diff mbox series

[09/12] wilc1000: avoid 'isinit' static by moving inside priv data

Message ID 20210423182925.5865-10-ajay.kathat@microchip.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series wilc1000: added chip wakeup support and few fixes | expand

Commit Message

Ajay Singh April 23, 2021, 6:29 p.m. UTC 
From: Ajay Singh <ajay.kathat@microchip.com>

Instead of using static variable(isinit) move to priv struct.
Added hif_is_init function to set is_init variable.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
---
 .../net/wireless/microchip/wilc1000/sdio.c    | 13 +++++++++++
 drivers/net/wireless/microchip/wilc1000/spi.c | 22 +++++++++++++------
 .../net/wireless/microchip/wilc1000/wlan.c    |  2 +-
 .../net/wireless/microchip/wilc1000/wlan.h    |  1 +
 4 files changed, 30 insertions(+), 8 deletions(-)

Comments

Kalle Valo June 24, 2021, 9:40 a.m. UTC | #1 
<Ajay.Kathat@microchip.com> writes:

> From: Ajay Singh <ajay.kathat@microchip.com>
>
> Instead of using static variable(isinit) move to priv struct.
> Added hif_is_init function to set is_init variable.

This is a good patch. But I also see one more static non-const variable:

wlan.c:       static u32 chipid;

Upstream drivers should not use static variables, unless they are const.
Please fix that also, but in a separate patch of course.
diff mbox series

Patch

diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c
index db490f449c27..9c9f46a171b3 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c
@@ -26,6 +26,7 @@  static const struct sdio_device_id wilc_sdio_ids[] = {
 struct wilc_sdio {
 	bool irq_gpio;
 	u32 block_size;
+	bool is_init;
 	int has_thrpt_enh3;
 };
 
@@ -188,6 +189,13 @@  static int wilc_sdio_reset(struct wilc *wilc)
 	return 0;
 }
 
+static bool wilc_sdio_is_init(struct wilc *wilc)
+{
+	struct wilc_sdio *sdio_priv = wilc->bus_data;
+
+	return sdio_priv->is_init;
+}
+
 static int wilc_sdio_suspend(struct device *dev)
 {
 	struct sdio_func *func = dev_to_sdio_func(dev);
@@ -576,6 +584,9 @@  static int wilc_sdio_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
 
 static int wilc_sdio_deinit(struct wilc *wilc)
 {
+	struct wilc_sdio *sdio_priv = wilc->bus_data;
+
+	sdio_priv->is_init = false;
 	return 0;
 }
 
@@ -695,6 +706,7 @@  static int wilc_sdio_init(struct wilc *wilc, bool resume)
 			 sdio_priv->has_thrpt_enh3);
 	}
 
+	sdio_priv->is_init = true;
 	return 0;
 }
 
@@ -976,6 +988,7 @@  static const struct wilc_hif_func wilc_hif_sdio = {
 	.enable_interrupt = wilc_sdio_enable_interrupt,
 	.disable_interrupt = wilc_sdio_disable_interrupt,
 	.hif_reset = wilc_sdio_reset,
+	.hif_is_init = wilc_sdio_is_init,
 };
 
 static int wilc_sdio_resume(struct device *dev)
diff --git a/drivers/net/wireless/microchip/wilc1000/spi.c b/drivers/net/wireless/microchip/wilc1000/spi.c
index 4f5464170426..8e88986db9a4 100644
--- a/drivers/net/wireless/microchip/wilc1000/spi.c
+++ b/drivers/net/wireless/microchip/wilc1000/spi.c
@@ -42,6 +42,7 @@  struct wilc_spi {
 	bool probing_crc;	/* true if we're probing chip's CRC config */
 	bool crc7_enabled;	/* true if crc7 is currently enabled */
 	bool crc16_enabled;	/* true if crc16 is currently enabled */
+	bool is_init;
 };
 
 static const struct wilc_hif_func wilc_hif_spi;
@@ -971,11 +972,19 @@  static int wilc_spi_reset(struct wilc *wilc)
 	return result;
 }
 
+static bool wilc_spi_is_init(struct wilc *wilc)
+{
+	struct wilc_spi *spi_priv = wilc->bus_data;
+
+	return spi_priv->is_init;
+}
+
 static int wilc_spi_deinit(struct wilc *wilc)
 {
-	/*
-	 * TODO:
-	 */
+	struct wilc_spi *spi_priv = wilc->bus_data;
+
+	spi_priv->is_init = false;
+
 	return 0;
 }
 
@@ -985,10 +994,9 @@  static int wilc_spi_init(struct wilc *wilc, bool resume)
 	struct wilc_spi *spi_priv = wilc->bus_data;
 	u32 reg;
 	u32 chipid;
-	static int isinit;
 	int ret, i;
 
-	if (isinit) {
+	if (spi_priv->is_init) {
 		ret = wilc_spi_read_reg(wilc, WILC_CHIPID, &chipid);
 		if (ret)
 			dev_err(&spi->dev, "Fail cmd read chip id...\n");
@@ -1059,8 +1067,7 @@  static int wilc_spi_init(struct wilc *wilc, bool resume)
 		return ret;
 	}
 
-	isinit = 1;
-
+	spi_priv->is_init = true;
 	return 0;
 }
 
@@ -1189,4 +1196,5 @@  static const struct wilc_hif_func wilc_hif_spi = {
 	.hif_block_rx_ext = wilc_spi_read,
 	.hif_sync_ext = wilc_spi_sync_ext,
 	.hif_reset = wilc_spi_reset,
+	.hif_is_init = wilc_spi_is_init,
 };
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 24e016a0dfa8..6ae5d82c6f99 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -1255,7 +1255,7 @@  void wilc_wlan_cleanup(struct net_device *dev)
 	wilc->rx_buffer = NULL;
 	kfree(wilc->tx_buffer);
 	wilc->tx_buffer = NULL;
-	wilc->hif_func->hif_deinit(NULL);
+	wilc->hif_func->hif_deinit(wilc);
 }
 
 static int wilc_wlan_cfg_commit(struct wilc_vif *vif, int type,
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index 150648b2c872..8b7c3d1034ec 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -374,6 +374,7 @@  struct wilc_hif_func {
 	int (*enable_interrupt)(struct wilc *nic);
 	void (*disable_interrupt)(struct wilc *nic);
 	int (*hif_reset)(struct wilc *wilc);
+	bool (*hif_is_init)(struct wilc *wilc);
 };
 
 #define WILC_MAX_CFG_FRAME_SIZE		1468