new file mode 100644
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,8t49n241.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Renesas 8T49N241 Universal Frequency Translator
+
+description: |
+ The 8T49N241 has one fractional-feedback PLL that can be used as a
+ jitter attenuator and frequency translator. It is equipped with one
+ integer and three fractional output dividers, allowing the generation
+ of up to four different output frequencies, ranging from 8kHz to 1GHz.
+ These frequencies are completely independent of each other, the input
+ reference frequencies and the crystal reference frequency. The device
+ places virtually no constraints on input to output frequency conversion,
+ supporting all FEC rates, including the new revision of ITU-T
+ Recommendation G.709 (2009), most with 0ppm conversion error.
+ The outputs may select among LVPECL, LVDS, HCSL or LVCMOS output levels.
+
+ The driver can read a full register map from the DT, and will use that
+ register map to initialize the attached part (via I2C) when the system
+ boots. Any configuration not supported by the common clock framework
+ must be done via the full register map, including optimized settings.
+
+ The 8T49N241 accepts up to two differential or single-ended input clocks
+ and a fundamental-mode crystal input. The internal PLL can lock to either
+ of the input reference clocks or just to the crystal to behave as a
+ frequency synthesizer. The PLL can use the second input for redundant
+ backup of the primary input reference, but in this case, both input clock
+ references must be related in frequency.
+
+ All outputs are currently assumed to be LVDS, unless overridden in the
+ full register map in the DT.
+
+maintainers:
+ - Alex Helms <alexander.helms.jy@renesas.com>
+ - David Cater <david.cater.jc@renesas.com>
+
+properties:
+ compatible:
+ enum:
+ - renesas,8t49n241
+
+ reg:
+ description: I2C device address
+ enum: [ 0x7c, 0x6c, 0x7d, 0x6d, 0x7e, 0x6e, 0x7f, 0x6f ]
+
+ '#clock-cells':
+ const: 1
+
+ clock-names:
+ minItems: 1
+ maxItems: 3
+ items:
+ enum: [ xtal, clk0, clk1 ]
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ renesas,settings:
+ description: Optional, complete register map of the device.
+ Optimized settings for the device must be provided in full
+ and are written during initialization.
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 791
+ maxItems: 791
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ /* 25MHz reference clock */
+ clk0: clk0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ i2c@0 {
+ reg = <0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ renesas8t49n241_1: clock-generator@6c {
+ compatible = "renesas,8t49n241";
+ reg = <0x6c>;
+ #clock-cells = <1>;
+
+ clocks = <&clk0>;
+ clock-names = "clk0";
+ };
+ };
+
+ /* Consumer referencing the 8T49N241 Q1 */
+ consumer {
+ /* ... */
+ clocks = <&renesas8t49n241_1 1>;
+ /* ... */
+ };
+ - |
+ /* 40MHz crystal */
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ i2c@0 {
+ reg = <0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ renesas8t49n241_2: clock-generator@6c {
+ compatible = "renesas,8t49n241";
+ reg = <0x6c>;
+ #clock-cells = <1>;
+
+ clocks = <&xtal>;
+ clock-names = "xtal";
+
+ renesas,settings=[
+ 09 50 00 60 67 C5 6C FF 03 00 30 00 00 01 00 00
+ 01 07 00 00 07 00 00 77 6D 06 00 00 00 00 00 FF
+ FF FF FF 00 3F 00 2A 00 16 33 33 00 01 00 00 D0
+ 00 00 00 00 00 00 00 00 00 04 00 00 00 02 00 00
+ 00 00 00 00 00 00 00 17 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 D7 0A 2B 20 00 00 00 0B
+ 00 00 00 00 00 00 00 00 00 00 27 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ C3 00 08 01 00 00 00 00 00 00 00 00 00 30 00 00
+ 00 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 85 00 00 9C 01 D4 02 71 07 00 00 00
+ 00 83 00 10 02 08 8C
+ ];
+ };
+ };
+
+ /* Consumer referencing the 8T49N241 Q1 */
+ consumer {
+ /* ... */
+ clocks = <&renesas8t49n241_2 1>;
+ /* ... */
+ };
@@ -15778,6 +15778,12 @@ L: linux-remoteproc@vger.kernel.org
S: Maintained
F: drivers/net/wwan/rpmsg_wwan_ctrl.c
+RENESAS 8T49N24X DRIVER
+M: Alex Helms <alexander.helms.jy@renesas.com>
+M: David Cater <david.cater.jc@renesas.com>
+S: Odd Fixes
+F: Documentation/devicetree/bindings/clock/renesas,8t49n241.yaml
+
RENESAS CLOCK DRIVERS
M: Geert Uytterhoeven <geert+renesas@glider.be>
L: linux-renesas-soc@vger.kernel.org
Renesas 8T49N241 has 4 outputs, 1 integral and 3 fractional dividers. The 8T49N241 accepts up to two differential or single-ended input clocks and a fundamental-mode crystal input. The internal PLL can lock to either of the input reference clocks or to the crystal to behave as a frequency synthesizer. Signed-off-by: Alex Helms <alexander.helms.jy@renesas.com> --- .../bindings/clock/renesas,8t49n241.yaml | 190 ++++++++++++++++++ MAINTAINERS | 6 + 2 files changed, 196 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/renesas,8t49n241.yaml