchip-sfc.c
>>>>> - Change to use devm_spi_alloc_master and spi_unregister_master
>>>>>
>>>>> Changes in v5:
>>>>> - Add support in device trees for rv1126
>>>>> - Support sfc tx_dual, tx_quad
>>>>> - Simplify the code, such as remove "rockchip_sfc_register_all"
>>>>> - Support SFC ver4 ver5
>>>>>
>>>>> Changes in v4:
>>>>> - Changing patch back to an "RFC". An engineer from Rockchip
>>>>>     reached out to me to let me know they are working on this patch for
>>>>>     upstream, I am submitting this v4 for the community to see however
>>>>>     I expect Jon Lin (jon.lin@rock-chips.com) will submit new patches
>>>>>     soon and these are the ones we should pursue for mainlining. Jon's
>>>>>     patch series should include support for more hardware than this
>>>>>     series.
>>>>> - Clean up documentation more and ensure it is correct per
>>>>>     make dt_binding_check.
>>>>> - Add support in device trees for rk3036, rk3308, and rv1108.
>>>>> - Add ahb clock (hclk_sfc) support for rk3036.
>>>>> - Change rockchip_sfc_wait_fifo_ready() to use a switch statement.
>>>>> - Change IRQ code to only mark IRQ as handled if it handles the
>>>>>     specific IRQ (DMA transfer finish) it is supposed to handle.
>>>>>
>>>>> Changes in v3:
>>>>> - Changed the name of the clocks to sfc/ahb (from clk-sfc/clk-hsfc).
>>>>> - Changed the compatible string from rockchip,sfc to
>>>>>     rockchip,rk3036-sfc. A quick glance at the datasheets suggests this
>>>>>     driver should work for the PX30, RK180x, RK3036, RK312x, RK3308 and
>>>>>     RV1108 SoCs, and possibly more. However, I am currently only able
>>>>>     to test this on a PX30 (an RK3326). The technical reference manuals
>>>>>     appear to list the same registers for each device.
>>>>> - Corrected devicetree documentation for formatting and to note these
>>>>>     changes.
>>>>> - Replaced the maintainer with Heiko Stuebner and myself, as we will
>>>>>     take ownership of this going forward.
>>>>> - Noted that the device (per the reference manual) supports 4 CS, but
>>>>>     I am only able to test a single CS (CS 0).
>>>>> - Reordered patches to comply with upstream rules.
>>>>>
>>>>> Changes in v2:
>>>>> - Reimplemented driver using spi-mem subsystem.
>>>>> - Removed power management code as I couldn't get it working properly.
>>>>> - Added device tree bindings for Odroid Go Advance.
>>>>>
>>>>> Changes in v1:
>>>>> hanges made in this new series versus the v8 of the old series:
>>>>> - Added function to read spi-rx-bus-width from device tree, in the
>>>>>     event that the SPI chip supports 4x mode but only has 2 pins
>>>>>     wired (such as the Odroid Go Advance).
>>>>> - Changed device tree documentation from txt to yaml format.
>>>>> - Made "reset" message a dev_dbg from a dev_info.
>>>>> - Changed read and write fifo functions to remove redundant checks.
>>>>> - Changed the write and read from relaxed to non-relaxed when
>>>>>     starting the DMA transfer or reading the DMA IRQ.
>>>>> - Changed from dma_coerce_mask_and_coherent to just
>>>>>     dma_set_mask_and_coherent.
>>>>> - Changed name of get_if_type to rockchip_sfc_get_if_type.
>>>>>
>>>>>    .../devicetree/bindings/spi/rockchip-sfc.yaml | 88 +++++++++++++++++++
>>>>>    1 file changed, 88 insertions(+)
>>>>>    create mode 100644 Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
>>>>> new file mode 100644
>>>>> index 000000000000..42e4198e92af
>>>>> --- /dev/null
>>>>> +++ b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
>>>>> @@ -0,0 +1,88 @@
>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>>> +%YAML 1.2
>>>>> +---
>>>>> +$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>>> +
>>>>> +title: Rockchip Serial Flash Controller (SFC)
>>>>> +
>>>>> +maintainers:
>>>>> +  - Heiko Stuebner <heiko@sntech.de>
>>>>> +  - Chris Morgan <macromorgan@hotmail.com>
>>>>> +
>>>>> +allOf:
>>>>> +  - $ref: spi-controller.yaml#
>>>>> +
>>>>> +properties:
>>>>> +  compatible:
>>>>> +    oneOf:
>>>>> +      - const: rockchip,sfc
>>>> Use 'enum' instead of oneOf+const.
>>>>
>>>> You need an SoC specific compatible.
>>>
>>> The rockchip sfc controller is a standalone IP with version register,
>>> and the driver can
>>>
>>> handle all the feature difference inside the IP, so we would like to use
>>> a more generic
> Okay, if the version register can be relied on, then this is fine.
> Just add a comment that further differentiation is done using a
> version register.


Thanks for your confirm, this will make things much simple for driver 
maintain.

@Jon, please update your patch per Rob's requirement.


Thanks,
- Kever
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
new file mode 100644
index 000000000000..42e4198e92af
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
@@ -0,0 +1,88 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Serial Flash Controller (SFC)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,sfc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: clk_sfc
+      - const: hclk_sfc
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,sfc-no-dma:
+    description: Disable DMA and utilize FIFO mode only
+    type: boolean
+
+patternProperties:
+    "^flash@[0-3]$":
+      type: object
+      properties:
+        reg:
+          minimum: 0
+          maximum: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/px30-power.h>
+
+    sfc: spi@ff3a0000 {
+        compatible = "rockchip,sfc";
+        reg = <0xff3a0000 0x4000>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+        clock-names = "clk_sfc", "hclk_sfc";
+        pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
+        pinctrl-names = "default";
+        power-domains = <&power PX30_PD_MMC_NAND>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <108000000>;
+            spi-rx-bus-width = <2>;
+            spi-tx-bus-width = <2>;
+        };
+    };
+
+...